KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ar71xx/image/generic-tp-link.mk
Adrian Schmutzler 5c5bf8b865
ar71xx: Add support for TP-Link CPE210 v2 
This PR adds support for a popular low-cost 2.4GHz N based AP

Specifications:
 - SoC: Qualcomm Atheros QCA9533 (650MHz)
 - RAM: 64MB
 - Storage: 8 MB SPI NOR
 - Wireless: 2.4GHz N based built into SoC 2x2
 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Notes:
TP-Link does not use bootstrap registers so without this patch reference
clock detects as 40MHz while it is actually 25MHz.
This is due to messed up bootstrap resistor configuration on the PCB.
Provided GPL code just forces 25MHz reference clock.
That causes booting with completely wrong clocks, for example, CPU tries
to boot at 1040MHz while the stock is 650MHz.
So this PR depends on PR #672 to remove 40MHz reference clock.
Thanks to Sven Eckelmann <sven@narfation.org> for properly patching that.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2018-06-23 16:06:31 +02:00

531 lines
17 KiB
Makefile
Raw Blame History

include ./common-tp-link.mk
define Device/archer-cxx
KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
define Device/archer-c25-v1
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C25 v1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887
BOARDNAME := ARCHER-C25-V1
TPLINK_BOARD_ID := ARCHER-C25-V1
DEVICE_PROFILE := ARCHERC25V1
IMAGE_SIZE := 7808k
LOADER_TYPE := elf
MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128k(config)ro,64k(art)ro,7808k@0x30000(firmware)
SUPPORTED_DEVICES := archer-c25-v1
endef
TARGET_DEVICES += archer-c25-v1
define Device/archer-c58-v1
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C58 v1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9888
BOARDNAME := ARCHER-C58-V1
TPLINK_BOARD_ID := ARCHER-C58-V1
DEVICE_PROFILE := ARCHERC58V1
IMAGE_SIZE := 7936k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,7936k(firmware),64k(tplink)ro,64k(art)ro
SUPPORTED_DEVICES := archer-c58-v1
endef
TARGET_DEVICES += archer-c58-v1
define Device/archer-c59-v1
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C59 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca9888
BOARDNAME := ARCHER-C59-V1
TPLINK_BOARD_ID := ARCHER-C59-V1
DEVICE_PROFILE := ARCHERC59V1
IMAGE_SIZE := 14528k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1536k(kernel),12992k(rootfs),1664k(tplink)ro,64k(art)ro,14528k@0x20000(firmware)
SUPPORTED_DEVICES := archer-c59-v1
endef
TARGET_DEVICES += archer-c59-v1
define Device/archer-c60-v1
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C60 v1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9888
BOARDNAME := ARCHER-C60-V1
TPLINK_BOARD_ID := ARCHER-C60-V1
DEVICE_PROFILE := ARCHERC60V1
IMAGE_SIZE := 7936k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,7936k(firmware),64k(tplink)ro,64k(art)ro
SUPPORTED_DEVICES := archer-c60-v1
endef
TARGET_DEVICES += archer-c60-v1
define Device/archer-c60-v2
$(Device/archer-c60-v1)
DEVICE_TITLE := TP-LINK Archer C60 v2
BOARDNAME := ARCHER-C60-V2
TPLINK_BOARD_ID := ARCHER-C60-V2
DEVICE_PROFILE := ARCHERC60V2
IMAGE_SIZE := 7808k
MTDPARTS := spi0.0:192k(u-boot)ro,7808k(firmware),128k(tplink)ro,64k(art)ro
SUPPORTED_DEVICES := archer-c60-v2
endef
TARGET_DEVICES += archer-c60-v2
define Device/archer-c5-v1
$(Device/tplink-16mlzma)
DEVICE_TITLE := TP-LINK Archer C5 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C5
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0xc5000001
endef
TARGET_DEVICES += archer-c5-v1
define Device/archer-c7-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK Archer C7 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C7
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0x75000001
endef
TARGET_DEVICES += archer-c7-v1
define Device/archer-c7-v2
$(Device/tplink-16mlzma)
DEVICE_TITLE := TP-LINK Archer C7 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C7-V2
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0xc7000002
IMAGES := sysupgrade.bin factory.bin factory-us.bin factory-eu.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += archer-c7-v2
define Device/archer-c7-v2-il
$(Device/tplink-16mlzma)
DEVICE_TITLE := TP-LINK Archer C7 v2 (IL)
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C7-V2
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0xc7000002
TPLINK_HWREV := 0x494c0001
endef
TARGET_DEVICES += archer-c7-v2-il
define Device/tl-wdr7500-v3
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK Archer C7 v3
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C7
DEVICE_PROFILE := ARCHERC7
TPLINK_HWID := 0x75000003
endef
TARGET_DEVICES += tl-wdr7500-v3
define Device/archer-c7-v4
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C7 v4
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := ARCHER-C7-V4
TPLINK_BOARD_ID := ARCHER-C7-V4
IMAGE_SIZE := 15104k
LOADER_TYPE := elf
MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,1536k(kernel),13568k(rootfs),960k(config)ro,64k(art)ro,15104k@0x40000(firmware)
SUPPORTED_DEVICES := archer-c7-v4
endef
TARGET_DEVICES += archer-c7-v4
define Device/archer-c7-v5
$(Device/archer-c7-v4)
DEVICE_TITLE := TP-LINK Archer C7 v5
BOARDNAME := ARCHER-C7-V5
TPLINK_BOARD_ID := ARCHER-C7-V5
IMAGE_SIZE := 15104k
MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,64k@0x50000(art)ro,1536k@0xc0000(kernel),13824k(rootfs),15360k@0xc0000(firmware)
SUPPORTED_DEVICES := archer-c7-v5
endef
TARGET_DEVICES += archer-c7-v5
define Device/cpexxx
DEVICE_PACKAGES := rssileds
MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,1792k(kernel),5888k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
IMAGE_SIZE := 7680k
DEVICE_PROFILE := CPE510
LOADER_TYPE := elf
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
define Device/cpe510-520-v1
$(Device/cpexxx)
DEVICE_TITLE := TP-LINK CPE510/520 v1
BOARDNAME := CPE510
TPLINK_BOARD_ID := CPE510
LOADER_FLASH_OFFS := 0x43000
COMPILE := loader-$(1).elf
COMPILE/loader-$(1).elf := loader-okli-compile
KERNEL := kernel-bin | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 12288
endef
TARGET_DEVICES += cpe510-520-v1
define Device/cpe210-220-v1
$(Device/cpe510-520-v1)
DEVICE_TITLE := TP-LINK CPE210/220 v1
BOARDNAME := CPE210
TPLINK_BOARD_ID := CPE210
endef
TARGET_DEVICES += cpe210-220-v1
define Device/cpe210-v2
$(Device/cpexxx)
DEVICE_TITLE := TP-LINK CPE210 v2
BOARDNAME := CPE210V2
TPLINK_BOARD_ID := CPE210V2
KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
TPLINK_HEADER_VERSION := 1
endef
TARGET_DEVICES += cpe210-v2
define Device/wbs210-v1
$(Device/cpe510-520-v1)
DEVICE_TITLE := TP-LINK WBS210 v1
BOARDNAME := WBS210
TPLINK_BOARD_ID := WBS210
endef
TARGET_DEVICES += wbs210-v1
define Device/wbs510-v1
$(Device/cpe510-520-v1)
DEVICE_TITLE := TP-LINK WBS510 v1
BOARDNAME := WBS510
TPLINK_BOARD_ID := WBS510
endef
TARGET_DEVICES += wbs510-v1
define Device/eap120-v1
DEVICE_TITLE := TP-LINK EAP120 v1
MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,1536k(kernel),14336k(rootfs),192k(config)ro,64k(ART)ro,15872k@0x40000(firmware)
IMAGE_SIZE := 15872k
BOARDNAME := EAP120
TPLINK_BOARD_ID := EAP120
DEVICE_PROFILE := EAP120
LOADER_TYPE := elf
KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
TARGET_DEVICES += eap120-v1
define Device/re355-v1
DEVICE_TITLE := TP-LINK RE355 v1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
MTDPARTS := spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro
IMAGE_SIZE := 7936k
BOARDNAME := RE355
TPLINK_BOARD_ID := RE355
DEVICE_PROFILE := RE355
LOADER_TYPE := elf
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
TPLINK_HEADER_VERSION := 1
KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
TARGET_DEVICES += re355-v1
define Device/re450-v1
DEVICE_TITLE := TP-LINK RE450 v1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
MTDPARTS := spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro
IMAGE_SIZE := 7936k
BOARDNAME := RE450
TPLINK_BOARD_ID := RE450
DEVICE_PROFILE := RE450
LOADER_TYPE := elf
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
TPLINK_HEADER_VERSION := 1
KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
TARGET_DEVICES += re450-v1
define Device/tl-mr6400-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-MR6400 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb-enablemodem
BOARDNAME := TL-MR6400
DEVICE_PROFILE := TLMR6400
TPLINK_HWID := 0x64000001
endef
TARGET_DEVICES += tl-mr6400-v1
define Device/tl-wdr3500-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WDR3500 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WDR3500
DEVICE_PROFILE := TLWDR4300
TPLINK_HWID := 0x35000001
endef
TARGET_DEVICES += tl-wdr3500-v1
define Device/tl-wdr3600-v1
$(Device/tl-wdr3500-v1)
DEVICE_TITLE := TP-LINK TL-WDR3600 v1
BOARDNAME := TL-WDR4300
TPLINK_HWID := 0x36000001
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C US
endef
TARGET_DEVICES += tl-wdr3600-v1
define Device/tl-wdr4300-v1
$(Device/tl-wdr3600-v1)
DEVICE_TITLE := TP-LINK TL-WDR4300 v1
TPLINK_HWID := 0x43000001
endef
TARGET_DEVICES += tl-wdr4300-v1
define Device/tl-wdr4300-v1-il
$(Device/tl-wdr3500-v1)
DEVICE_TITLE := TP-LINK TL-WDR4300 v1 (IL)
BOARDNAME := TL-WDR4300
TPLINK_HWID := 0x43008001
endef
TARGET_DEVICES += tl-wdr4300-v1-il
define Device/tl-wdr4310-v1
$(Device/tl-wdr4300-v1-il)
DEVICE_TITLE := TP-LINK TL-WDR4310 v1
TPLINK_HWID := 0x43100001
endef
TARGET_DEVICES += tl-wdr4310-v1
define Device/tl-wdr4900-v2
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WDR4900 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WDR4900-v2
DEVICE_PROFILE := TLWDR4900V2
TPLINK_HWID := 0x49000002
endef
TARGET_DEVICES += tl-wdr4900-v2
define Device/tl-wdr6500-v2
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WDR6500 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma | tplink-v1-header
BOARDNAME := TL-WDR6500-v2
DEVICE_PROFILE := TLWDR6500V2
TPLINK_HWID := 0x65000002
TPLINK_HEADER_VERSION := 2
endef
TARGET_DEVICES += tl-wdr6500-v2
define Device/mw4530r-v1
$(Device/tl-wdr4300-v1)
DEVICE_TITLE := Mercury MW4530R v1
TPLINK_HWID := 0x45300001
endef
TARGET_DEVICES += mw4530r-v1
define Device/tl-wpa8630-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WPA8630 v1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := TL-WPA8630
DEVICE_PROFILE := TL-WPA8630
TPLINK_HWID := 0x86300001
endef
TARGET_DEVICES += tl-wpa8630-v1
define Device/tl-wr1043n-v5
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK TL-WR1043N v5
BOARDNAME := TL-WR1043N-v5
SUPPORTED_DEVICES := tl-wr1043n-v5
DEVICE_PROFILE := TLWR1043
MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,15104k(firmware),128k(product-info)ro,640k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(art)ro
IMAGE_SIZE := 15104k
TPLINK_BOARD_ID := TLWR1043NV5
endef
TARGET_DEVICES += tl-wr1043n-v5
define Device/tl-wr1043nd-v1
$(Device/tplink-8m)
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR1043ND
DEVICE_PROFILE := TLWR1043
TPLINK_HWID := 0x10430001
endef
TARGET_DEVICES += tl-wr1043nd-v1
define Device/tl-wr1043nd-v2
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR1043ND-v2
DEVICE_PROFILE := TLWR1043
TPLINK_HWID := 0x10430002
endef
TARGET_DEVICES += tl-wr1043nd-v2
define Device/tl-wr1043nd-v3
$(Device/tl-wr1043nd-v2)
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v3
TPLINK_HWID := 0x10430003
endef
TARGET_DEVICES += tl-wr1043nd-v3
define Device/tl-wr1043nd-v4
$(Device/tplink)
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v4
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR1043ND-v4
DEVICE_PROFILE := TLWR1043
TPLINK_HWID := 0x10430004
MTDPARTS := spi0.0:128k(u-boot)ro,1536k(kernel),14016k(rootfs),128k(product-info)ro,320k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(ART)ro,15552k@0x20000(firmware)
IMAGE_SIZE := 15552k
TPLINK_BOARD_ID := TLWR1043NDV4
KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
TARGET_DEVICES += tl-wr1043nd-v4
define Device/tl-wr2543-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR2543N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR2543N
DEVICE_PROFILE := TLWR2543
TPLINK_HWID := 0x25430001
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -v 3.13.99
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -v 3.13.99
endef
TARGET_DEVICES += tl-wr2543-v1
define Device/tl-wr710n-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR710N v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := TL-WR710N
DEVICE_PROFILE := TLWR710
TPLINK_HWID := 0x07100001
CONSOLE := ttyATH0,115200
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C US
endef
TARGET_DEVICES += tl-wr710n-v1
define Device/tl-wr710n-v2.1
$(Device/tl-wr710n-v1)
DEVICE_TITLE := TP-LINK TL-WR710N v2.1
TPLINK_HWID := 0x07100002
TPLINK_HWREV := 0x00000002
endef
TARGET_DEVICES += tl-wr710n-v2.1
define Device/tl-wr810n-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR810N v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := TL-WR810N
DEVICE_PROFILE := TLWR810
TPLINK_HWID := 0x08100001
endef
TARGET_DEVICES += tl-wr810n-v1
define Device/tl-wr810n-v2
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR810N v2
BOARDNAME := TL-WR810N-v2
DEVICE_PROFILE := TLWR810
TPLINK_HWID := 0x08100002
endef
TARGET_DEVICES += tl-wr810n-v2
define Device/tl-wr842n-v1
$(Device/tplink-8m)
DEVICE_TITLE := TP-LINK TL-WR842N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-MR3420
DEVICE_PROFILE := TLWR842
TPLINK_HWID := 0x08420001
endef
TARGET_DEVICES += tl-wr842n-v1
define Device/tl-wr842n-v2
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WR842N/ND v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR842N-v2
DEVICE_PROFILE := TLWR842
TPLINK_HWID := 0x8420002
endef
TARGET_DEVICES += tl-wr842n-v2
define Device/tl-wr842n-v3
$(Device/tplink-16mlzma)
DEVICE_TITLE := TP-LINK TL-WR842N/ND v3
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR842N-v3
DEVICE_PROFILE := TLWR842
TPLINK_HWID := 0x08420003
endef
TARGET_DEVICES += tl-wr842n-v3
define Device/tl-wr902ac-v1
DEVICE_TITLE := TP-LINK TL-WR902AC v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport \
kmod-ath10k ath10k-firmware-qca9887 -swconfig -uboot-envtools
BOARDNAME := TL-WR902AC-V1
DEVICE_PROFILE := TLWR902
TPLINK_BOARD_ID := TL-WR902AC-V1
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
TPLINK_HEADER_VERSION := 1
SUPPORTED_DEVICES := tl-wr902ac-v1
IMAGE_SIZE := 7360k
KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
append-metadata | check-size $$$$(IMAGE_SIZE)
MTDPARTS := spi0.0:128k(u-boot)ro,7360k(firmware),640k(tplink)ro,64k(art)ro
endef
TARGET_DEVICES += tl-wr902ac-v1
define Device/tl-wr942n-v1
DEVICE_TITLE := TP-LINK TL-WR942N v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := TL-WR942N-V1
TPLINK_BOARD_ID := TLWR942NV1
DEVICE_PROFILE := TLWR942
IMAGE_SIZE := 14464k
KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
MTDPARTS := spi0.0:128k(u-boot)ro,14464k(firmware),64k(product-info)ro,64k(partition-table)ro,256k(oem-config)ro,1344k(oem-vars)ro,64k(ART)ro
SUPPORTED_DEVICES := tl-wr942n-v1
endef
TARGET_DEVICES += tl-wr942n-v1
Reference in a new issue View git blame Copy permalink