openwrtv4/target/linux/ramips/base-files/etc/uci-defaults/network
Gabor Juhos 54d8a55eed ramips: make built-in switch transparent for ALL0256N and ALL5002
This allows them to transparently communicate with an external VLAN switch.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33305
2012-08-29 10:37:47 +00:00

216 lines
4.2 KiB
Bash
Executable file

#!/bin/sh
. /etc/functions.sh
. /lib/ramips.sh
. /lib/functions/uci-defaults.sh
if [ ! -x /usr/sbin/maccalc ]; then
echo "$0: maccalc not found!"
return
fi
ramips_setup_rt3x5x_vlans()
{
if [ ! -x /sbin/swconfig ]; then
# legacy default
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
return
fi
local wanports=""
local lanports=""
for port in 5 4 3 2 1 0; do
if [ `swconfig dev rt305x port $port get disable` = "1" ]; then
continue
fi
if [ `swconfig dev rt305x port $port get lan` = "0" ]; then
wanports="$port $wanports"
else
lanports="$port $lanports"
fi
done
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rt305x" "1" "1"
ucidef_add_switch_vlan "rt305x" "1" "$lanports 6t"
ucidef_add_switch_vlan "rt305x" "2" "$wanports 6t"
}
ramips_setup_interfaces()
{
local board="$1"
ucidef_set_interface_loopback
case $board in
all0256n | \
all5002)
ucidef_set_interface_lan "eth0"
;;
dir-615-h1 | \
wl-330n)
ucidef_set_interface_lan "eth0.1"
;;
3g-6200n | \
argus-atp52b | \
b2c | \
nw718 | \
psr-680w | \
sl-r7205 | \
w502u | \
wr6202)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
f5d8235-v1 | \
f5d8235-v2 | \
ur-336un)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
v11st-fe)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
ucidef_add_switch_vlan "switch0" "2" "0 5t"
;;
rt-n15 | \
wl-351)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
ucidef_add_switch_vlan "switch0" "2" "4 5t"
;;
rt-n56u)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
ucidef_add_switch_vlan "switch0" "2" "4 8t"
;;
freestation5 | \
wcr-150gn)
ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
;;
wli-tx4-ag300n)
ucidef_set_interface_lan "eth0"
;;
*)
RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
if [ -n "${RT3X5X}" ]; then
ramips_setup_rt3x5x_vlans
else
ucidef_set_interfaces_lan_wan "eth0" "eth1"
fi
;;
esac
}
ramips_setup_macs()
{
local board="$1"
local lan_mac=""
local wan_mac=""
case $board in
all0256n | \
all5002 | \
dir-615-h1)
lan_mac=$(ramips_get_mac_binary factory 40)
;;
3g-6200n | \
argus-atp52b | \
bc2 | \
f5d8235-v1 | \
nw718 | \
psr-680w | \
rt-n15 | \
sl-r7205 | \
wl-351)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
w306r-v20)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 5)
;;
fonera20n)
lan_mac=$(ramips_get_mac_binary factory 40)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
dir-300-b1 |\
dir-300-b2 |\
dir-600-b1)
lan_mac=$(ramips_get_mac_binary devdata 16388)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
dir-620-a1)
lan_mac=$(ramips_get_mac_binary factory 4)
lan_mac=$(maccalc or "$lan_mac" "02:00:00:00:00:00")
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
esr-9753 | \
ur-336un)
lan_mac=$(ramips_get_mac_binary devdata 16388)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
nbg-419n | \
wcr-150gn)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(ramips_get_mac_binary factory 40)
;;
f5d8235-v2)
lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
rt-n56u)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(ramips_get_mac_binary factory 32772)
;;
all0239-3g | \
carambola | \
w502u)
lan_mac=$(ramips_get_mac_binary factory 40)
wan_mac=$(ramips_get_mac_binary factory 46)
;;
wl341v3)
lan_mac=$(ramips_get_mac_binary board-nvram 65440)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
wli-tx4-ag300n)
lan_mac=$(ramips_get_mac_binary factory 4)
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
}
[ -e /etc/config/network ] && exit 0
touch /etc/config/network
board=$(ramips_board_name)
ramips_setup_interfaces $board
ramips_setup_macs $board
uci commit network
exit 0