openwrtv4/target/linux/brcm2708/patches-4.9/950-0082-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch
Rafał Miłecki fce21ae4cc brcm2708: rename all patches from raspberrypi git tree to use 950 prefix
Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-03-24 08:06:35 +01:00

168 lines
5.4 KiB
Diff

From 999d3e615247d1921d245f7084194efbc697bb66 Mon Sep 17 00:00:00 2001
From: DigitalDreamtime <clive.messer@digitaldreamtime.co.uk>
Date: Sat, 2 Jul 2016 16:26:19 +0100
Subject: [PATCH] Add support for Dion Audio LOCO DAC-AMP HAT
Using dedicated machine driver and pcm5102a codec driver.
Signed-off-by: DigitalDreamtime <clive.messer@digitaldreamtime.co.uk>
---
sound/soc/bcm/Kconfig | 7 +++
sound/soc/bcm/Makefile | 3 +-
sound/soc/bcm/dionaudio_loco.c | 121 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 130 insertions(+), 1 deletion(-)
create mode 100644 sound/soc/bcm/dionaudio_loco.c
--- a/sound/soc/bcm/Kconfig
+++ b/sound/soc/bcm/Kconfig
@@ -116,3 +116,10 @@ config SND_DIGIDAC1_SOUNDCARD
select SND_SOC_WM8741
help
Say Y or M if you want to add support for Red Rocks Audio DigiDAC1 board.
+
+config SND_BCM2708_SOC_DIONAUDIO_LOCO
+ tristate "Support for Dion Audio LOCO DAC-AMP"
+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+ select SND_SOC_PCM5102a
+ help
+ Say Y or M if you want to add support for Dion Audio LOCO.
--- a/sound/soc/bcm/Makefile
+++ b/sound/soc/bcm/Makefile
@@ -23,6 +23,7 @@ snd-soc-iqaudio-digi-objs := iqaudio_dig
snd-soc-raspidac3-objs := raspidac3.o
snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o
snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o
+snd-soc-dionaudio-loco-objs := dionaudio_loco.o
obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o
obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o
@@ -38,4 +39,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DIG
obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o
obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o
obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o
-
+obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o
--- /dev/null
+++ b/sound/soc/bcm/dionaudio_loco.c
@@ -0,0 +1,121 @@
+/*
+ * ASoC Driver for Dion Audio LOCO DAC-AMP
+ *
+ * Author: Miquel Blauw <info@dionaudio.nl>
+ * Copyright 2016
+ *
+ * Based on the software of the RPi-DAC writen by Florian Meier
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+static int snd_rpi_dionaudio_loco_hw_params(
+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+ unsigned int sample_bits =
+ snd_pcm_format_physical_width(params_format(params));
+
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2);
+}
+
+/* machine stream operations */
+static struct snd_soc_ops snd_rpi_dionaudio_loco_ops = {
+ .hw_params = snd_rpi_dionaudio_loco_hw_params,
+};
+
+static struct snd_soc_dai_link snd_rpi_dionaudio_loco_dai[] = {
+{
+ .name = "DionAudio LOCO",
+ .stream_name = "DionAudio LOCO DAC-AMP",
+ .cpu_dai_name = "bcm2708-i2s.0",
+ .codec_dai_name = "pcm5102a-hifi",
+ .platform_name = "bcm2708-i2s.0",
+ .codec_name = "pcm5102a-codec",
+ .dai_fmt = SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS,
+ .ops = &snd_rpi_dionaudio_loco_ops,
+},
+};
+
+/* audio machine driver */
+static struct snd_soc_card snd_rpi_dionaudio_loco = {
+ .name = "snd_rpi_dionaudio_loco",
+ .dai_link = snd_rpi_dionaudio_loco_dai,
+ .num_links = ARRAY_SIZE(snd_rpi_dionaudio_loco_dai),
+};
+
+static int snd_rpi_dionaudio_loco_probe(struct platform_device *pdev)
+{
+ struct device_node *np;
+ int ret = 0;
+
+ snd_rpi_dionaudio_loco.dev = &pdev->dev;
+
+ np = pdev->dev.of_node;
+ if (np) {
+ struct snd_soc_dai_link *dai = &snd_rpi_dionaudio_loco_dai[0];
+ struct device_node *i2s_np;
+
+ i2s_np = of_parse_phandle(np, "i2s-controller", 0);
+ if (i2s_np) {
+ dai->cpu_dai_name = NULL;
+ dai->cpu_of_node = i2s_np;
+ dai->platform_name = NULL;
+ dai->platform_of_node = i2s_np;
+ }
+ }
+
+ ret = snd_soc_register_card(&snd_rpi_dionaudio_loco);
+ if (ret)
+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+ ret);
+
+ return ret;
+}
+
+static int snd_rpi_dionaudio_loco_remove(struct platform_device *pdev)
+{
+ return snd_soc_unregister_card(&snd_rpi_dionaudio_loco);
+}
+
+static const struct of_device_id snd_rpi_dionaudio_loco_of_match[] = {
+ { .compatible = "dionaudio,loco-pcm5242-tpa3118", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, snd_rpi_dionaudio_loco_of_match);
+
+static struct platform_driver snd_rpi_dionaudio_loco_driver = {
+ .driver = {
+ .name = "snd-dionaudio-loco",
+ .owner = THIS_MODULE,
+ .of_match_table = snd_rpi_dionaudio_loco_of_match,
+ },
+ .probe = snd_rpi_dionaudio_loco_probe,
+ .remove = snd_rpi_dionaudio_loco_remove,
+};
+
+module_platform_driver(snd_rpi_dionaudio_loco_driver);
+
+MODULE_AUTHOR("Miquel Blauw <info@dionaudio.nl>");
+MODULE_DESCRIPTION("ASoC Driver for DionAudio LOCO");
+MODULE_LICENSE("GPL v2");