openwrtv4/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN1000B.dts
Hauke Mehrtens 6eaf8b3d89 lantiq: kernel 4.14: update dts files
Updated the devicetree source files to make use of the following
upstreamed drivers:

 - xrx200 ethernet phy
 - reset controller unit
 - dwc2
 - fpi

Use our custom xrx200 ethernet phy compatible to support boards, which
have switched the vr9 revision during lifetime, with a single devicetree
source file.

By switching to the dwc2 driver + usb phy framework, we don't need to used
our custom gpio power patch and can use a fixed regulator instead.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-02-20 19:25:17 +01:00

173 lines
2.9 KiB
Text

/dts-v1/;
#include "amazonse.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase";
model = "Netgear DGN1000B";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-dsl = &dsl;
led-internet = &online_green;
};
memory@0 {
reg = <0x0 0x1000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl: dsl {
label = "dgn1000b:green:dsl";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "on";
};
online_green: online {
label = "dgn1000b:green:online";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
online2 {
label = "dgn1000b:red:online";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wps {
label = "dgn1000b:green:wps";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "on";
};
power: power {
label = "dgn1000b:green:power";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
/*
power red is missing
*/
};
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
asc {
lantiq,groups = "asc";
lantiq,function = "asc";
};
keys_in {
lantiq,pins = "io0",/* "io25", */"io29";
lantiq,pull = <2>;
lantiq,open-drain = <1>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs1";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
&gsw {
phy-mode = "mii";
mac-address = [ 00 11 22 33 44 55 ];
};
&spi {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
m25p80@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <1 0>;
spi-max-frequency = <5000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x20000>;
label = "SPI (RO) U-Boot Image";
read-only;
};
partition@20000 {
reg = <0x20000 0x10000>;
label = "ENV_MAC";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "DPF";
read-only;
};
partition@40000 {
reg = <0x40000 0x10000>;
label = "NVRAM";
read-only;
};
partition@500000 {
reg = <0x50000 0x003a0000>;
label = "kernel";
};
};
};
};
&usb_phy {
status = "okay";
};
&usb {
status = "okay";
};