openwrtv4/package/network/ipv6/ipv6-support/files/support.sh

374 lines
8.7 KiB
Bash

#!/bin/sh
# Copyright (c) 2012 OpenWrt.org
. /lib/functions.sh
. /lib/functions/service.sh
. /lib/functions/network.sh
config_load network6
conf_get() {
local __return="$1"
local __device="$2"
local __option="$3"
local __value=$(cat "/proc/sys/net/ipv6/conf/$device/$option")
eval "$__return=$__value"
}
conf_set() {
local device="$1"
local option="$2"
local value="$3"
echo "$value" > "/proc/sys/net/ipv6/conf/$device/$option"
}
stop_service() {
local __exe="$1"
SERVICE_PID_FILE="$2"
local __return="$3"
service_check "$__exe" && {
service_stop "$__exe"
[ -n "$__return" ] && eval "$__return=1"
}
rm -f "$SERVICE_PID_FILE"
}
start_service() {
local cmd="$1"
local pidfile="$2"
SERVICE_DAEMONIZE=1
SERVICE_WRITE_PID=1
SERVICE_PID_FILE="$pidfile"
service_start $cmd
}
resolve_network_add() {
local __section="$1"
local __device="$2"
local __return="$3"
local __cdevice
network_get_device __cdevice "$__section"
[ "$__cdevice" != "$__device" ] && return
eval "$__return"'="'"$__section"'"'
}
resolve_network() {
local __return="$1"
local __device="$2"
config_foreach resolve_network_add interface "$__device" "$__return"
}
announce_prefix() {
local prefix="$1"
local network="$2"
local cmd="$3"
local addr=$(echo "$prefix" | cut -d/ -f1)
local rem=$(echo "$prefix" | cut -d/ -f2)
local length=$(echo "$rem" | cut -d, -f1)
local prefer=""
local valid=""
# If preferred / valid provided
[ "$rem" != "$length" ] && {
prefer=$(echo "$rem" | cut -d, -f2)
valid=$(echo "$rem" | cut -d, -f3)
}
local msg='{"network": "'"$network"'", "prefix": "'"$addr"'", "length": '"$length"
[ -n "$valid" ] && msg="$msg"', "valid": '"$valid"', "preferred": '"$prefer"
[ -z "$cmd" ] && cmd=newprefix
ubus call 6distributed "$cmd" "$msg}"
}
disable_router() {
local network="$1"
# Notify the address distribution daemon
ubus call 6distributed deliface '{"network": "'"$network"'"}'
# Disable advertisement daemon
stop_service /usr/sbin/6relayd "/var/run/ipv6-router-$network.pid"
}
restart_relay_slave() {
local __section="$1"
local __master="$2"
network_is_up "$__section" || return
local __device=""
network_get_device __device "$__section"
local __cmaster=""
config_get __cmaster "$__section" relay_master
[ "$__master" == "$__cmaster" ] && {
disable_interface "$__section"
enable_interface "$__section" "$__device"
}
}
add_relay_slave() {
local __section="$1"
local __return="$2"
local __master="$3"
local __mode="$4"
network_is_up "$__section" || return
# Get device
local __device=""
network_get_device __device "$__section"
# Match master network
local __cmaster=""
config_get __cmaster "$__section" relay_master
[ "$__master" == "$__cmaster" ] || return
# Test slave mode
local __cmode=""
config_get __cmode "$__section" mode
[ "$__cmode" == "downstream" ] && __cmode="router"
# Don't start fallback interfaces if we are in forced-relay mode
[ "$__cmode" == "relay" -o "$__mode" == "fallback" ] || return
# Don't make non-relay or non-router interfaces slaves
[ "$__cmode" == "relay" -o "$__cmode" == "router" ] || return
# Disable any active distribution
[ "$__cmode" == "router" ] && disable_router "$__section"
eval "$__return"'="$'"$__return"' '"$__device"'"'
}
stop_relay() {
local network="$1"
local pid_fallback="/var/run/ipv6-relay-fallback-$network.pid"
local pid_forced="/var/run/ipv6-relay-forced-$network.pid"
local was_fallback=""
stop_service /usr/sbin/6relayd "$pid_fallback" was_fallback
stop_service /usr/sbin/6relayd "$pid_forced"
# Reenable normal distribution on slave interfaces
[ -n "$was_fallback" ] && config_foreach restart_relay_slave interface "$network"
}
detect_forced_relay_mode() {
local __section="$1"
local __mode="$2"
local __cmode
config_get __cmode "$__section" mode
[ "$__cmode" == "relay" ] && eval "$__mode=forced"
}
restart_relay() {
local network="$1"
local mode="$2"
# Stop last active relay
stop_relay "$network"
# Detect if we have a forced-relay
[ -z "$mode" ] && config_foreach detect_forced_relay_mode interface mode
# Don't start without a mode
[ -z "$mode" ] && return
# Detect master device
local device=""
network_get_device device "$network"
# Generate command string
local cmd="/usr/sbin/6relayd -A $device"
local ifaces=""
config_foreach add_relay_slave interface ifaces "$network" "$mode"
# Start relay
local pid="/var/run/ipv6-relay-$mode-$network.pid"
[ -n "$ifaces" ] && start_service "$cmd $ifaces" "$pid"
# There are no slave interface, however indicate that we want to relay
[ -z "$ifaces" ] && touch "$pid"
}
restart_master_relay() {
local network="$1"
local mode="$2"
local pid_fallback="/var/run/ipv6-relay-fallback-$network.pid"
local pid_forced="/var/run/ipv6-relay-forced-$network.pid"
# Disable active relaying to this interface
config_get relay_master "$network" relay_master
[ -z "$relay_master" ] && return
network_is_up "$relay_master" || return
# Detect running mode
[ -z "$mode" && -f "$pid_fallback" ] && mode="fallback"
[ -z "$mode" && -f "$pid_forced" ] && mode="forced"
# Restart relay if running or start requested
[ -n "$mode" ] && restart_relay "$relay_master" "$mode"
}
disable_interface() {
local network="$1"
# Delete all prefixes routed to this interface
ubus call 6distributed delprefix '{"network": "'"$network"'"}'
# Restart Relay
restart_master_relay "$network"
# Disable distribution
disable_router "$network"
# Disable relay
stop_relay "$network"
# Disable DHCPv6 client if enabled, state script will take care
stop_service /usr/sbin/odhcp6c "/var/run/ipv6-dhcpv6-$network.pid"
}
enable_static() {
local network="$1"
local device="$2"
# Enable global forwarding
local global_forward
conf_get global_forward all forwarding
[ "$global_forward" != "1" ] && conf_set all forwarding 1
# Configure device
conf_set "$device" accept_ra 1
conf_set "$device" forwarding 1
# ULA-integration
local ula_prefix=""
config_get ula_prefix "$network" ula_prefix
# ULA auto configuration (first init)
[ "$ula_prefix" == "auto" ] && {
local r1=""
local r2=""
local r3=""
# Sometimes results are empty, therefore try until it works...
while [ -z "$r1" -o -z "$r2" -o -z "$r3" ]; do
r1=$(printf "%02x" $(($(</dev/urandom tr -dc 0-9 | dd bs=9 count=1) % 256)))
r2=$(printf "%01x" $(($(</dev/urandom tr -dc 0-9 | dd bs=9 count=1) % 65536)))
r3=$(printf "%01x" $(($(</dev/urandom tr -dc 0-9 | dd bs=9 count=1) % 65536)))
done
ula_prefix="fd$r1:$r2:$r3::/48"
# Save prefix so it will be preserved across reboots
uci set network6.$network.ula_prefix=$ula_prefix
uci commit network6
}
# Announce ULA
[ -n "$ula_prefix" ] && announce_prefix $ula_prefix $network
# Announce all static prefixes
config_list_foreach "$network" static_prefix announce_prefix $network
# start relay if there are forced relay members
restart_relay "$network"
}
enable_router() {
local network="$1"
local device="$2"
# Get IPv6 prefixes
local length
config_get length "$network" advertise_prefix
[ -z "$length" ] && length=64
[ "$length" -ne "0" ] && ubus call 6distributed newiface '{"network": "'"$network"'", "iface": "'"$device"'", "length": '"$length"'}'
# Start RD & DHCPv6 service
local pid="/var/run/ipv6-router-$network.pid"
start_service "/usr/sbin/6relayd -Rserver -Dserver . $device" "$pid"
# Try relaying if necessary
restart_master_relay "$network"
}
enable_dhcpv6() {
local network="$1"
local device="$2"
# Configure device
conf_set "$device" accept_ra 2
conf_set "$device" forwarding 2
# Trigger RS
conf_set "$device" disable_ipv6 1
conf_set "$device" disable_ipv6 0
# Configure DHCPv6-client
local dhcp6_opts="$device"
# Configure DHCPv6-client (e.g. requested prefix)
local request_prefix
config_get request_prefix "$network" request_prefix
[ -z "$request_prefix" ] && request_prefix="auto"
[ "$request_prefix" != "no" ] && {
[ "$request_prefix" == "auto" ] && request_prefix=0
dhcp6_opts="-P$request_prefix $dhcp6_opts"
}
# Start DHCPv6 client
local pid="/var/run/ipv6-dhcpv6-$network.pid"
start_service "/usr/sbin/odhcp6c -s/lib/ipv6/dhcpv6.sh $dhcp6_opts" "$pid"
# Refresh RA on all interfaces
for pid in /var/run/ipv6-router-*.pid; do
kill -SIGUSR1 $(cat "$pid")
done
}
enable_interface()
{
local network="$1"
local device="$2"
local mode=""
config_get mode "$network" mode
# Compatibility with old mode names
[ "$mode" == "downstream" ] && mode=router
[ "$mode" == "upstream" ] && mode=dhcpv6
# Run mode startup code
[ "$mode" == "dhcpv6" -o "$mode" == "static" ] && enable_static "$network" "$device"
[ "$mode" == "dhcpv6" ] && enable_dhcpv6 "$network" "$device"
[ "$mode" == "router" ] && enable_router "$network" "$device"
[ "$mode" == "relay" ] && restart_master_relay "$network" forced
}