5ac34818f9
Currently, dynack was only tested upstream using AP/STA mode. Testing it on IBSS, showed that late-ack detection was broken. This is caused due to dynack using Association Request/Response frames for late-ack detection, which IBSS does not use. Also allowing Authentication frames here solves this. A second issue also got fixed, which was also seen AP/STA mode: When a station was added, the estimated value would be exponentially averaged using 0 as a starting point. This means that on larger distances, the ack timeout was still not high enough before synchronizing would run out of late-ack's for estimation. Fix this by using the initial estimated value as a baseline and only start averaging in the following estimation rounds. Test setup: - 2x identical devices: RB912UAG-5HPnD + 19dB sector - IBSS - 2x2 802.11an (ar9340), HT20, long GI - RSSI's -70 / -71 - Real distance: 23910 meter Results (60s iperf runs): Fixed coverage class 54 (up to 24300m): * 21.5 Mbits/sec Dynack: * 28.9 Mbits/sec Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> |
||
|---|---|---|
| .. | ||
| files | ||
| patches | ||
| scripts | ||
| ath.mk | ||
| broadcom.mk | ||
| intel.mk | ||
| Makefile | ||
| marvell.mk | ||
| ralink.mk | ||
| realtek.mk | ||