openwrtv4/target/linux/ar71xx/base-files/etc/board.d/02_network
Piotr Dymacz 56561b9f51 ar71xx: add support for TP-Link TL-WA850RE v2
TP-Link TL-WA850RE v2 is a wall-plug N300 Wi-Fi range extender,
based on Qualcomm/Atheros QCA9533 v2.

Short specification:

- 550/391/195 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 32 MB of RAM (DDR1)
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 2x internal antennas (embedded on PCB)
- 9x LED (all can be turned off with GPIO15), 2x button
- UART (J3) header on PCB

Flash instruction: use "factory" image directly in vendor GUI.

Warning: this device does not include any kind of recovery mechanism
in the bootloader and disassembling process is not trivial.

You can access vendor firmware over serial line using:
- login: root
- password: sohoadmin

Image was tested only in US version of the device, but should work
also with the same device version sold in other countries.

Available FLASH space, with LEDE trunk, is only 240 KB.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-14 12:25:33 +01:00

512 lines
10 KiB
Bash
Executable file

#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
#
. /lib/functions/system.sh
. /lib/functions/uci-defaults.sh
. /lib/ar71xx.sh
ar71xx_setup_interfaces()
{
local board="$1"
case "$board" in
airgatewaypro)
ucidef_add_switch "switch0" \
"0@eth0" "4:lan" "5:wan"
;;
airrouter|\
ap121|\
ap121-mini|\
ap96|\
dir-600-a1|\
dir-615-c1|\
dir-615-e1|\
dir-615-e4|\
hiwifi-hc6361|\
ja76pf|\
mc-mac1200r|\
minibox-v1|\
mynet-n600|\
oolite|\
qihoo-c301|\
rb-750|\
rb-751|\
som9331|\
tew-632brp|\
tew-712br|\
tew-732br|\
tl-mr3220|\
tl-mr3220-v2|\
tl-mr3420|\
tl-wdr3320-v2|\
tl-wdr3500|\
tl-wr741nd|\
tl-wr741nd-v4|\
tl-wr841n-v11|\
tl-wr841n-v9|\
tl-wr842n-v3|\
whr-g301n|\
whr-hp-g300n|\
whr-hp-gn|\
wzr-hp-ag300h|\
zbt-we1526)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
alfa-ap120c|\
all0305|\
antminer-s1|\
antminer-s3|\
antrouter-r1|\
aw-nr580|\
bullet-m|\
c-55|\
cap4200ag|\
cf-e380ac-v1|\
cf-e380ac-v2|\
eap120|\
eap300v2|\
eap7660d|\
el-mini|\
loco-m-xw|\
mr12|\
mr16|\
mr1750|\
mr1750v2|\
mr18|\
mr600|\
mr600v2|\
mr900|\
mr900v2|\
mynet-rext|\
pqi-air-pen|\
rb-411|\
rb-411u|\
rb-911g-2hpnd|\
rb-911g-5hpacd|\
rb-911g-5hpnd|\
rb-912uag-2hpnd|\
rb-912uag-5hpnd|\
rb-sxt2n|\
rb-sxt5n|\
re450|\
rocket-m-xw|\
sc300m |\
tl-mr10u|\
tl-mr11u|\
tl-mr12u|\
tl-mr13u|\
tl-mr3020|\
tl-mr3040|\
tl-mr3040-v2|\
tl-wa701nd-v2|\
tl-wa7210n-v2|\
tl-wa750re|\
tl-wa801nd-v2|\
tl-wa830re-v2|\
tl-wa850re|\
tl-wa850re-v2|\
tl-wa901nd|\
tl-wa901nd-v2|\
tl-wa901nd-v3|\
tl-wa901nd-v4|\
tl-wr703n|\
tl-wr802n-v1|\
tube2h|\
unifiac-lite|\
wndap360|\
wp543)
ucidef_set_interface_lan "eth0"
;;
a40|\
a60|\
alfa-ap96|\
alfa-nx|\
gl-ar150|\
gl-ar300m|\
gl-domino|\
gl-inet|\
gl-mifi|\
jwap003|\
om2pv4|\
om2p-hsv4|\
pb42|\
pb44|\
rb-951ui-2hnd|\
routerstation|\
tl-wr710n|\
tl-wr720n-v3|\
tl-wr810n|\
wpe72|\
wrtnode2q)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
all0258n|\
all0315n|\
dlan-hotspot|\
dlan-pro-500-wp|\
dr344|\
ja76pf2|\
rocket-m-ti|\
ubnt-unifi-outdoor)
ucidef_set_interface_lan "eth0 eth1"
;;
wzr-hp-g300nh2)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan"
;;
ap132|\
ap136|\
ap152|\
rb-750gl|\
rb-751g|\
rb-951g-2hnd|\
wlr8100|\
wzr-hp-g450h)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
ap135-020|\
ap136-020|\
bhr-4grv2|\
tew-823dru|\
tl-wr1043nd-v2|\
wzr-450hp2)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
;;
ap136-010|\
ap147-010|\
nbg6616|\
nbg6716)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
;;
ap143|\
rb-433|\
rb-433u)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "5@eth1"
;;
archer-c5|\
archer-c7|\
tl-wdr4900-v2)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
archer-c59-v1|\
archer-c60-v1)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
;;
arduino-yun|\
dir-505-a1|\
tl-wa801nd-v3)
ucidef_set_interface_lan "eth1"
;;
bsb)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "3:lan"
;;
c-60)
ucidef_add_switch "switch0" \
"0@eth0" "3:wan" "4:lan"
;;
cap324)
ucidef_set_interface_lan "eth0" "dhcp"
;;
cpe210|\
cpe510|\
wbs210|\
wbs510)
ucidef_add_switch "switch0" \
"0@eth0" "5:lan" "4:wan"
;;
cr3000)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;
cr5000|\
dgl-5500-a1|\
dhp-1565-a1|\
dir-825-c1|\
dir-835-a1|\
esr900|\
mynet-n750|\
sr3200|\
wndr3700v4|\
wndr4300)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
dap-2695-a1)
ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1"
;;
rb-941-2nd)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:wan:1"
;;
db120|\
rb-2011l|\
rb-2011uas|\
rb-2011uas-2hnd|\
rb-2011uias|\
rb-2011uias-2hnd)
case "$board" in
rb-2011uas*|\
rb-2011uias|\
rb-2011uias-2hnd)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" "6:sfp"
;;
*)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
esac
ucidef_add_switch "switch1" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan"
;;
dir-615-i1|\
omy-g1|\
r6100|\
smart-300|\
tl-mr3420-v2|\
tl-wdr6500-v2|\
tl-wr841n-v8|\
tl-wr940n-v4|\
tl-wr941nd-v5|\
tl-wr941nd-v6|\
wnr1000-v2|\
wnr2000-v4|\
wnr2200|\
wnr612-v2|\
wpn824n)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth1"
;;
dir-825-b1|\
nbg460n_550n_550nh|\
tew-673gru|\
wzr-hp-g300nh)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
;;
dlan-pro-1200-ac)
ucidef_set_interface_lan "eth0"
ucidef_add_switch "switch0" \
"0u@eth0" "2:lan" "3:lan" "4:lan"
ucidef_add_switch_attr "switch0" "enable" "false"
;;
el-m150)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "3@eth1"
;;
dir-869-a1|\
epg5000|\
esr1750|\
tl-wr1043nd-v4)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
ew-dorin)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:wan"
;;
ew-dorin-router)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan"
;;
dw33d|\
f9k1115v2)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
ucidef_add_switch "switch0" \
"2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "0@eth0" "1:wan"
;;
gl-ar300|\
wnr2000-v3)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;;
jwap230)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "5:wan" "6@eth1"
;;
nanostation-m-xw)
ucidef_add_switch "switch0" \
"0@eth0" "5:lan" "1:wan"
;;
onion-omega)
ucidef_set_interface_lan "wlan0"
;;
rb-435g)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan"
;;
rb-450)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth1"
;;
rb-450g)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;
routerstation-pro)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
;;
rb-493g)
ucidef_set_interfaces_lan_wan "eth0.1 eth1.1" "eth1.2"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
ucidef_add_switch "switch1" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
tellstick-znet-lite)
ucidef_set_interface_wan "eth0"
ucidef_set_interface_raw "wlan" "wlan0" "dhcp"
;;
tl-wdr4300|\
tl-wr1041n-v2)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
;;
tl-wpa8630)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
;;
tl-wr1043nd)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
;;
tl-wr2543n)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
;;
tl-wr841n-v1|\
tl-wr941nd)
ucidef_set_interface_raw "eth" "eth0"
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
tl-wr841n-v7)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
;;
tl-wr842n-v2)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
;;
uap-pro|\
wpj342)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:wan"
;;
unifiac-pro|\
xd3200)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:wan"
;;
wndr3700|\
wndr3700v2|\
wndr3800|\
wndr3800ch)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0"
ucidef_add_switch_attr "switch0" "blinkrate" 2
ucidef_add_switch_port_attr "switch0" 1 led 6
ucidef_add_switch_port_attr "switch0" 2 led 9
ucidef_add_switch_port_attr "switch0" 5 led 2
;;
wpj344)
ucidef_add_switch "switch0" \
"0@eth0" "3:lan" "2:wan"
;;
wpj558)
ucidef_add_switch "switch0" \
"5:lan" "1:wan" "6@eth0"
;;
wrt160nl)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth0"
;;
wzr-hp-g450h)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan"
;;
z1)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:wan"
;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
esac
}
ar71xx_setup_macs()
{
local board="$1"
local lan_mac=""
local wan_mac=""
case $board in
dgl-5500-a1|\
dir-825-c1)
wan_mac=$(mtd_get_mac_ascii nvram "wan_mac")
;;
dhp-1565-a1|\
dir-835-a1|\
wndr3700v4|\
wndr4300)
lan_mac=$(mtd_get_mac_binary caldata 0)
wan_mac=$(mtd_get_mac_binary caldata 6)
;;
tl-wr1043nd-v4)
wan_mac=$(mtd_get_mac_binary config 0x1017c)
;;
esr900)
wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
;;
dir-869-a1|\
mynet-n750)
wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
}
board_config_update
board=$(ar71xx_board_name)
ar71xx_setup_interfaces $board
ar71xx_setup_macs $board
board_config_flush
exit 0