15a14cf166
The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
45 lines
2 KiB
Diff
45 lines
2 KiB
Diff
From 27d1d5620ae352d230189fbea364198398065ae2 Mon Sep 17 00:00:00 2001
|
|
From: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
|
|
Date: Mon, 25 Apr 2016 16:06:48 +0530
|
|
Subject: [PATCH 10/93] driver: mtd: spi: Adding support for QSPI flash
|
|
|
|
Serial number and vendor id are added for QSPI flash
|
|
common on both LS1012AQDS and LS1012ARDB.
|
|
|
|
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
|
|
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
|
|
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
|
|
---
|
|
drivers/mtd/spi/sf_params.c | 1 +
|
|
drivers/mtd/spi/spi_flash.c | 3 ++-
|
|
2 files changed, 3 insertions(+), 1 deletion(-)
|
|
|
|
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
|
|
index 1424f2a..1afb8b3 100644
|
|
--- a/drivers/mtd/spi/sf_params.c
|
|
+++ b/drivers/mtd/spi/sf_params.c
|
|
@@ -68,6 +68,7 @@ const struct spi_flash_params spi_flash_params_table[] = {
|
|
{"S25FL256S_256K", 0x010219, 0x4d00, 256 * 1024, 128, RD_FULL, WR_QPP},
|
|
{"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, RD_FULL, WR_QPP},
|
|
{"S25FS512S", 0x010220, 0x0102, 256 * 1024, 256, RD_FULL, WR_QPP},
|
|
+ {"S25FS512S_256K", 0x010220, 0x4D00, 128 * 1024, 512, RD_FULL, WR_QPP},
|
|
{"S25FL512S_256K", 0x010220, 0x4d00, 256 * 1024, 256, RD_FULL, WR_QPP},
|
|
{"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL, WR_QPP},
|
|
{"S25FL512S_512K", 0x010220, 0x4f00, 256 * 1024, 256, RD_FULL, WR_QPP},
|
|
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
|
|
index 2d23aee..865e929 100644
|
|
--- a/drivers/mtd/spi/spi_flash.c
|
|
+++ b/drivers/mtd/spi/spi_flash.c
|
|
@@ -1033,7 +1033,8 @@ int spi_flash_scan(struct spi_flash *flash)
|
|
* sector that is not overlaid by the parameter sectors.
|
|
* The uniform sector erase command has no effect on parameter sectors.
|
|
*/
|
|
- if (jedec == 0x0219 && (ext_jedec & 0xff00) == 0x4d00) {
|
|
+ if ((jedec == 0x0219 || (jedec == 0x0220)) &&
|
|
+ (ext_jedec & 0xff00) == 0x4d00) {
|
|
int ret;
|
|
u8 id[6];
|
|
|
|
--
|
|
1.7.9.5
|
|
|