openwrtv4/target/linux/lantiq/dts/ARV4510PW.dts
John Crispin 4cf3fd49fc lantiq: add support for indicating the boot state using three leds
The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to
indicate the current boot state. This patch adds support for such cases.

The existing led sequences should be the same as before.

Boards which are using a led different from power (like TDW89x0) are
changed to switch of the led after boot

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48041
2016-01-01 21:18:47 +00:00

224 lines
3.7 KiB
Text

/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "ARV4510PW - Wippies, Elisa";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power;
failsafe = &power2;
running = &power;
dsl = &adsl;
internet = &internet;
usb = &usb;
usb2 = &usb2;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
lantiq,noxip;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xfa0000>;
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu a23";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
exin {
lantiq,groups = "exin1", "exin2";
lantiq,function = "exin";
lantiq,output = <0>;
};
pci_in {
lantiq,groups = "req1", "req2";
lantiq,function = "pci";
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1", "gnt2";
lantiq,function = "pci";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
buttons {
lantiq,pins = "io3", "io14";
lantiq,pull = <2>;
lantiq,output = <0>;
};
};
};
gpios: stp@E100BB0 {
status = "okay";
lantiq,groups = <0x7>;
};
etop@E180000 {
phy-mode = "rmii";
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
interrupt-map = <
0x6000 0 0 1 &icu0 135
0x7800 0 0 1 &icu0 66
0x7800 0 0 2 &icu0 66
0x7800 0 0 3 &icu0 66
>;
gpio-reset = <&gpio 21 0>;
req-mask = <0x7>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 14 1>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio 3 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "power";
gpios = <&gpios 21 0>;
default-state = "keep";
};
power2: power2 {
label = "power2";
gpios = <&gpios 20 0>;
};
lan1 {
label = "lan1";
gpios = <&gpios 19 0>;
};
lan2 {
label = "lan2";
gpios = <&gpios 18 0>;
};
lan3 {
label = "lan3";
gpios = <&gpios 17 0>;
};
lan4 {
label = "lan4";
gpios = <&gpios 16 0>;
};
wifi: wifi {
label = "wifi";
gpios = <&gpios 15 0>;
};
adsl: adsl {
label = "adsl";
gpios = <&gpios 14 0>;
};
internet: internet {
label = "internet";
gpios = <&gpios 13 0>;
};
internet2 {
label = "internet2";
gpios = <&gpios 12 0>;
};
voip {
label = "voip";
gpios = <&gpios 11 0>;
};
phone {
label = "phone";
gpios = <&gpios 10 0>;
};
phone2 {
label = "phone2";
gpios = <&gpios 9 0>;
};
usb: usb {
label = "usb";
gpios = <&gpios 8 0>;
};
usb2: usb2 {
label = "usb2";
gpios = <&gpios 7 0>;
};
usb3 {
label = "usb3";
gpios = <&gpios 6 0>;
};
unlabeled {
label = "unlabeled";
gpios = <&gpios 5 0>;
};
};
};