openwrtv4/target/linux/ramips/dts/TEW-691GR.dts
Mathias Kresin 2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00

114 lines
1.7 KiB
Text

/dts-v1/;
#include "rt3883.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "TEW-691GR", "ralink,rt3883-soc";
model = "TRENDnet TEW-691GR";
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x0030000>;
label = "u-boot";
read-only;
};
partition@30000 {
reg = <0x00030000 0x00010000>;
label = "u-boot-env";
read-only;
};
factory: partition@40000 {
reg = <0x00040000 0x00010000>;
label = "factory";
read-only;
};
partition@50000 {
reg = <0x00050000 0x007b0000>;
label = "firmware";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio1 2 1>;
linux,code = <KEY_WPS_BUTTON>;
};
rfkill {
label = "rfkill";
gpios = <&gpio0 0 1>;
linux,code = <KEY_RFKILL>;
};
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "tew-691gr:green:wps";
gpios = <&gpio0 9 1>;
};
};
};
&gpio1 {
status = "okay";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
port@0 {
phy-handle = <&phy0>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
};
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0x0>;
ralink,5ghz = <0>;
mtd-mac-address = <&factory 0x4>;
mtd-mac-address-increment = <1>;
};