openwrtv4/target/linux/ramips/dts/WN3000RPV3.dts
Alex Maclean 6031ab345d ramips: move partitions into partition table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-04 08:39:35 +02:00

149 lines
2.4 KiB
Text

/* This file is released into the public domain */
/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc";
model = "Netgear WN3000RPv3";
aliases {
led-status = &led_power_green;
};
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
led_power_green: power_g {
label = "wn3000rpv3:green:power";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
default-state = "on";
};
power_r {
label = "wn3000rpv3:red:power";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
client_g {
label = "wn3000rpv3:green:client";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
client_r {
label = "wn3000rpv3:red:client";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
router_g {
label = "wn3000rpv3:green:router";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
router_r {
label = "wn3000rpv3:red:router";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
wps {
label = "wn3000rpv3:green:wps";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
l_arrow {
label = "wn3000rpv3:blue:leftarrow";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
r_arrow {
label = "wn3000rpv3:blue:rightarrow";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&gpio1 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0x7b0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&ethernet {
mtd-mac-address = <&art 0x0>;
};
&wmac {
mtd-mac-address = <&art 0x6>;
ralink,mtd-eeprom = <&art 0x1000>;
};
&pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "uartf", "spi refclk";
ralink,function = "gpio";
};
};
};