KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/package/boot/uboot-layerscape/patches/0017-armv8-fsl-layerscape-add-dwc3-gadget-driver-support.patch
Yutang Jiang 15a14cf166 layerscape: add 64b/32b target for ls1012ardb device 
The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00

465 lines
14 KiB
Diff
Raw Blame History

From f160c56c71c59d2d865142fdeb3040e9cc4b6a77 Mon Sep 17 00:00:00 2001
From: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Date: Mon, 25 Apr 2016 17:14:25 +0530
Subject: [PATCH 17/93] armv8/fsl-layerscape: add dwc3 gadget driver support
Implements the dwc3 gadget driver support for LS1043
and LS1012 platform.
NOTE: Do not upstream this patch.It needs rework for open source
submission.
Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
---
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 98 +++++++++++++++++++-
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 6 ++
.../include/asm/arch-fsl-layerscape/sys_proto.h | 10 ++
common/cmd_usb_mass_storage.c | 2 +-
drivers/usb/dwc3/core.c | 12 +++
drivers/usb/dwc3/ep0.c | 10 +-
drivers/usb/dwc3/gadget.c | 11 ++-
drivers/usb/dwc3/io.h | 8 +-
drivers/usb/gadget/f_mass_storage.c | 10 +-
include/configs/ls1012aqds.h | 15 +++
include/configs/ls1012ardb.h | 15 +++
include/configs/ls1043aqds.h | 15 +++
12 files changed, 197 insertions(+), 15 deletions(-)
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index ec561a7..0a170eb 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -19,6 +19,10 @@
#ifdef CONFIG_CHAIN_OF_TRUST
#include <fsl_validate.h>
#endif
+#include <usb.h>
+#include <dwc3-uboot.h>
+#include <linux/usb/xhci-fsl.h>
+
DECLARE_GLOBAL_DATA_PTR;
@@ -406,9 +410,19 @@ void fsl_lsch2_early_init_f(void)
#if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT)
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
#endif
- /* Make SEC reads and writes snoopable */
+
+#if defined(CONFIG_LS1043A)
+ /* Make SEC and USB reads and writes snoopable */
setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
- SCFG_SNPCNFGCR_SECWRSNP);
+ SCFG_SNPCNFGCR_SECWRSNP | SCFG_SNPCNFGCR_USB1RDSNP |
+ SCFG_SNPCNFGCR_USB1WRSNP | SCFG_SNPCNFGCR_USB2RDSNP |
+ SCFG_SNPCNFGCR_USB2WRSNP | SCFG_SNPCNFGCR_USB3RDSNP |
+ SCFG_SNPCNFGCR_USB3WRSNP);
+#elif defined(CONFIG_LS1012A)
+ /* Make SEC and reads and writes snoopable */
+ setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | SCFG_SNPCNFGCR_SECWRSNP |
+ SCFG_SNPCNFGCR_USB1RDSNP | SCFG_SNPCNFGCR_USB1WRSNP);
+#endif
/*
* Enable snoop requests and DVM message requests for
@@ -428,6 +442,86 @@ void fsl_lsch2_early_init_f(void)
}
#endif
+#ifdef CONFIG_USB_DWC3
+
+#if defined(CONFIG_LS1043A) || defined(CONFIG_LS1012A)
+static struct dwc3_device dwc3_device_data0 = {
+ .maximum_speed = USB_SPEED_HIGH,
+ .base = CONFIG_SYS_FSL_XHCI_USB1_ADDR,
+ .dr_mode = USB_DR_MODE_PERIPHERAL,
+ .index = 0,
+};
+
+#if defined(CONFIG_LS1043A)
+static struct dwc3_device dwc3_device_data1 = {
+ .maximum_speed = USB_SPEED_HIGH,
+ .base = CONFIG_SYS_FSL_XHCI_USB2_ADDR,
+ .dr_mode = USB_DR_MODE_PERIPHERAL,
+ .index = 1,
+};
+
+static struct dwc3_device dwc3_device_data2 = {
+ .maximum_speed = USB_SPEED_HIGH,
+ .base = CONFIG_SYS_FSL_XHCI_USB3_ADDR,
+ .dr_mode = USB_DR_MODE_PERIPHERAL,
+ .index = 2,
+};
+#endif
+
+int usb_gadget_handle_interrupts(int index)
+{
+ dwc3_uboot_handle_interrupt(index);
+ return 0;
+}
+#endif
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ switch (init) {
+ case USB_INIT_DEVICE:
+ switch (index) {
+#if defined(CONFIG_LS1043A) || defined(CONFIG_LS1012A)
+ case 0:
+ dwc3_uboot_init(&dwc3_device_data0);
+ break;
+
+#if defined(CONFIG_LS1043A)
+ case 1:
+ dwc3_uboot_init(&dwc3_device_data1);
+ break;
+ case 2:
+ dwc3_uboot_init(&dwc3_device_data2);
+ break;
+#endif
+#endif
+ default:
+ printf("Invalid Controller Index\n");
+ return -1;
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+ switch (init) {
+ case USB_INIT_DEVICE:
+#if defined(CONFIG_LS1043A) || defined(CONFIG_LS1012A)
+ dwc3_uboot_exit(index);
+#endif
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+#endif
+
+
+
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 5b026f8..414a222 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -355,6 +355,12 @@ struct ccsr_gur {
#define SCFG_SNPCNFGCR_SECRDSNP 0x80000000
#define SCFG_SNPCNFGCR_SECWRSNP 0x40000000
+#define SCFG_SNPCNFGCR_USB1RDSNP 0x00200000
+#define SCFG_SNPCNFGCR_USB1WRSNP 0x00100000
+#define SCFG_SNPCNFGCR_USB2RDSNP 0x00008000
+#define SCFG_SNPCNFGCR_USB2WRSNP 0x00010000
+#define SCFG_SNPCNFGCR_USB3RDSNP 0x00002000
+#define SCFG_SNPCNFGCR_USB3WRSNP 0x00004000
/* Supplemental Configuration Unit */
struct ccsr_scfg {
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h b/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
new file mode 100644
index 0000000..1e31d3d
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
@@ -0,0 +1,10 @@
+/*
+ * Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_
+#define _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_
+
+#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_ */
diff --git a/common/cmd_usb_mass_storage.c b/common/cmd_usb_mass_storage.c
index 0407389..7d507b5 100644
--- a/common/cmd_usb_mass_storage.c
+++ b/common/cmd_usb_mass_storage.c
@@ -140,7 +140,7 @@ int do_usb_mass_storage(cmd_tbl_t *cmdtp, int flag,
while (1) {
usb_gadget_handle_interrupts(controller_index);
- rc = fsg_main_thread(NULL);
+ rc = fsg_main_thread(&controller_index);
if (rc) {
/* Check I/O error */
if (rc == -EIO)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 85cc96a..b8e4066 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -690,6 +690,18 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
return -ENOMEM;
}
+#if defined(CONFIG_LS1043A) || defined(CONFIG_LS1012A)
+ /* Change burst beat and outstanding pipelined transfers requests */
+ dwc3_writel(dwc->regs, DWC3_GSBUSCFG0,
+ (dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) & ~0xff) | 0xf);
+ dwc3_writel(dwc->regs, DWC3_GSBUSCFG1,
+ dwc3_readl(dwc->regs, DWC3_GSBUSCFG1) | 0xf00);
+
+ /* Enable snooping */
+ dwc3_writel(dwc->regs, DWC3_GSBUSCFG0,
+ dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) | 0x22220000);
+#endif
+
if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
dwc->dr_mode = USB_DR_MODE_HOST;
else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 12b133f..e61d980 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -81,8 +81,8 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
trb->ctrl |= (DWC3_TRB_CTRL_IOC
| DWC3_TRB_CTRL_LST);
- dwc3_flush_cache((long)buf_dma, len);
- dwc3_flush_cache((long)trb, sizeof(*trb));
+ dwc3_flush_cache((uintptr_t)buf_dma, len);
+ dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
if (chain)
return 0;
@@ -790,7 +790,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
if (!r)
return;
- dwc3_flush_cache((long)trb, sizeof(*trb));
+ dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
status = DWC3_TRB_SIZE_TRBSTS(trb->size);
if (status == DWC3_TRBSTS_SETUP_PENDING) {
@@ -821,7 +821,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
ur->actual += transferred;
trb++;
- dwc3_flush_cache((long)trb, sizeof(*trb));
+ dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
length = trb->size & DWC3_TRB_SIZE_MASK;
ep0->free_slot = 0;
@@ -831,7 +831,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
maxp);
transferred = min_t(u32, ur->length - transferred,
transfer_size - length);
- dwc3_flush_cache((long)dwc->ep0_bounce, DWC3_EP0_BOUNCE_SIZE);
+ dwc3_flush_cache((uintptr_t)dwc->ep0_bounce, DWC3_EP0_BOUNCE_SIZE);
memcpy(buf, dwc->ep0_bounce, transferred);
} else {
transferred = ur->length - length;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 8ff949d..649f1a4 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -244,7 +244,7 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
list_del(&req->list);
req->trb = NULL;
- dwc3_flush_cache((long)req->request.dma, req->request.length);
+ dwc3_flush_cache((uintptr_t)req->request.dma, req->request.length);
if (req->request.status == -EINPROGRESS)
req->request.status = status;
@@ -771,8 +771,8 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
trb->ctrl |= DWC3_TRB_CTRL_HWO;
- dwc3_flush_cache((long)dma, length);
- dwc3_flush_cache((long)trb, sizeof(*trb));
+ dwc3_flush_cache((uintptr_t)dma, length);
+ dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
}
/*
@@ -1769,7 +1769,7 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
slot %= DWC3_TRB_NUM;
trb = &dep->trb_pool[slot];
- dwc3_flush_cache((long)trb, sizeof(*trb));
+ dwc3_flush_cache((uintptr_t)trb, sizeof(*trb));
__dwc3_cleanup_done_trbs(dwc, dep, req, trb, event, status);
dwc3_gadget_giveback(dep, req, status);
@@ -2447,6 +2447,7 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
int left;
u32 reg;
+
evt = dwc->ev_buffs[buf];
left = evt->count;
@@ -2670,7 +2671,7 @@ void dwc3_gadget_uboot_handle_interrupt(struct dwc3 *dwc)
for (i = 0; i < dwc->num_event_buffers; i++) {
evt = dwc->ev_buffs[i];
- dwc3_flush_cache((long)evt->buf, evt->length);
+ dwc3_flush_cache((uintptr_t)evt->buf, evt->length);
}
dwc3_thread_interrupt(0, dwc);
diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
index 0d9fa22..cab5122 100644
--- a/drivers/usb/dwc3/io.h
+++ b/drivers/usb/dwc3/io.h
@@ -48,8 +48,14 @@ static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value)
writel(value, base + offs);
}
-static inline void dwc3_flush_cache(int addr, int length)
+static inline void dwc3_flush_cache(uintptr_t addr, int length)
{
flush_dcache_range(addr, addr + ROUND(length, CACHELINE_SIZE));
}
+
+static inline void dwc3_inval_cache(uintptr_t addr, int length)
+{
+ invalidate_dcache_range(addr, addr + ROUND(length, CACHELINE_SIZE));
+}
+
#endif /* __DRIVERS_USB_DWC3_IO_H */
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index ec1f23a..ec0229f 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -362,6 +362,7 @@ struct fsg_common {
char inquiry_string[8 + 16 + 4 + 1];
struct kref ref;
+ unsigned int controller_index;
};
struct fsg_config {
@@ -690,7 +691,7 @@ static int sleep_thread(struct fsg_common *common)
k = 0;
}
- usb_gadget_handle_interrupts(0);
+ usb_gadget_handle_interrupts(common->controller_index);
}
common->thread_wakeup_needed = 0;
return rc;
@@ -2405,6 +2406,11 @@ int fsg_main_thread(void *common_)
{
int ret;
struct fsg_common *common = the_fsg_common;
+
+ /* update the controller_index */
+ if (common_)
+ common->controller_index = *(unsigned int *)common_;
+
/* The main loop */
do {
if (exception_in_progress(common)) {
@@ -2475,6 +2481,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
common->ops = NULL;
common->private_data = NULL;
+ common->controller_index = 0;
common->gadget = gadget;
common->ep0 = gadget->ep0;
@@ -2769,6 +2776,7 @@ int fsg_add(struct usb_configuration *c)
fsg_common->ops = NULL;
fsg_common->private_data = NULL;
+ fsg_common->controller_index = 0;
the_fsg_common = fsg_common;
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index 6346d3e..fdada18 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -123,6 +123,21 @@
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_EXT2
+
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_G_DNL_MANUFACTURER "NXP Semiconductor"
+#define CONFIG_G_DNL_VENDOR_NUM 0x1234
+#define CONFIG_G_DNL_PRODUCT_NUM 0x1234
+#define CONFIG_USB_GADGET_DUALSPEED
+
+/* USB Gadget ums command */
+#define CONFIG_CMD_USB_MASS_STORAGE
#endif
#define CONFIG_CMD_MEMINFO
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index 9ff5935..af3d33f 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -38,6 +38,21 @@
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_EXT2
+
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_G_DNL_MANUFACTURER "NXP Semiconductor"
+#define CONFIG_G_DNL_VENDOR_NUM 0x1234
+#define CONFIG_G_DNL_PRODUCT_NUM 0x1234
+#define CONFIG_USB_GADGET_DUALSPEED
+
+/* USB Gadget ums command */
+#define CONFIG_CMD_USB_MASS_STORAGE
#endif
/*
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 9828360..9e23615 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -400,6 +400,21 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_EXT2
+
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_G_DNL_MANUFACTURER "NXP Semiconductor"
+#define CONFIG_G_DNL_VENDOR_NUM 0x1234
+#define CONFIG_G_DNL_PRODUCT_NUM 0x1234
+#define CONFIG_USB_GADGET_DUALSPEED
+
+/* USB Gadget ums command */
+#define CONFIG_CMD_USB_MASS_STORAGE
#endif
/*
--
1.7.9.5
Reference in a new issue View git blame Copy permalink