KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ramips/image/mt76x8.mk
Maxim Anisimov 5bdd238b63 ramips: add support for TP-Link Archer C20 v4 
TP-Link Archer C20 v4 is a router with 5-port FE switch and
non-detachable antennas. It's based on MediaTek MT7628N+MT7610EN.

Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 5x 10/100 Mbps Ethernet
- 3x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 7x LED (GPIO-controlled*), 2x button, power input switch

* WAN LED in this devices is a dual-color, dual-leads type which isn't
  (fully) supported by gpio-leds driver. This type of LED requires both
  GPIOs state change at the same time to select color or turn it off.
  For now, we support/use only the green part of the LED.
* MT7610EN ac chip isn't not supported by LEDE. Therefore 5Ghz won't
  work.

Flash instruction:

The only way to flash LEDE image in ArcherC20v4 is to use
tftp recovery mode in U-Boot:

1. Configure PC with static IP 192.168.0.66/24 and tftp server.
2. Rename "openwrt-ramips-mt7628-ArcherC20v4-squashfs-tftp-recovery.bin"
   to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with one of LAN ports, press the reset button, power up
   the router and keep button pressed for around 6-7 seconds, until
   device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
2018-01-15 21:45:43 +01:00

240 lines
6.2 KiB
Makefile
Raw Blame History

#
# MT76x8 Profiles
#
define Device/tplink
TPLINK_FLASHLAYOUT :=
TPLINK_HWID :=
TPLINK_HWREV :=
TPLINK_HWREVADD :=
TPLINK_HVERSION :=
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
IMAGES += tftp-recovery.bin
IMAGE/factory.bin := tplink-v2-image -e
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
check-size $$$$(IMAGE_SIZE)
endef
DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION
define Device/duzun-dm06
DTS := DUZUN-DM06
DEVICE_TITLE := DuZun DM06
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += duzun-dm06
define Device/gl-mt300n-v2
DTS := GL-MT300N-V2
IMAGE_SIZE := 16064k
DEVICE_TITLE := GL-iNet GL-MT300N-V2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += gl-mt300n-v2
define Device/hc5661a
DTS := HC5661A
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := HiWiFi HC5661A
endef
TARGET_DEVICES += hc5661a
define Device/LinkIt7688
DTS := LINKIT7688
IMAGE_SIZE := $(ralink_default_fw_size_32M)
SUPPORTED_DEVICES := linkits7688 linkits7688d
DEVICE_TITLE := MediaTek LinkIt Smart 7688
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools
endef
TARGET_DEVICES += LinkIt7688
define Device/mac1200r-v2
DTS := MAC1200RV2
DEVICE_TITLE := Mercury MAC1200R v2.0
SUPPORTED_DEVICES := mac1200rv2
endef
TARGET_DEVICES += mac1200r-v2
define Device/miwifi-nano
DTS := MIWIFI-NANO
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Xiaomi MiWiFi Nano
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += miwifi-nano
define Device/mt7628
DTS := MT7628
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_TITLE := MediaTek MT7628 EVB
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
define Device/omega2
DTS := OMEGA2
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Onion Omega2
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools
endef
TARGET_DEVICES += omega2
define Device/omega2p
DTS := OMEGA2P
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_TITLE := Onion Omega2+
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools kmod-sdhci-mt7620
endef
TARGET_DEVICES += omega2p
define Device/pbr-d1
DTS := PBR-D1
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := PBR-D1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += pbr-d1
define Device/tl-wr840n-v4
$(Device/tplink)
DTS := TL-WR840NV4
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-WR840N v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08400004
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x4
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tl-wr840n-v4
define Device/tl-wr840n-v5
DTS := TL-WR840NV5
IMAGE_SIZE := 3840k
DEVICE_TITLE := TP-Link TL-WR840N v5
TPLINK_FLASHLAYOUT := 4Mmtk
TPLINK_HWID := 0x08400005
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += tl-wr840n-v5
define Device/tl-wr841n-v13
$(Device/tplink)
DTS := TL-WR841NV13
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-WR841N v13
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08410013
TPLINK_HWREV := 0x268
TPLINK_HWREVADD := 0x13
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tl-wr841n-v13
define Device/tplink_c20-v4
$(Device/tplink)
DTS := ArcherC20v4
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link ArcherC20 v4
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc200004
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x4
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tplink_c20-v4
define Device/tplink_tl-mr3420-v5
$(Device/tplink)
DTS := TL-MR3420V5
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-MR3420 v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x34200005
TPLINK_HWREV := 0x5
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-mr3420-v5
define Device/u7628-01-128M-16M
DTS := U7628-01-128M-16M
IMAGE_SIZE := 16064k
DEVICE_TITLE := UniElec U7628-01 (128M RAM/16M flash)
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += u7628-01-128M-16M
define Device/vocore2
DTS := VOCORE2
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := VoCore VoCore2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-sdhci-mt7620
endef
TARGET_DEVICES += vocore2
define Device/vocore2lite
DTS := VOCORE2LITE
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := VoCore VoCore2-Lite
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-sdhci-mt7620
endef
TARGET_DEVICES += vocore2lite
define Device/wcr-1166ds
DTS := WCR-1166DS
BUFFALO_TAG_PLATFORM := MTK
BUFFALO_TAG_VERSION := 9.99
BUFFALO_TAG_MINOR := 9.99
IMAGES += factory.bin
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
IMAGE/factory.bin := \
trx -M 0x746f435c | pad-rootfs | append-metadata | \
buffalo-enc WCR-1166DS $$(BUFFALO_TAG_VERSION) -l | \
buffalo-tag-dhp WCR-1166DS JP JP | buffalo-enc-tag -l | \
buffalo-dhp-image
DEVICE_TITLE := Buffalo WCR-1166DS
endef
TARGET_DEVICES += wcr-1166ds
define Device/wl-wn575a3
DTS := WL-WN575A3
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_TITLE := Wavlink WL-WN575A3
endef
TARGET_DEVICES += wl-wn575a3
define Device/widora-neo
DTS := WIDORA-NEO
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Widora-NEO
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += widora-neo
define Device/wrtnode2p
DTS := WRTNODE2P
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := WRTnode 2P
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += wrtnode2p
define Device/wrtnode2r
DTS := WRTNODE2R
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := WRTnode 2R
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += wrtnode2r
Reference in a new issue View git blame Copy permalink