openwrtv4/target/linux/lantiq/dts/ACMP252.dts
blogic b7fc892eb5 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-10 10:43:12 +02:00

101 lines
1.6 KiB
Text

/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "ACMP252 - AudioCodes MediaPack MP-252";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 0>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "uboot_env";
reg = <0x20000 0x20000>;
};
partition@40000 {
label = "boardconfig";
reg = <0x40000 0x60000>;
read-only;
};
partition@a0000 {
label = "firmware";
reg = <0xa0000 0xf20000>;
};
partition@fc0000 {
label = "sysconfig";
reg = <0xfc0000 0x40000>;
};
partition@0x1000000 {
label = "rootfs_data";
reg = <0x1000000 0x1000000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 3 0>;
};
etop@E180000 {
phy-mode = "rmii";
};
pci@E105400 {
status = "okay";
};
};
};