openwrtv4/target/linux/lantiq/dts/TDW89X0.dtsi
blogic b7fc892eb5 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-10 10:43:12 +02:00

249 lines
4.5 KiB
Text

/include/ "vr9.dtsi"
/ {
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
/* the power led can't be controlled, use the wps led instead */
boot = &wps;
failsafe = &wps;
dsl = &dsl;
internet = &internet;
usb = &usb0;
usb2 = &usb2;
};
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
gphy-leds {
lantiq,groups = "gphy0 led1", "gphy1 led1";
lantiq,function = "gphy";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
phy-rst {
lantiq,pins = "io42";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 0>;
lantiq,portmask = <0x3>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 33 0>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy11g_a2x.bin";
phys = [ 00 01 ];
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x21000>;
ath,mac-offset = <0xf100>;
ath,mac-increment;
ath,led-pin = <0>;
ath,disable-5ghz;
ath,led-active-high;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 0 1>;
linux,code = <0x198>;
};
wifi {
label = "wifi";
gpios = <&gpio 9 0>;
linux,code = <0xf7>;
linux,input-type = <5>; /* EV_SW */
};
wps {
label = "wps";
gpios = <&gpio 39 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
/*
power is not controllable via gpio
*/
dsl: dsl {
label = "tdw89x0:green:dsl";
gpios = <&gpio 4 0>;
};
internet: internet {
label = "tdw89x0:green:internet";
gpios = <&gpio 5 0>;
};
usb0: usb0 {
label = "tdw89x0:green:usb";
gpios = <&gpio 19 0>;
};
usb2: usb2 {
label = "tdw89x0:green:usb2";
gpios = <&gpio 20 0>;
};
wps: wps {
label = "tdw89x0:green:wps";
gpios = <&gpio 37 0>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
status = "ok";
m25p80@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <33250000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
partition@20000 {
reg = <0x20000 0x7a0000>;
label = "firmware";
};
partition@7c0000 {
reg = <0x7c0000 0x10000>;
label = "config";
read-only;
};
ath9k_cal: partition@7d0000 {
reg = <0x7d0000 0x30000>;
label = "boardconfig";
read-only;
};
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&ath9k_cal 0xf100>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
// gpios = <&gpio 42 1>;
};
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};