673793d753
TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4, except that the USB port has been removed and there is no longer a removable antenna option. The software is more in line with the Archer series in that it uses a nested bootloader scheme. Specifications: - QCA9563 at 775 MHz - 64 MB RAM - 16 MB flash - 3 (non-detachable) Antennas / 450 Mbit - 1x/4x WAN/LAN Gbps Ethernet (QCA8337) - reset and Wi-Fi buttons Signed-off-by: Tim Thorpe <tim@tfthorpe.net> Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
272 lines
7 KiB
C
272 lines
7 KiB
C
/*
|
|
* TP-LINK WR1043 V4 support
|
|
*
|
|
* Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
|
|
* Copyright (C) 2016 Matthias Schiffer <mschiffer@universe-factory.net>
|
|
* Copyright (C) 2016 Andreas Ziegler <github@andreas-ziegler.de>
|
|
* Copyright (C) 2016 Ludwig Thomeczek <ledesrc@wxorx.net>
|
|
* Copyright (C) 2017 Tim Thorpe <tim@tfthorpe.net>
|
|
*
|
|
* Derived from: mach-dir-869-a1.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/irq.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include <linux/platform_data/phy-at803x.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-wmac.h"
|
|
#include "dev-usb.h"
|
|
#include "machtypes.h"
|
|
#include "nvram.h"
|
|
|
|
#define TL_WR1043_V4_GPIO_BTN_RESET 2
|
|
#define TL_WR1043_V4_GPIO_BTN_RFKILL 5
|
|
|
|
#define TL_WR1043_V4_GPIO_LED_WLAN 19
|
|
#define TL_WR1043_V4_GPIO_LED_USB 7
|
|
#define TL_WR1043_V4_GPIO_LED_WPS 1
|
|
#define TL_WR1043_V4_GPIO_LED_SYSTEM 6
|
|
|
|
#define TL_WR1043_V4_GPIO_USB_POWER 8
|
|
|
|
#define TL_WR1043_V4_GPIO_LED_WAN 15
|
|
#define TL_WR1043_V4_GPIO_LED_LAN1 9
|
|
#define TL_WR1043_V4_GPIO_LED_LAN2 14
|
|
#define TL_WR1043_V4_GPIO_LED_LAN3 21
|
|
#define TL_WR1043_V4_GPIO_LED_LAN4 20
|
|
|
|
#define TL_WR1043_V4_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V4_KEYS_POLL_INTERVAL)
|
|
|
|
#define TL_WR1043_V4_MAC_LOCATION 0x1ff50008
|
|
|
|
#define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000
|
|
#define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
#define TL_WR1043N_V5_MAC_LOCATION 0x1ff00008
|
|
|
|
static struct gpio_led tl_wr1043nd_v4_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "tp-link:green:wps",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_WPS,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:system",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_SYSTEM,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:wlan",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:usb",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_USB,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:wan",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_WAN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:lan1",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_LAN1,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:lan2",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_LAN2,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:lan3",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_LAN3,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:lan4",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_LAN4,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button tl_wr1043nd_v4_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = TL_WR1043_V4_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.desc = "RFKILL button",
|
|
.type = EV_KEY,
|
|
.code = KEY_RFKILL,
|
|
.debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = TL_WR1043_V4_GPIO_BTN_RFKILL,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct ar8327_pad_cfg tl_wr1043nd_v4_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_SGMII,
|
|
.sgmii_delay_en = true,
|
|
};
|
|
|
|
static struct ar8327_platform_data tl_wr1043nd_v4_ar8327_data = {
|
|
.pad0_cfg = &tl_wr1043nd_v4_ar8327_pad0_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
};
|
|
|
|
static struct mdio_board_info tl_wr1043nd_v4_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &tl_wr1043nd_v4_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static void __init tl_wr1043nd_v4_setup(void)
|
|
{
|
|
u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043_V4_MAC_LOCATION);
|
|
u8 *eeprom = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
|
|
mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info,
|
|
ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info));
|
|
|
|
ath79_register_usb();
|
|
ath79_register_mdio(0, 0);
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_wmac(eeprom + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_v4_leds_gpio),
|
|
tl_wr1043nd_v4_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys),
|
|
tl_wr1043nd_v4_gpio_keys);
|
|
|
|
gpio_request_one(TL_WR1043_V4_GPIO_USB_POWER,
|
|
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
|
"USB power");
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V4, "TL-WR1043ND-v4",
|
|
"TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup);
|
|
|
|
static struct gpio_led tl_wr1043n_v5_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "tp-link:green:wps",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_WPS,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:system",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_SYSTEM,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:wlan",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:wan",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_WAN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:lan1",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_LAN1,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:lan2",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_LAN2,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:lan3",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_LAN3,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "tp-link:green:lan4",
|
|
.gpio = TL_WR1043_V4_GPIO_LED_LAN4,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
/* The 1043Nv5 is identical to the 1043NDv4,
|
|
* only missing the usb and small firmware layout changes */
|
|
static void __init tl_wr1043nv5_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR);
|
|
u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043N_V5_MAC_LOCATION);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043n_v5_leds_gpio),
|
|
tl_wr1043n_v5_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys),
|
|
tl_wr1043nd_v4_gpio_keys);
|
|
|
|
platform_device_register(&ath79_mdio0_device);
|
|
|
|
mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info,
|
|
ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info));
|
|
|
|
ath79_register_wmac(art + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac);
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
|
|
|
/* GMAC0 is connected to an AR8337 switch */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth0_data.speed = SPEED_1000;
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_register_eth(0);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_TL_WR1043N_V5, "TL-WR1043N-v5", "TP-LINK TL-WR1043N v5",
|
|
tl_wr1043nv5_setup);
|