No description
Find a file
Lars-Peter Clausen 5f9f23534b Fixed support for Iomega
* Added configuration file.
* Set blue power led during bootup
* enabled pci express

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 23683
2010-10-27 21:24:06 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include add support for darcs repositories 2010-10-24 12:36:44 +00:00
package Fixed support for Iomega 2010-10-27 21:24:06 +00:00
scripts add support for darcs-based feeds 2010-10-24 12:36:51 +00:00
target Adds leds and gpio keys support for Iomega iConnect. 2010-10-27 21:22:07 +00:00
toolchain gcc 4.4.5 support 2010-10-04 12:21:58 +00:00
tools tools/mtd-utils: add two upstream patches 2010-10-15 07:52:37 +00:00
.gitignore .gitignore: Undo accidental commit. 2010-05-10 17:59:05 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in as we only support 2.6, remove the useless bool for it 2010-10-05 14:19:00 +00:00
feeds.conf.default Add lxde feed to feeds.conf.default 2010-08-12 19:03:44 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk Add HOST_FPIC. It currently always is -fPIC, because that should work on all platforms, even if it may generate slightly inefficient code on some arches. 2010-10-23 20:30:43 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org