openwrtv4/target/linux/brcm2708/patches-4.9/950-0196-BCM2835-V4L2-Ensure-H264-header-bytes-get-a-sensible.patch
Rafał Miłecki fce21ae4cc brcm2708: rename all patches from raspberrypi git tree to use 950 prefix
Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-03-24 08:06:35 +01:00

87 lines
3.3 KiB
Diff

From 02ceda02182f6cb538be397b8d8f34b64a254559 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Mon, 13 Feb 2017 11:10:50 +0000
Subject: [PATCH] BCM2835-V4L2: Ensure H264 header bytes get a sensible
timestamp
H264 header come off VC with 0 timestamps, which means they get a
strange timestamp when processed with VC/kernel start times,
particularly if used with the inline header option.
Remember the last frame timestamp and use that if set, or otherwise
use the kernel start time.
https://github.com/raspberrypi/linux/issues/1836
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---
drivers/media/platform/bcm2835/bcm2835-camera.c | 30 ++++++++++++++++++++++---
drivers/media/platform/bcm2835/bcm2835-camera.h | 2 ++
2 files changed, 29 insertions(+), 3 deletions(-)
--- a/drivers/media/platform/bcm2835/bcm2835-camera.c
+++ b/drivers/media/platform/bcm2835/bcm2835-camera.c
@@ -356,8 +356,13 @@ static void buffer_cb(struct vchiq_mmal_
}
} else {
if (dev->capture.frame_count) {
- if (dev->capture.vc_start_timestamp != -1 &&
- pts != 0) {
+ if (dev->capture.vc_start_timestamp == -1) {
+ buf->vb.vb2_buf.timestamp = ktime_get_ns();
+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+ "Buffer time set as current time - %lld",
+ buf->vb.vb2_buf.timestamp);
+
+ } else if(pts != 0) {
struct timeval timestamp;
s64 runtime_us = pts -
dev->capture.vc_start_timestamp;
@@ -390,10 +395,27 @@ static void buffer_cb(struct vchiq_mmal_
buf->vb.vb2_buf.timestamp = timestamp.tv_sec * 1000000000ULL +
timestamp.tv_usec * 1000ULL;
} else {
- buf->vb.vb2_buf.timestamp = ktime_get_ns();
+ if (dev->capture.last_timestamp) {
+ buf->vb.vb2_buf.timestamp = dev->capture.last_timestamp;
+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+ "Buffer time set as last timestamp - %lld",
+ buf->vb.vb2_buf.timestamp);
+ }
+ else {
+ buf->vb.vb2_buf.timestamp =
+ dev->capture.kernel_start_ts.tv_sec * 1000000000ULL +
+ dev->capture.kernel_start_ts.tv_usec * 1000ULL;
+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+ "Buffer time set as start timestamp - %lld",
+ buf->vb.vb2_buf.timestamp);
+ }
}
+ dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp;
vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length);
+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+ "Buffer has ts %llu",
+ dev->capture.last_timestamp);
vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS &&
@@ -559,6 +581,8 @@ static int start_streaming(struct vb2_qu
"Start time %lld size %d\n",
dev->capture.vc_start_timestamp, parameter_size);
+ dev->capture.last_timestamp = 0;
+
v4l2_get_timestamp(&dev->capture.kernel_start_ts);
/* enable the camera port */
--- a/drivers/media/platform/bcm2835/bcm2835-camera.h
+++ b/drivers/media/platform/bcm2835/bcm2835-camera.h
@@ -93,6 +93,8 @@ struct bm2835_mmal_dev {
s64 vc_start_timestamp;
/* Kernel start timestamp for streaming */
struct timeval kernel_start_ts;
+ /* Timestamp of last frame */
+ u64 last_timestamp;
struct vchiq_mmal_port *port; /* port being used for capture */
/* camera port being used for capture */