No description
Find a file
2011-07-03 15:01:56 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include generic: use padjffs2 in prepare_generic_squashfs 2011-07-02 08:37:58 +00:00
package swconfig: make reset and enable_vlan default to 1 (based on patch by Nikolay Martynov) 2011-07-03 04:20:18 +00:00
scripts download.pl: cope with potential two-digit linux versions 2011-07-03 15:00:24 +00:00
target ramips: add all supported boards to lib/ramips.sh 2011-07-03 15:01:56 +00:00
toolchain eglibc: remove old versions 2011-07-02 09:47:00 +00:00
tools tools: always build mpc, now that older gcc versions have been eliminated, fixes #9642 2011-07-02 10:49:15 +00:00
.gitignore add vim temp files (*~) to .gitignore 2011-04-29 15:11:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add a kernel config option for magic sysrq 2011-03-17 23:14:12 +00:00
feeds.conf.default switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk rules.mk: properly populate $(LIBGCC_S) for external toolchains 2011-04-11 16:06:46 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org