Shuanglin Liu 53ef20f65a ar71xx: add support for Rockeetech AP531B0 ... Specification: - SoC: Qualcomm Atheros QCA9531 (650/400/216 MHz (CPU/DDR/AHB)) - RAM: 64 MiB DDR2 - Storage: 16 MiB of flash (optional 16 MiB second flash) - Wireless: built into QCA9531 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) 1x100M (port 4) - PCI-E: x1 - SIMcard slot: x1 - USB 2.0 port: x1 (optional) - Ext GPIO pin: x8 - UART for serial console: x1 - External watchdog: x1 (optional) - Power supply: 9-48V (DC jack/passive PoE) Installation through tftp: - Copy <Firmware Image Name> into tftp directory - Connect board via ttl port and Ethernet port - Boot the AP531B0 - When "Autobooting in 1 seconds" appears press Enter - Set serverip and ipaddr appropriate (e.g. setenv serverip 192.168.88.10;setenv ipaddr 192.168.88.1) - Enter "tftp 0x8050000 <Firmware Image Name>" - Enter "erase 0x9f050000 +$filesize" - Enter "cp.b 0x80500000 0x9f050000 $filesize" - Enter "reset" Signed-off-by: Shuanglin Liu <roboidler@gmail.com>		2017-03-12 17:38:31 +01:00
..
base-files	ar71xx: add support for Rockeetech AP531B0	2017-03-12 17:38:31 +01:00
files	ar71xx: add support for Rockeetech AP531B0	2017-03-12 17:38:31 +01:00
generic	switch to the new usbport LED trigger	2016-10-19 12:09:45 +02:00
image	ar71xx: add support for Rockeetech AP531B0	2017-03-12 17:38:31 +01:00
mikrotik	ar71xx: add support for Rockeetech AP531B0	2017-03-12 17:38:31 +01:00
nand	ar71xx: add support for Rockeetech AP531B0	2017-03-12 17:38:31 +01:00
patches-4.4	kernel: update kernel 4.4 to 4.4.53	2017-03-12 15:46:02 +01:00
config-4.4	ar71xx: add support for Rockeetech AP531B0	2017-03-12 17:38:31 +01:00
Makefile	build: remove mips16 feature flag from target makefiles	2017-01-24 13:15:01 +01:00
modules.mk	ar71xx: add LED driver NU801	2015-12-11 15:04:57 +00:00