openwrtv4/target/linux/ramips
Ludwig Thomeczek 5543d63fc8 ramips: add support for Netgear R6120
This patch adds support for the Netgear R6120, aka Netgear AC1200.

Specification:
- SoC: MediaTek MT7628 (580 MHz)
- Flash: 16 MiB
- RAM: 64 MiB
- Wireless: 2.4Ghz(builtin) and 5Ghz (MT7612E)
- LAN speed: 10/100
- LAN ports: 4
- WAN speed: 10/100
- WAN ports: 1
- Serial baud rate of Bootloader and factory firmware: 57600

To flash use nmrpflash with the provided factory.img.
Flashing via webinterface will not work, for now.

Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
2018-08-13 08:37:19 +02:00
..
base-files ramips: add support for Netgear R6120 2018-08-13 08:37:19 +02:00
dts ramips: add support for Netgear R6120 2018-08-13 08:37:19 +02:00
files-4.14/drivers mt7620: gsw: make IntPHY and ExtPHY share mdio addr 4 possible 2018-08-06 07:12:31 +02:00
image ramips: add support for Netgear R6120 2018-08-13 08:37:19 +02:00
mt76x8 kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
mt7620 kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
mt7621 ramips: Add support for Mikrotik RouterBOARD RBM33g 2018-06-21 06:54:42 +02:00
patches-4.14 ramips: use ralink,nr-gpio instead of ralink,num-gpios 2018-08-04 08:39:35 +02:00
rt288x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
rt305x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
rt3883 kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
Makefile ramips: switch to linux 4.14 2018-04-06 18:07:43 +02:00
modules.mk ramips: rename pwm kernel module 2018-04-08 12:35:33 +02:00