4b93cbd172
Add ath79 arch support for PowerCloud Systems CR5000. Previously supported under ar71xx (however there are some errors in that support; to be fixed shortly). Info: * This board is based on the Atheros DB120 reference design, but doesn't use the on-board switch. Instead it attachs GMAC0 to an AR8327 switch. * It only uses GMAC0 and the WAN is simply a VLAN in the stock firmware. * It has 64MB RAM and 8MB flash. * In the dts version we get rid of using 'open-drain' for the AR8327 LED controls. * As with the platform data version we disable JTAG as this conflicts with one of the pair of GPIO's required for the power/status LED (GPIO2 and GPIO4 are used for this LED). * The pcie card wifi has an EEPROM but gets it's MAC address from the ART partition. * The SoC wifi (2.4 GHz) is all from the ART. * The USB is support comes from the SoC. NB. This is actually an AR9342 rather than AR9344 but we use the 9344 definitions because there are no relevant differences for this board. NB: Building only images that don't support reverting to the old cloud-based firmware as the Skydog cloud service for the CR5000 no longer exists. Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
118 lines
3.9 KiB
Makefile
118 lines
3.9 KiB
Makefile
include ./common-netgear.mk
|
|
|
|
define Device/avm_fritz300e
|
|
ATH_SOC := ar7242
|
|
DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
|
|
KERNEL := kernel-bin | append-dtb | lzma | eva-image
|
|
KERNEL_INITRAMFS := $$(KERNEL)
|
|
IMAGE_SIZE := 15232k
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
|
|
append-squashfs-fakeroot-be | pad-to 256 | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
DEVICE_PACKAGES := fritz-tffs rssileds -swconfig
|
|
endef
|
|
TARGET_DEVICES += avm_fritz300e
|
|
|
|
define Device/embeddedwireless_dorin
|
|
ATH_SOC := ar9331
|
|
DEVICE_TITLE := Embedded Wireless Dorin
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += ew-dorin
|
|
endef
|
|
TARGET_DEVICES += embeddedwireless_dorin
|
|
|
|
define Device/etactica-eg200
|
|
ATH_SOC := ar9331
|
|
DEVICE_TITLE := eTactica EG200
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \
|
|
kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
|
|
SUPPORTED_DEVICES += etactica,eg200 rme-eg200
|
|
endef
|
|
TARGET_DEVICES += etactica-eg200
|
|
|
|
define Device/glinet_ar150
|
|
ATH_SOC := ar9330
|
|
DEVICE_TITLE := GL.iNet GL-AR150
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-ar150
|
|
endef
|
|
TARGET_DEVICES += glinet_ar150
|
|
|
|
define Device/glinet_ar300m_nor
|
|
ATH_SOC := qca9533
|
|
DEVICE_TITLE := GL.iNet GL-AR300M
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-ar300m
|
|
endef
|
|
TARGET_DEVICES += glinet_ar300m_nor
|
|
|
|
define Device/ocedo_raccoon
|
|
ATH_SOC := ar9344
|
|
DEVICE_TITLE := OCEDO Raccoon
|
|
IMAGE_SIZE := 7424k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += ocedo_raccoon
|
|
|
|
define Device/openmesh_om5p-ac-v2
|
|
ATH_SOC := qca9558
|
|
DEVICE_TITLE := OpenMesh OM5P-AC v2
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x om-watchdog
|
|
IMAGE_SIZE := 7808k
|
|
SUPPORTED_DEVICES += om5p-acv2
|
|
endef
|
|
TARGET_DEVICES += openmesh_om5p-ac-v2
|
|
|
|
define Device/pcs_cr5000
|
|
ATH_SOC := ar9344
|
|
DEVICE_TITLE := PowerCloud Systems CR5000
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
|
|
IMAGE_SIZE := 7808k
|
|
IMAGES := sysupgrade.bin
|
|
SUPPORTED_DEVICES += cr5000
|
|
endef
|
|
TARGET_DEVICES += pcs_cr5000
|
|
|
|
define Device/netgear_wndr3800
|
|
ATH_SOC := ar7161
|
|
DEVICE_TITLE := NETGEAR WNDR3800
|
|
NETGEAR_KERNEL_MAGIC := 0x33373031
|
|
KERNEL := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
|
|
NETGEAR_BOARD_ID := WNDR3800
|
|
NETGEAR_HW_ID := 29763654+16+128
|
|
IMAGE_SIZE := 15872k
|
|
IMAGES := sysupgrade.bin factory.img
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset
|
|
SUPPORTED_DEVICES += wndr3800
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3800
|
|
|
|
define Device/buffalo_wzr-hp-g450h
|
|
ATH_SOC := ar7242
|
|
DEVICE_TITLE := Buffalo WZR-HP-G450H
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
IMAGE_SIZE := 32256k
|
|
SUPPORTED_DEVICES += wzr-hp-g450h
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-hp-g450h
|
|
|
|
define Device/phicomm-k2t
|
|
ATH_SOC := qca9563
|
|
DEVICE_TITLE := Phicomm K2T
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
|
|
IMAGE_SIZE := 15744k
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/default := append-kernel | append-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
DEVICE_PACKAGES := kmod-leds-reset kmod-ath10k ath10k-firmware-qca9888
|
|
SUPPORTED_DEVICES += phicomm,k2t
|
|
endef
|
|
TARGET_DEVICES += phicomm-k2t
|