openwrtv4/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
John Crispin 53c474abbd ath79: add new OF only target for QCA MIPS silicon
This target aims to replace ar71xx mid-term. The big part that is still
missing is making the MMIO/AHB wifi work using OF. NAND and mikrotik
subtargets will follow.

Signed-off-by: John Crispin <john@phrozen.org>
2018-05-07 08:06:51 +02:00

127 lines
1.9 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242.dtsi"
/ {
compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
model = "Buffalo WZR-HP-G450H";
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
button@0 {
label = "usb";
linux,code = <BTN_2>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
button@1 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
button@2 {
label = "movie_engine";
linux,code = <KEY_RESTART>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
button@3 {
label = "aoss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
button@4 {
label = "router_off";
linux,code = <BTN_5>;
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led@0 {
label = "buffalo:orange:security";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led@1 {
label = "buffalo:red:diag";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_usb_power {
gpio-export,name = "wzr-hp-g450h:usb-power";
gpio-export,output = <1>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
};
};
&mdio0 {
status = "okay";
phy-mask = <0x1>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
pll-data = <0x62000000 0 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&uart {
status = "okay";
};
&usb_phy {
status = "okay";
};
&usb {
status = "okay";
};
&pcie {
status = "okay";
ath9k@0000 {
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};