179 lines
5.5 KiB
C
179 lines
5.5 KiB
C
#ifndef __MTK_PHY_NEW_H
|
|
#define __MTK_PHY_NEW_H
|
|
|
|
//#define CONFIG_U3D_HAL_SUPPORT
|
|
|
|
/* include system library */
|
|
#include <linux/gfp.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
|
|
/* Choose PHY R/W implementation */
|
|
//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO
|
|
#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC
|
|
|
|
/* Choose PHY version */
|
|
//Select your project by defining one of the followings
|
|
#define CONFIG_PROJECT_7621 //7621
|
|
#define CONFIG_PROJECT_PHY
|
|
|
|
/* BASE ADDRESS DEFINE, should define this on ASIC */
|
|
#define PHY_BASE 0xBE1D0000
|
|
#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100)
|
|
#define SIFSLV_CHIP_BASE (PHY_BASE+0x700)
|
|
#define U2_PHY_BASE (PHY_BASE+0x800)
|
|
#define U3_PHYD_BASE (PHY_BASE+0x900)
|
|
#define U3_PHYD_B2_BASE (PHY_BASE+0xa00)
|
|
#define U3_PHYA_BASE (PHY_BASE+0xb00)
|
|
#define U3_PHYA_DA_BASE (PHY_BASE+0xc00)
|
|
|
|
#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
|
|
#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100)
|
|
#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700)
|
|
#define U2_PHY_BASE_P1 (PHY_BASE+0x1000)
|
|
#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100)
|
|
#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200)
|
|
#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300)
|
|
#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400)
|
|
#endif
|
|
|
|
/*
|
|
|
|
0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg
|
|
0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc
|
|
0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28
|
|
0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28
|
|
0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28
|
|
0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28
|
|
0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28
|
|
*/
|
|
|
|
|
|
/* TYPE DEFINE */
|
|
typedef unsigned int PHY_UINT32;
|
|
typedef int PHY_INT32;
|
|
typedef unsigned short PHY_UINT16;
|
|
typedef short PHY_INT16;
|
|
typedef unsigned char PHY_UINT8;
|
|
typedef char PHY_INT8;
|
|
|
|
typedef PHY_UINT32 __bitwise PHY_LE32;
|
|
|
|
/* CONSTANT DEFINE */
|
|
#define PHY_FALSE 0
|
|
#define PHY_TRUE 1
|
|
|
|
/* MACRO DEFINE */
|
|
#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data))
|
|
#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr))
|
|
|
|
#define DRV_MDELAY mdelay
|
|
#define DRV_MSLEEP msleep
|
|
#define DRV_UDELAY udelay
|
|
#define DRV_USLEEP usleep
|
|
|
|
/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */
|
|
PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data);
|
|
PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr);
|
|
PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data);
|
|
PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr);
|
|
|
|
/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */
|
|
PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
|
|
PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
|
|
PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
|
|
PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
|
|
|
|
struct u3phy_info {
|
|
PHY_INT32 phy_version;
|
|
PHY_INT32 phyd_version_addr;
|
|
|
|
#ifdef CONFIG_PROJECT_PHY
|
|
struct u2phy_reg *u2phy_regs;
|
|
struct u3phya_reg *u3phya_regs;
|
|
struct u3phya_da_reg *u3phya_da_regs;
|
|
struct u3phyd_reg *u3phyd_regs;
|
|
struct u3phyd_bank2_reg *u3phyd_bank2_regs;
|
|
struct sifslv_chip_reg *sifslv_chip_regs;
|
|
struct sifslv_fm_feg *sifslv_fm_regs;
|
|
#endif
|
|
};
|
|
|
|
struct u3phy_operator {
|
|
PHY_INT32 (*init) (struct u3phy_info *info);
|
|
PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
|
|
PHY_INT32 (*eyescan_init) (struct u3phy_info *info);
|
|
PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
|
|
PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info);
|
|
PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info);
|
|
PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info);
|
|
};
|
|
|
|
#ifdef U3_PHY_LIB
|
|
#define AUTOEXT
|
|
#else
|
|
#define AUTOEXT extern
|
|
#endif
|
|
|
|
AUTOEXT struct u3phy_info *u3phy;
|
|
AUTOEXT struct u3phy_info *u3phy_p1;
|
|
AUTOEXT struct u3phy_operator *u3phy_ops;
|
|
|
|
/*********eye scan required*********/
|
|
|
|
#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF))
|
|
#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8))
|
|
|
|
typedef enum
|
|
{
|
|
SCAN_UP,
|
|
SCAN_DN
|
|
} enumScanDir;
|
|
|
|
struct strucScanRegion
|
|
{
|
|
PHY_INT8 bX_tl;
|
|
PHY_INT8 bY_tl;
|
|
PHY_INT8 bX_br;
|
|
PHY_INT8 bY_br;
|
|
PHY_INT8 bDeltaX;
|
|
PHY_INT8 bDeltaY;
|
|
};
|
|
|
|
struct strucTestCycle
|
|
{
|
|
PHY_UINT16 wEyeCnt;
|
|
PHY_INT8 bNumOfEyeCnt;
|
|
PHY_INT8 bPICalEn;
|
|
PHY_INT8 bNumOfIgnoreCnt;
|
|
};
|
|
|
|
#define ERRCNT_MAX 128
|
|
#define CYCLE_COUNT_MAX 15
|
|
|
|
/// the map resolution is 128 x 128 pts
|
|
#define MAX_X 127
|
|
#define MAX_Y 127
|
|
#define MIN_X 0
|
|
#define MIN_Y 0
|
|
|
|
PHY_INT32 u3phy_init(void);
|
|
|
|
AUTOEXT struct strucScanRegion _rEye1;
|
|
AUTOEXT struct strucScanRegion _rEye2;
|
|
AUTOEXT struct strucTestCycle _rTestCycle;
|
|
AUTOEXT PHY_UINT8 _bXcurr;
|
|
AUTOEXT PHY_UINT8 _bYcurr;
|
|
AUTOEXT enumScanDir _eScanDir;
|
|
AUTOEXT PHY_INT8 _fgXChged;
|
|
AUTOEXT PHY_INT8 _bPIResult;
|
|
/* use local variable instead to save memory use */
|
|
#if 0
|
|
AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
|
|
AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
|
|
#endif
|
|
|
|
/***********************************/
|
|
#endif
|
|
|