No description
5dc134c542
This patch allows VLYNQ devices on the DG834Gv1 to be successfully enabled. Currently the "__vlynq_enable_device" function attempts to set the VLYNQ device clock divisor to values from 1 through 8 until a link is successfully established. On the DG834Gv1 (but not the DG834Gv2), setting the VLYNQ device clock divisor to 1 (full rate) results in all further VLYNQ operations failing (including software reset), so the device is never enabled. This patches changes the function to only attempt divisors 2 through 8, and hence the device is successfully enabled. Signed-off-by: Nick Forbes <nick.forbes@huntsworth.com> --------- SVN-Revision: 9656 |
||
|---|---|---|
| docs | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| feeds.conf | ||
| LICENSE | ||
| Makefile | ||
| README | ||
| rules.mk | ||
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, bison, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org