openwrtv4/target/linux/brcm63xx/dts/bcm6362.dtsi
Jonas Gorski a3384088a2 brcm63xx: add uart nodes
Now that we can register uarts through device-tree, add them to the dtsi
files.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-12-16 12:57:05 +01:00

294 lines
5.6 KiB
Text

/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm6362";
aliases {
pinctrl = &pinctrl;
serial0 = &uart0;
serial1 = &uart1;
spi0 = &lsspi;
spi1 = &hsspi;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <1>;
};
};
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
memory { device_type = "memory"; reg = <0 0>; };
ubus@10000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
interrupt-parent = <&periph_intc>;
ext_intc: interrupt-controller@10000018 {
compatible = "brcm,bcm6345-ext-intc";
reg = <0x10000018 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <40>, <41>, <42>, <43>;
};
periph_intc: interrupt-controller@10000020 {
compatible = "brcm,bcm6345-l1-intc";
reg = <0x10000020 0x10>,
<0x10000030 0x10>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>;
};
pinctrl: pin-controller@10000080 {
compatible = "brcm,bcm6362-pinctrl";
reg = <0x10000080 0x8>,
<0x10000088 0x8>,
<0x10000090 0x4>,
<0x10000098 0x4>,
<0x1000009c 0x4>,
<0x100000b8 0x4>;
reg-names = "dirout", "dat", "led",
"mode", "ctrl", "basemode";
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&ext_intc>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
interrupt-names = "gpio24", "gpio25",
"gpio26", "gpio27";
pinctrl_usb_device_led: usb_device_led {
function = "usb_device_led";
pins = "gpio0";
};
pinctrl_sys_irq: sys_irq {
function = "sys_irq";
pins = "gpio1";
};
pinctrl_serial_led: serial_led {
pinctrl_serial_led_clk: serial_led_clk {
function = "serial_led_clk";
pins = "gpio2";
};
pinctrl_serial_led_data: serial_led_data {
function = "serial_led_data";
pins = "gpio3";
};
};
pinctrl_robosw_led_data: robosw_led_data {
function = "robosw_led_data";
pins = "gpio4";
};
pinctrl_robosw_led_clk: robosw_led_clk {
function = "robosw_led_clk";
pins = "gpio5";
};
pinctrl_robosw_led0: robosw_led0 {
function = "robosw_led0";
pins = "gpio6";
};
pinctrl_robosw_led1: robosw_led1 {
function = "robosw_led1";
pins = "gpio7";
};
pinctrl_inet_led: inet_led {
function = "inet_led";
pins = "gpio8";
};
pinctrl_spi_cs2: spi_cs2 {
function = "spi_cs2";
pins = "gpio9";
};
pinctrl_spi_cs3: spi_cs3 {
function = "spi_cs3";
pins = "gpio10";
};
pinctrl_ntr_pulse: ntr_pulse {
function = "ntr_pulse";
pins = "gpio11";
};
pinctrl_uart1_scts: uart1_scts {
function = "uart1_scts";
pins = "gpio12";
};
pinctrl_uart1_srts: uart1_srts {
function = "uart1_srts";
pins = "gpio13";
};
pinctrl_uart1: uart1 {
pinctrl_uart1_sdin: uart1_sdin {
function = "uart1_sdin";
pins = "gpio14";
};
pinctrl_uart1_sdout: uart1_sdout {
function = "uart1_sdout";
pins = "gpio15";
};
};
pinctrl_adsl_spi: adsl_spi {
pinctrl_adsl_spi_miso: adsl_spi_miso {
function = "adsl_spi_miso";
pins = "gpio16";
};
pinctrl_adsl_spi_mosi: adsl_spi_mosi {
function = "adsl_spi_mosi";
pins = "gpio17";
};
pinctrl_adsl_spi_clk: adsl_spi_clk {
function = "adsl_spi_clk";
pins = "gpio18";
};
pinctrl_adsl_spi_cs: adsl_spi_cs {
function = "adsl_spi_cs";
pins = "gpio19";
};
};
pinctrl_ephy0_led: ephy0_led {
function = "ephy0_led";
pins = "gpio20";
};
pinctrl_ephy1_led: ephy1_led {
function = "ephy1_led";
pins = "gpio21";
};
pinctrl_ephy2_led: ephy2_led {
function = "ephy2_led";
pins = "gpio22";
};
pinctrl_ephy3_led: ephy3_led {
function = "ephy3_led";
pins = "gpio23";
};
pinctrl_ext_irq0: ext_irq0 {
function = "ext_irq0";
pins = "gpio24";
};
pinctrl_ext_irq1: ext_irq1 {
function = "ext_irq1";
pins = "gpio25";
};
pinctrl_ext_irq2: ext_irq2 {
function = "ext_irq2";
pins = "gpio26";
};
pinctrl_ext_irq3: ext_irq3 {
function = "ext_irq3";
pins = "gpio27";
};
pinctrl_nand: nand {
function = "nand";
group = "nand_grp";
};
};
uart0: serial@10000100 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000100 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <3>;
/* clocks = <&periph_clk>; */
/* clock-names = "refclk"; */
status = "disabled";
};
uart1: serial@10000120 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000120 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <4>;
/* clocks = <&periph_clk>; */
/* clock-names = "refclk"; */
status = "disabled";
};
lsspi: spi@10000800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6358-spi";
reg = <0x10000800 0x70c>;
interrupts = <2>;
/* clocks = <&clkctl 15>; */
};
hsspi: spi@10001000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6328-hsspi";
reg = <0x10001000 0x600>;
interrupts = <5>;
/* clocks = <&clkctl 16>; */
};
leds: led-controller@10001900 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6328-leds";
reg = <0x10001900 0x24>;
status = "disabled";
};
};
};