openwrtv4/target/linux/ramips/base-files/etc/uci-defaults/network
Gabor Juhos b0449ccf04 ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

SVN-Revision: 31557
2012-05-02 19:17:59 +00:00

168 lines
3.2 KiB
Bash
Executable file

#!/bin/sh
. /etc/functions.sh
. /lib/ramips.sh
. /lib/functions/uci-defaults.sh
if [ ! -x /usr/sbin/maccalc ]; then
echo "$0: maccalc not found!"
return
fi
ramips_setup_interfaces()
{
local board="$1"
ucidef_set_interface_loopback
case $board in
all0256n | \
wl-330n)
ucidef_set_interface_lan "eth0.1"
;;
argus-atp52b | \
b2c | \
nw718 | \
sl-r7205 | \
w502u | \
wr6202)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
f5d8235-v1 | \
f5d8235-v2 | \
ur-336un)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
v11st-fe)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
ucidef_add_switch_vlan "switch0" "2" "0 5t"
;;
rt-n15 | \
wl-351)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
ucidef_add_switch_vlan "switch0" "2" "4 5t"
;;
rt-n56u)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
ucidef_add_switch_vlan "switch0" "2" "4 8t"
;;
freestation5 | \
wcr-150gn)
ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
;;
wli-tx4-ag300n)
ucidef_set_interface_lan "eth0"
;;
*)
RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
if [ -n "${RT3X5X}" ]; then
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
else
ucidef_set_interfaces_lan_wan "eth0" "eth1"
fi
;;
esac
}
ramips_setup_macs()
{
local board="$1"
local lan_mac=""
local wan_mac=""
case $board in
all0256n)
lan_mac=$(ramips_get_mac_binary factory 40)
;;
argus-atp52b | \
b2c | \
f5d8235-v1 | \
nw718 | \
rt-n15 | \
sl-r7205 | \
wl-351)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
w306r-v20)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 5)
;;
dir-300-b1 |\
dir-300-b2 |\
dir-600-b1)
lan_mac=$(ramips_get_mac_binary devdata 16388)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
esr-9753 | \
ur-336un)
lan_mac=$(ramips_get_mac_binary devdata 16388)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
nbg-419n | \
wcr-150gn)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(ramips_get_mac_binary factory 40)
;;
f5d8235-v2)
lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
rt-n56u)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(ramips_get_mac_binary factory 32772)
;;
w502u)
lan_mac=$(ramips_get_mac_binary factory 40)
wan_mac=$(ramips_get_mac_binary factory 46)
;;
wl341v3)
lan_mac=$(ramips_get_mac_binary board-nvram 65440)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
wli-tx4-ag300n)
lan_mac=$(ramips_get_mac_binary factory 4)
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
}
[ -e /etc/config/network ] && exit 0
touch /etc/config/network
board=$(ramips_board_name)
ramips_setup_interfaces $board
ramips_setup_macs $board
uci commit network
exit 0