openwrtv4/target/linux/cns3xxx/patches-4.9/070-i2c_support.patch
Koen Vandeputte 1db4135e32 cns3xxx: add preliminary 4.9 support
Adds preliminary kernel 4.9 support for this target.

- Refreshed/Updated all patches

Added 3 new patches:
- 093 --> Add virtual PCI MMIO mapping
- 230 --> Remove deprecated code
- 240 --> Rework AT24 eeprom code to use the new NVMEM API

Compiled & tested on cns3xxx (gw2388)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-02-10 11:05:57 +01:00

31 lines
1.1 KiB
Diff

--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -441,6 +441,18 @@ config I2C_CBUS_GPIO
This driver can also be built as a module. If so, the module
will be called i2c-cbus-gpio.
+config I2C_CNS3XXX
+ tristate "Cavium CNS3xxx I2C driver"
+ depends on ARCH_CNS3XXX
+ help
+ Support for Cavium CNS3xxx I2C controller driver.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-cns3xxx.
+
+ Please note that this driver might be needed to bring up other
+ devices such as Cavium CNS3xxx Ethernet.
+
config I2C_CPM
tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
depends on CPM1 || CPM2
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -114,6 +114,7 @@ obj-$(CONFIG_I2C_VIPERBOARD) += i2c-vipe
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o
obj-$(CONFIG_I2C_BRCMSTB) += i2c-brcmstb.o
+obj-$(CONFIG_I2C_CNS3XXX) += i2c-cns3xxx.o
obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_OPAL) += i2c-opal.o