KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/package/boot/uboot-layerscape/patches/0038-Shift-board-specific-configurations.patch
Yutang Jiang 15a14cf166 layerscape: add 64b/32b target for ls1012ardb device 
The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00

228 lines
6.7 KiB
Diff
Raw Blame History

From 8f096adfd96941e596b5fbf30a21193e32f2c1b0 Mon Sep 17 00:00:00 2001
From: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Date: Fri, 27 May 2016 15:10:40 +0530
Subject: [PATCH 38/93] Shift board specific configurations
Board specific configurations are moved from
ls1012a_common.h to ls1012aqds.h and ls1012ardb.h
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
---
include/configs/ls1012a_common.h | 60 --------------------------------------
include/configs/ls1012aqds.h | 58 ++++++++++++++++++++++++++++++++++++
include/configs/ls1012ardb.h | 58 ++++++++++++++++++++++++++++++++++++
3 files changed, 116 insertions(+), 60 deletions(-)
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 89d1370..07ef7c6 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -88,66 +88,6 @@
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#endif /* CONFIG_EMU */
-/* MMC */
-#if !defined(CONFIG_EMU)
-#define CONFIG_MMC
-#ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_ESDHC_TWO_CONTROLLERS_SUPPORT
-#define CONFIG_FSL_ESDHC_1_NON_REMOVABLE_CARD
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-#endif /* CONFIG_EMU */
-
-/* SATA */
-#if !defined(CONFIG_EMU)
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_DOS_PARTITION
-#define CONFIG_BOARD_LATE_INIT
-
-#define CONFIG_SYS_SATA AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
-#define CONFIG_SYS_SCSI_MAX_LUN 1
-#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
- CONFIG_SYS_SCSI_MAX_LUN)
-
-#define CONFIG_PCI /* Enable PCI/PCIE */
-#define CONFIG_PCIE1 /* PCIE controller 1 */
-#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
-#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
-
-#define CONFIG_SYS_PCI_64BIT
-
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */
-
-#define CONFIG_SYS_PCIE_IO_BUS 0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000
-#define CONFIG_SYS_PCIE_MEM_SIZE 0x80000000 /* 128M */
-
-#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP
-#define CONFIG_E1000
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI
-#endif
-
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index de998b8..488811b 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -26,6 +26,64 @@
#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
#endif
+/* MMC */
+#if !defined(CONFIG_EMU)
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+#endif /* CONFIG_EMU */
+
+/* SATA */
+#if !defined(CONFIG_EMU)
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_SYS_SATA AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
+#define CONFIG_PCI /* Enable PCI/PCIE */
+#define CONFIG_PCIE1 /* PCIE controller 1 */
+#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
+#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
+
+#define CONFIG_SYS_PCI_64BIT
+
+#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
+#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */
+#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000
+#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */
+
+#define CONFIG_SYS_PCIE_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000
+#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */
+
+#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000
+#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000
+#define CONFIG_SYS_PCIE_MEM_SIZE 0x80000000 /* 128M */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP
+#define CONFIG_E1000
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+#endif
+
/*
* QIXIS Definitions
*/
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index b40e02b..1629e19 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -55,6 +55,64 @@
#define CONFIG_CMD_USB_MASS_STORAGE
#endif
+/* MMC */
+#if !defined(CONFIG_EMU)
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+#endif /* CONFIG_EMU */
+
+/* SATA */
+#if !defined(CONFIG_EMU)
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_SYS_SATA AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
+#define CONFIG_PCI /* Enable PCI/PCIE */
+#define CONFIG_PCIE1 /* PCIE controller 1 */
+#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
+#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
+
+#define CONFIG_SYS_PCI_64BIT
+
+#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
+#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */
+#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000
+#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */
+
+#define CONFIG_SYS_PCIE_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000
+#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */
+
+#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000
+#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000
+#define CONFIG_SYS_PCIE_MEM_SIZE 0x80000000 /* 128M */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP
+#define CONFIG_E1000
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+#endif
+
/*
* I2C IO expander
*/
--
1.7.9.5
Reference in a new issue View git blame Copy permalink