openwrtv4/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
Gabor Juhos 76b5a9aa7d ar71xx: routerboot: add support for extended radio data
On newer Mikrotik boards, the radio calibration data
is stored differently and uses LZO compression instead
of RLE.

Update the RouterBOOT helper code to support the new
format.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45297
2015-04-07 20:03:35 +00:00

1530 lines
46 KiB
Diff

--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -16,22 +16,190 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */
+ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */
+ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
+ ATH79_MACH_ALL0305, /* Allnet ALL0305 */
+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
+ ATH79_MACH_AP113, /* Atheros AP113 reference board */
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
+ ATH79_MACH_AP132, /* Atheros AP132 reference board */
ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */
ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
+ ATH79_MACH_AP83, /* Atheros AP83 */
+ ATH79_MACH_AP96, /* Atheros AP96 */
+ ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
+ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
+ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
+ ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DGL_5500_A1, /* D-link DGL-5500 rev. A1 */
+ ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */
+ ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */
+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
+ ATH79_MACH_DIR_615_E1, /* D-Link DIR-615 rev. E1 */
+ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
+ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
+ ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */
+ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */
+ ATH79_MACH_ESR900, /* EnGenius ESR900 */
+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
+ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
+ ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */
+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
+ ATH79_MACH_EL_M150, /* EasyLink EL-M150 */
+ ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */
+ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
+ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
+ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
+ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
+ ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */
+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
+ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
+ ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
+ ATH79_MACH_MR600, /* OpenMesh MR600 */
+ ATH79_MACH_MR900, /* OpenMesh MR900 */
+ ATH79_MACH_MR900v2, /* OpenMesh MR900v2 */
+ ATH79_MACH_MYNET_N600, /* WD My Net N600 */
+ ATH79_MACH_MYNET_N750, /* WD My Net N750 */
+ ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */
+ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
+ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
+ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
+ ATH79_MACH_NBG6716, /* Zyxel NBG6716 */
+ ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */
+ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
+ ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
+ ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */
+ ATH79_MACH_OM2P, /* OpenMesh OM2P */
+ ATH79_MACH_OM5P, /* OpenMesh OM5P */
+ ATH79_MACH_PB42, /* Atheros PB42 */
+ ATH79_MACH_PB92, /* Atheros PB92 */
+ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
+ ATH79_MACH_R6100, /* NETGEAR R6100 */
+ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
+ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
+ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
+ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */
+ ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */
+ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */
+ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
+ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
+ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
+ ATH79_MACH_RB_711GR100, /* Mikrotik RouterBOARD 911/912 boards */
+ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
+ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
+ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
+ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
+ ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
+ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
+ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
+ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
+ ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */
+ ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */
+ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
+ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
+ ATH79_MACH_RW2458N, /* Redwave RW2458N */
+ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
+ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
+ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
+ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
+ ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */
+ ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */
+ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
+ ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */
+ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */
+ ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */
+ ATH79_MACH_TL_MR3040_V2, /* TP-LINK TL-MR3040 v2 */
+ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
+ ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */
+ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
+ ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */
+ ATH79_MACH_TL_WA701ND_V2, /* TP-LINK TL-WA701ND v2 */
+ ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */
+ ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */
+ ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/
+ ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */
+ ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */
+ ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */
+ ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */
+ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
+ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
+ ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */
+ ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
+ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
+ ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */
+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
+ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
+ ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */
+ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
+ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
+ ATH79_MACH_TL_WR710N, /* TP-LINK TL-WR710N */
+ ATH79_MACH_TL_WR720N_V3, /* TP-LINK TL-WR720N v3 */
+ ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
+ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/
+ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
+ ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */
+ ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */
+ ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */
+ ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */
+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
+ ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */
+ ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */
+ ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
+ ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
+ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
+ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
+ ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */
ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
+ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
+ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
+ ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
+ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
+ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
+ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
+ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
+ ATH79_MACH_WLR8100, /* SITECOM WLR-8100 */
+ ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */
+ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
+ ATH79_MACH_WNDR3700_V4, /* NETGEAR WNDR3700v4 */
+ ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
+ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
+ ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */
+ ATH79_MACH_WNR2000_V4, /* NETGEAR WNR2000 v4 */
+ ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
+ ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
+ ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */
+ ATH79_MACH_WP543, /* Compex WP543 */
+ ATH79_MACH_WPE72, /* Compex WPE72 */
+ ATH79_MACH_WPJ558, /* Compex WPJ558 */
+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
+ ATH79_MACH_WRT400N, /* Linksys WRT400N */
+ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
+ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
+ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
+ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
+ ATH79_MACH_WZR_450HP2, /* Buffalo WZR-450HP2 */
+ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
+ ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
};
#endif /* _ATH79_MACHTYPE_H */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -2,6 +2,70 @@ if ATH79
menu "Atheros AR71XX/AR724X/AR913X machine selection"
+config ATH79_MACH_ALFA_AP96
+ bool "ALFA Network AP96 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_HORNET_UB
+ bool "ALFA Network Hornet-UB board support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_ALFA_NX
+ bool "ALFA Network N2/N5 board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TUBE2H
+ bool "ALFA Network Tube2H board support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_ALL0258N
+ bool "Allnet ALL0258N support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_ALL0315N
+ bool "Allnet ALL0315N support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_AP113
+ bool "Atheros AP113 board support"
+ select SOC_AR724X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_PB9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+ select ATH79_DEV_ETH
+
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
@@ -11,62 +75,976 @@ config ATH79_MACH_AP121
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros AP121 reference board.
+ help
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP121 reference board.
+
+config ATH79_MACH_AP132
+ bool "Atheros AP132 reference board"
+ select SOC_QCA955X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP132 reference boards.
+
+config ATH79_MACH_AP136
+ bool "Atheros AP136/AP135 reference board"
+ select SOC_QCA955X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_NFC
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP136 or AP135 reference boards.
+
+config ATH79_MACH_AP81
+ bool "Atheros AP81 reference board"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP81 reference board.
+
+config ATH79_MACH_AP83
+ bool "Atheros AP83 board support"
+ select SOC_AR913X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_AP96
+ bool "Atheros AP96 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_DB120
+ bool "Atheros DB120 reference board"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
+ Say 'Y' here if you want your kernel to support the
+ Atheros DB120 reference board.
+
+config ATH79_MACH_PB42
+ bool "Atheros PB42 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_PB44
+ bool "Atheros PB44 reference board"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_SPI
+ select ATH79_DEV_USB
+ help
+ Say 'Y' here if you want your kernel to support the
+ Atheros PB44 reference board.
+
+config ATH79_MACH_PB92
+ bool "Atheros PB92 board support"
+ select SOC_AR724X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_PB9X_PCI if PCI
+ select ATH79_DEV_USB
+
+config ATH79_MACH_AW_NR580
+ bool "AzureWave AW-NR580 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_F9K1115V2
+ bool "Belkin AC1750DB board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_ESR1750
+ bool "EnGenius ESR1750 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_WHR_HP_G300N
+ bool "Buffalo WHR-HP-G300N board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_WLAE_AG300N
+ bool "Buffalo WLAE-AG300N board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_WLR8100
+ bool "Sitecom WLR-8100 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_WZR_HP_AG300H
+ bool "Buffalo WZR-HP-AG300H board support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WZR_HP_G300NH
+ bool "Buffalo WZR-HP-G300NH board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select RTL8366_SMI
+
+config ATH79_MACH_WZR_HP_G300NH2
+ bool "Buffalo WZR-HP-G300NH2 board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WZR_HP_G450H
+ bool "Buffalo WZR-HP-G450H board support"
+ select SOC_AR724X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WZR_450HP2
+ bool "Buffalo WZR-450HP2 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_WP543
+ bool "Compex WP543/WPJ543 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select MYLOADER
+
+config ATH79_MACH_WPE72
+ bool "Compex WPE72/WPE72NX board support"
+ select SOC_AR724X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select MYLOADER
+
+config ATH79_MACH_WPJ558
+ bool "Compex WPJ558 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_DGL_5500_A1
+ bool "D-Link DGL-5500 A1 support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_USB
+
+config ATH79_MACH_DHP_1565_A1
+ bool "D-Link DHP-1565 rev. A1 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_DIR_505_A1
+ bool "D-Link DIR-505-A1 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_DIR_600_A1
+ bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_NVRAM
+
+config ATH79_MACH_DIR_615_C1
+ bool "D-Link DIR-615 rev. C1 support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_DIR_825_B1
+ bool "D-Link DIR-825 rev. B1 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_DIR_825_C1
+ bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_DRAGINO2
+ bool "DRAGINO V2 support"
+ select SOC_AR933X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_ETH
+ select ATH79_DEV_USB
+
+config ATH79_MACH_ESR900
+ bool "EnGenius ESR900 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_EW_DORIN
+ bool "embedded wireless Dorin Platform support"
+ select SOC_AR933X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_ETH
+ help
+ Say 'Y' here if you want your kernel to support the
+ Dorin Platform from www.80211.de .
+
+config ATH79_MACH_EL_M150
+ bool "EasyLink EL-M150 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_EL_MINI
+ bool "EasyLink EL-MINI support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_GL_INET
+ bool "GL-INET support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_EAP300V2
+ bool "EnGenius EAP300 v2 support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_GS_OOLITE
+ bool "GS Oolite V1 support"
+ select SOC_AR933X
+ select ARH79_DEV_ETH
+ select ARH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_HIWIFI_HC6361
+ bool "HiWiFi HC6361 board support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_JA76PF
+ bool "jjPlus JA76PF board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_JWAP003
+ bool "jjPlus JWAP003 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WRT160NL
+ bool "Linksys WRT160NL board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_WRT400N
+ bool "Linksys WRT400N board support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_R6100
+ bool "NETGEAR R6100 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_RB4XX
+ bool "MikroTik RouterBOARD 4xx series support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+
+config ATH79_MACH_RB750
+ bool "MikroTik RouterBOARD 750 support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_USB
+ select ATH79_ROUTERBOOT
+
+config ATH79_MACH_RB91X
+ bool "MikroTik RouterBOARD 91X support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_SPI
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_USB
+ select ATH79_ROUTERBOOT
+
+config ATH79_MACH_RB95X
+ bool "MikroTik RouterBOARD 95X support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_NFC
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_USB
+ select ATH79_ROUTERBOOT
+
+config ATH79_MACH_RB2011
+ bool "MikroTik RouterBOARD 2011 support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_ROUTERBOOT
+
+config ATH79_MACH_RBSXTLITE
+ bool "MikroTik RouterBOARD SXT Lite"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_NFC
+ select ATH79_DEV_WMAC
+ select ATH79_ROUTERBOOT
+
+config ATH79_MACH_SMART_300
+ bool "NC-LINK SMART-300 board support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_WNDAP360
+ bool "NETGEAR WNDAP360 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_WNDR3700
+ bool "NETGEAR WNDR3700 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WNDR4300
+ bool "NETGEAR WNDR3700v4/WNDR4300 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_WNR2000
+ bool "NETGEAR WNR2000 board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_WNR2000_V3
+ bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2 board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+ config ATH79_MACH_WNR2200
+ bool "NETGEAR WNR2200 board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WNR2000_V4
+ bool "NETGEAR WNR2000 V4"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_OM2P
+ bool "OpenMesh OM2P board support"
+ select SOC_AR724X
+ select SOC_AR933X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_OM5P
+ bool "OpenMesh OM5P board support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_MR600
+ bool "OpenMesh MR600 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_MZK_W04NU
+ bool "Planex MZK-W04NU board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_MZK_W300NH
+ bool "Planex MZK-W300NH board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_RW2458N
+ bool "Redwave RW2458N board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_CAP4200AG
+ bool "Senao CAP4200AG support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_MR900
+ bool "OpenMesh MR900 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_EAP7660D
+ bool "Senao EAP7660D support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_ARCHER_C7
+ bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_CPE510
+ bool "TP-LINK CPE510 support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_MR11U
+ bool "TP-LINK TL-MR11U/TL-MR3040 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_MR13U
+ bool "TP-LINK TL-MR13U support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_MR3020
+ bool "TP-LINK TL-MR3020 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_MR3X20
+ bool "TP-LINK TL-MR3220/3420 support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_TL_WAX50RE
+ bool "TP-LINK TL-WA750/850RE support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WA701ND_V2
+ bool "TP-LINK TL-WA701ND v2 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
-config ATH79_MACH_AP136
- bool "Atheros AP136/AP135 reference board"
- select SOC_QCA955X
+config ATH79_MACH_TL_WA7210N_V2
+ bool "TP-LINK TL-WA7210N v2 support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WA830RE_V2
+ bool "TP-LINK TL-WA830RE v2 support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_NFC
- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros AP136 or AP135 reference boards.
-config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
+config ATH79_MACH_TL_WA901ND
+ bool "TP-LINK TL-WA901ND/TL-WA7510N support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WA901ND_V2
+ bool "TP-LINK TL-WA901ND v2 support"
select SOC_AR913X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WDR3500
+ bool "TP-LINK TL-WDR3500 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros AP81 reference board.
-config ATH79_MACH_DB120
- bool "Atheros DB120 reference board"
+config ATH79_MACH_TL_WDR4300
+ bool "TP-LINK TL-WDR3600/4300/4310 board support"
select SOC_AR934X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
- select ATH79_DEV_NFC
select ATH79_DEV_USB
select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros DB120 reference board.
-config ATH79_MACH_PB44
- bool "Atheros PB44 reference board"
+config ATH79_MACH_TL_WR703N
+ bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR720N_V3
+ bool "TP-LINK TL-WR720N v3 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR741ND
+ bool "TP-LINK TL-WR741ND support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR741ND_V4
+ bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR841N_V1
+ bool "TP-LINK TL-WR841N v1 support"
select SOC_AR71XX
+ select ATH79_DEV_DSA
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR841N_V8
+ bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR841N_V9
+ bool "TP-LINK TL-WR841N/ND v9 support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR941ND
+ bool "TP-LINK TL-WR941ND support"
+ select SOC_AR913X
+ select ATH79_DEV_DSA
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR1041N_V2
+ bool "TP-LINK TL-WR1041N v2 support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR1043ND
+ bool "TP-LINK TL-WR1043ND support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR1043ND_V2
+ bool "TP-LINK TL-WR1043ND v2 support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR2543N
+ bool "TP-LINK TL-WR2543N/ND support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_TEW_632BRP
+ bool "TRENDnet TEW-632BRP support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_TEW_673GRU
+ bool "TRENDnet TEW-673GRU support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_NVRAM
+
+config ATH79_MACH_TEW_712BR
+ bool "TRENDnet TEW-712BR support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_TEW_732BR
+ bool "TRENDnet TEW-732BR support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_UBNT
+ bool "Ubiquiti AR71xx based boards support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
select ATH79_DEV_USB
- help
- Say 'Y' here if you want your kernel to support the
- Atheros PB44 reference board.
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
@@ -83,6 +1061,97 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
+config ATH79_MACH_MYNET_N600
+ bool "WD My Net N600 board support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_MYNET_N750
+ bool "WD My Net N750 board support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_MYNET_REXT
+ bool "WD My Net Wi-Fi Range Extender board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_ZCN_1523H
+ bool "Zcomax ZCN-1523H support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_NBG460N
+ bool "Zyxel NBG460N/550N/550NH board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_NBG6716
+ bool "Zyxel NBG6716 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_CARAMBOLA2
+ bool "8devices Carambola2 board"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_BHU_BXU2000N2_A
+ bool "BHU BXU2000n-2 rev. A support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_QIHOO_C301
+ bool "Qihoo 360 C301 board support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_USB
+ select ATH79_NVRAM
+
endmenu
config SOC_AR71XX
@@ -124,7 +1193,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
-config PCI_AR724X
+config ATH79_DEV_DSA
+ def_bool n
+
+config ATH79_DEV_ETH
def_bool n
config ATH79_DEV_GPIO_BUTTONS
@@ -154,6 +1226,11 @@ config ATH79_PCI_ATH9K_FIXUP
def_bool n
config ATH79_ROUTERBOOT
+ select RLE_DECOMPRESS
+ select LZO_DECOMPRESS
+ def_bool n
+
+config PCI_AR724X
def_bool n
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -38,9 +38,119 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
+obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o
+obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
+obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
+obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
+obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
+obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o
obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
+obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
+obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
+obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o
+obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o
+obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
+obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o
+obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
+obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o
+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
+obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
+obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o
+obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
+obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
+obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
+obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
+obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o
+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
+obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
+obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
+obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
+obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o
+obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
+obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o
+obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
+obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
+obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
+obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
+obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
+obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o
+obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
+obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
+obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o
+obj-$(CONFIG_ATH79_MACH_R6100) += mach-r6100.o
+obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
+obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
+obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
+obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
+obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
+obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
+obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
+obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
+obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
+obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
+obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
+obj-$(CONFIG_ATH79_MACH_TEW_732BR) += mach-tew-732br.o
+obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
+obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o
+obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
+obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
+obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o
+obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
+obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
+obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o
+obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
+obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
+obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o
+obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o
+obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
+obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
+obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
+obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o
+obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o
+obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
+obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
+obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
+obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
+obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o
+obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
+obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
+obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o
+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
+obj-$(CONFIG_ATH79_MACH_WZR_450HP2) += mach-wzr-450hp2.o
+obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
+obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
+obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
--- a/arch/mips/ath79/prom.c
+++ b/arch/mips/ath79/prom.c
@@ -180,6 +180,12 @@ void __init prom_init(void)
ath79_prom_append_cmdline("board", env);
}
}
+
+ if (strstr(arcs_cmdline, "board=750Gr3") ||
+ strstr(arcs_cmdline, "board=951G") ||
+ strstr(arcs_cmdline, "board=2011L") ||
+ strstr(arcs_cmdline, "board=711Gr100"))
+ ath79_prom_append_cmdline("console", "ttyS0,115200");
}
void __init prom_free_prom_memory(void)