No description
575127fe1c
This patch adds factory image building for the DGN3500, all variants, and fixes sysupgrade images to make them play nice with the sercomm secondary boot loader. The factory images can be used directly in the update dialog in the interface of the stock firmware and via the special Sercomm bootmode and a special windows flashing utility (allegedly present in the CD that came with the device -- but it's also compatible with the NSLU2 Upgrade_207_XP utility.) The special bootmode can be activated by turning the device on while holding the reset button pressed, then releasing it when the power led starts blinking red and green. Please notice that if using the 207 utility, it will always report that the flashing failed even though it completed successfully. Just power cycle the router manually after the utility reports the failure and OpenWRT will boot. This same utility (despite reporting failure in this case too) can revert a DGN3500 (any variant) to the appropriate stock Netgear firmware. This patch is a heavily modified version of a package I found on the OpenWRT forum with a couple fixes and features added -- mainly the generation of all the different image variants to support all known models directly, atm known variants are AnnexA-WW, AnnexA-NA and AnnexB-DE/GR. I tested the patch successfully on my device. Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> SVN-Revision: 41236 |
||
|---|---|---|
| config | ||
| docs | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| feeds.conf.default | ||
| LICENSE | ||
| Makefile | ||
| README | ||
| rules.mk | ||
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org