KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
Hauke Mehrtens fa137d51f5 ar71xx: add Arduino Yun 
This is based on patches from Federico Fissore <f.fissore@arduino.cc>
especially this one:
7e2976fa83

The console is running with 250000 baud which is a non standard baud
rate and needs an extra patch to be applied, I will try to get this
patch upstream or something else which accomplish the same.

Some upstream code looks like there are many different versions of this
SoC, are these only internal versions and all versions on the consumer
market are the same? I saw different GPIO configuration and flash sizes
of 8MB and 16MB?

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47451
2015-11-10 23:13:09 +00:00

532 lines
12 KiB
Bash
Raw Blame History

#!/bin/sh
#
# Copyright (C) 2011 OpenWrt.org
#
[ -e /etc/config/network ] && exit 0
touch /etc/config/network
. /lib/functions/uci-defaults.sh
. /lib/ar71xx.sh
ucidef_set_interface_loopback
board=$(ar71xx_board_name)
case "$board" in
all0315n |\
all0258n |\
ja76pf2|\
rocket-m-ti |\
ubnt-unifi-outdoor)
ucidef_set_interface_lan "eth0 eth1"
;;
ap132 |\
wlr8100)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
ucidef_add_switch_vlan "switch0" "2" "0t 1"
;;
esr1750 |\
epg5000)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "0t 5"
;;
ap136-010)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "5 6"
;;
ap147-010)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "5 6"
;;
ap136-020 |\
ap135-020 |\
tl-wr1043nd-v2 |\
wzr-450hp2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "5 6"
;;
archer-c5 |\
archer-c7 |\
tl-wdr4900-v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 2 3 4 5"
ucidef_add_switch_vlan "switch0" "2" "1 6"
;;
bsb)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 3"
ucidef_set_interface_wlan
;;
cpe510)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 5"
ucidef_add_switch_vlan "switch0" "2" "0t 4"
;;
airgatewaypro)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 4"
ucidef_add_switch_vlan "switch0" "2" "0t 5"
;;
db120 |\
rb-2011l | \
rb-2011uas |\
rb-2011uias |\
rb-2011uas-2hnd|\
rb-2011uias-2hnd)
ucidef_set_interfaces_lan_wan "eth0.1 eth1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
ucidef_add_switch_vlan "switch0" "2" "0t 1"
ucidef_add_switch "switch1" "1" "1"
ucidef_add_switch_vlan "switch1" "1" "0 1 2 3 4 5"
case "$board" in
rb-2011uas* | rb-2011uias | rb-2011uias-2hnd)
ucidef_set_interface_raw "sfp" "eth0.3"
ucidef_add_switch_vlan "switch0" "3" "0t 6"
;;
esac
;;
dir-825-b1|\
tew-673gru)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
;;
f9k1115v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "2 3 4 5 6"
ucidef_add_switch_vlan "switch0" "2" "0 1"
;;
nbg460n_550n_550nh)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "0" "0 1 2 3 5"
;;
nbg6616 |\
nbg6716)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "5 6"
;;
ap143 |\
rb-433 |\
rb-433u)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 5"
;;
rb-435g)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2"
;;
rb-450)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5"
;;
rb-450g |\
routerstation-pro)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
;;
ap136 |\
rb-750gl |\
rb-751g |\
rb-951g-2hnd |\
wzr-hp-g450h)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
ucidef_add_switch_vlan "switch0" "2" "0t 1"
;;
rb-951ui-2hnd)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
rb-493g)
ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
ucidef_add_switch "switch1" "1" "1"
ucidef_add_switch_vlan "switch1" "1" "0t 1 2 3 4"
ucidef_add_switch_vlan "switch1" "2" "0t 5"
;;
wzr-hp-g300nh2 |\
pb92 |\
ap113)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 1 3 4 5"
ucidef_add_switch_vlan "switch0" "2" "0t 2"
;;
el-m150)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 3"
;;
tl-wdr4300|\
tl-wr1041n-v2)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
ucidef_add_switch_vlan "switch0" "2" "0t 1"
;;
tl-wr1043nd)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
ucidef_add_switch_vlan "switch0" "2" "0 5t"
;;
tl-wr2543n)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t"
ucidef_add_switch_vlan "switch0" "2" "0 9t"
;;
tl-wr841n-v1|\
tl-wr941nd)
ucidef_set_interface_raw "eth" "eth0"
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
dir-615-i1 |\
r6100 |\
smart-300 |\
tl-mr3420-v2 |\
tl-wr841n-v8 |\
tl-wr842n-v2 |\
tl-wr941nd-v5 |\
tl-wr941nd-v6 |\
tl-wdr6500-v2 |\
wnr2000-v3 |\
wnr2000-v4 |\
wnr2200 |\
wnr612-v2 |\
wnr1000-v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
;;
uap-pro)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 1"
ucidef_add_switch_vlan "switch0" "2" "0t 2"
;;
nanostation-m-xw)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 5"
ucidef_add_switch_vlan "switch0" "2" "0t 1"
;;
wrt160nl)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 5"
;;
wzr-hp-g300nh)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
;;
dgl-5500-a1 |\
dir-825-c1)
local mac
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "0t 5"
mac=$(mtd_get_mac_ascii nvram "wan_mac")
[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
;;
mynet-n750)
local mac
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "0t 5"
mac=$(mtd_get_mac_ascii devdata "wanmac")
[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
;;
onion-omega)
ucidef_set_interface_lan "wlan0"
;;
dhp-1565-a1 |\
dir-835-a1 |\
wndr3700v4 | \
wndr4300)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "0t 5"
mac_lan=$(mtd_get_mac_binary caldata 0)
[ -n "$mac_lan" ] && ucidef_set_interface_macaddr "lan" "$mac_lan"
mac_wan=$(mtd_get_mac_binary caldata 6)
[ -n "$mac_wan" ] && ucidef_set_interface_macaddr "wan" "$mac_wan"
;;
esr900)
local mac
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "0t 5"
mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
;;
dlan-pro-500-wp)
ucidef_set_interface_lan "eth0 eth1"
;;
dlan-pro-1200-ac)
ucidef_set_interface_lan "eth0"
ucidef_add_switch "switch0" "1" "0"
ucidef_add_switch_vlan "switch0" "0" "0 2 3 4"
;;
all0305 |\
antminer-s1 |\
antminer-s3 |\
aw-nr580 |\
bullet-m |\
cap4200ag |\
eap300v2 |\
eap7660d |\
el-mini |\
loco-m-xw |\
mr1750 |\
mr600 |\
mr600v2 |\
mr900 |\
mr900v2 |\
rb-411 |\
rb-911g-2hpnd |\
rb-911g-5hpacd |\
rb-911g-5hpnd |\
rb-912uag-2hpnd |\
rb-912uag-5hpnd |\
rb-sxt2n |\
rb-sxt5n |\
rocket-m-xw |\
tl-mr10u |\
tl-mr11u |\
tl-mr12u |\
tl-mr13u |\
tl-mr3020 |\
tl-mr3040 |\
tl-mr3040-v2 |\
tl-wa701nd-v2 |\
tl-wa7210n-v2 |\
tl-wa750re |\
tl-wa850re |\
tl-wa830re-v2 |\
tl-wa801nd-v2 |\
tl-wa901nd |\
tl-wa901nd-v2 |\
tl-wa901nd-v3 |\
tl-wr703n |\
tube2h |\
wndap360 |\
mynet-rext |\
wp543)
ucidef_set_interface_lan "eth0"
;;
arduino-yun | \
dir-505-a1)
ucidef_set_interface_lan "eth1"
;;
alfa-ap96 |\
alfa-nx |\
ap83 |\
gl-inet |\
jwap003 |\
pb42 |\
pb44 |\
routerstation|\
tl-wr710n |\
tl-wr720n-v3|\
wpe72)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
wpj344)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 3"
ucidef_add_switch_vlan "switch0" "2" "0t 2"
;;
wpj531)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
wpj558)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "5 6t"
ucidef_add_switch_vlan "switch0" "2" "1 6t"
;;
ap121 |\
ap121-mini |\
ap96 |\
airrouter |\
dir-600-a1 |\
dir-615-c1 |\
dir-615-e1 |\
dir-615-e4 |\
hiwifi-hc6361 |\
ja76pf |\
mc-mac1200r|\
minibox-v1 |\
mynet-n600 |\
oolite |\
qihoo-c301 |\
rb-750 |\
rb-751 |\
tew-632brp |\
tew-712br |\
tl-mr3220 |\
tl-mr3220-v2 |\
tl-mr3420 |\
tl-wdr3320-v2 |\
tl-wdr3500 |\
tl-wr741nd |\
tl-wr741nd-v4 |\
tl-wr841n-v7 |\
tl-wr841n-v9 |\
whr-g301n |\
whr-hp-g300n |\
whr-hp-gn |\
wzr-hp-ag300h)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
;;
wzr-hp-g450h)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
ucidef_add_switch_vlan "switch0" "2" "0t 1"
;;
ew-dorin)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 1 2"
ucidef_add_switch_vlan "switch0" "2" "0t 3"
;;
ew-dorin-router)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 2 3"
;;
wndr3700)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
uci set network.@switch[-1].blinkrate='2'
ucidef_add_switch_port "switch0" "1"
# Port 1 controls the GREEN configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
#
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
# 14: Link (master); 15: separate register
uci set network.@switch_port[-1].led='6'
ucidef_add_switch_port "switch0" "2"
# Port 2 controls the ORANGE configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
uci set network.@switch_port[-1].led='9'
ucidef_add_switch_port "switch0" "5"
# Port 5 controls the configuration of the WAN LED and the
# section does not correspond to a real switch port.
#
# To toggle the use of green or orange LEDs for the WAN port,
# see the LED setting for wndr3700:green:wan in /etc/config/system.
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
uci set network.@switch_port[-1].led='2'
;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
esac
uci commit network
exit 0
Reference in a new issue View git blame Copy permalink