openwrtv4/target/linux/lantiq/dts/ARV7518PW.dts
Mathias Kresin 91d5067091 lantiq: use the etop driver DT bindings only
Use the generic mtd-mac-address dts property to get a mac address from
flash instead of the lantiq specific one.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 02:04:31 +02:00

231 lines
4.1 KiB
Text

/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "ARV7518PW - Astoria Networks";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power_green;
failsafe = &power_red;
running = &power_green;
dsl = &dsl;
internet = &online_green;
usb = &usb;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x7d0000>;
};
boardconfig: partition@400000 {
label = "boardconfig";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x0>;
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
ath,mac-offset = <0x16>;
ath,mac-increment = <1>;
ath,pci-slot = <14>;
ath,eep-endian;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,pull = <0>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
leds {
lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
lantiq,output = <1>;
};
keys {
lantiq,pins = "io28", "io30";
lantiq,output = <0>;
lantiq,pull = <2>;
lantiq,open-drain = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 14 0>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 0>;
req-mask = <0xf>;
};
};
/*
#define SWITCH_RESET 13
*/
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 28 1>;
linux,code = <0xf7>;
};
reset {
label = "reset";
gpios = <&gpio 30 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "arv7518pw:green:power";
gpios = <&gpio 2 1>;
default-state = "keep";
};
dsl: dsl {
label = "arv7518pw:green:dsl";
gpios = <&gpio 4 1>;
};
online_green: online {
label = "arv7518pw:green:internet";
gpios = <&gpio 5 1>;
};
wifi: wifi {
label = "arv7518pw:green:wlan";
gpios = <&gpio 6 1>;
};
power_red: power2 {
label = "arv7518pw:red:power";
gpios = <&gpio 7 1>;
};
online2 {
label = "arv7518pw:red:internet";
gpios = <&gpio 8 1>;
};
usb: usb {
label = "arv7518pw:green:usb";
gpios = <&gpio 19 1>;
};
voice {
label = "arv7518pw:green:voip";
gpios = <&gpiomm 0 1>;
};
fxs1 {
label = "arv7518pw:green:phone1";
gpios = <&gpiomm 1 1>;
};
fxs2 {
label = "arv7518pw:green:phone2";
gpios = <&gpiomm 2 1>;
};
unlabeled {
label = "arv7518pw:amber:unlabeled";
gpios = <&gpiomm 3 1>;
};
wps {
label = "arv7518pw:amber:wps";
gpios = <&gpiomm 4 1>;
};
wps2 {
label = "arv7518pw:green:wps";
gpios = <&gpiomm 5 1>;
};
wps3 {
label = "arv7518pw:red:wps";
gpios = <&gpiomm 6 1>;
};
};
};