openwrtv4/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch
Roman Yeryomin 156f2df879 ipq806x: ipq4019: add ap-dk01.1-c1 board support
AP-DK01.1-C1 is QCA dev board with:
- ipq4018 quad core ARM @716.8MHz, 2x2 dual (11n+11ac) radio
- 256MB RAM
- 32MB SPI flash
- QCA8075 multiport ethernet phy (WAN port, 4x LAN ports)

First installation via u-boot:
sf probe
sf erase 0x180000 0x1a00000
tftpboot 0x84000000 lede-ipq806x-AP-DK01.1-C1-squashfs-sysupgrade.bin
sf write 0x84000000 0x180000 $filesize

Further upgrades via sysupgrade.

Changes:
- add partitions
- set memory size to 256MB
- add reserved memory mapping
- add correct compatible string
- add image generation
- extract pre-cal data from ART partition

Compile and run tested.
Wirespeed NAT can be achieved with spreading rx interrupts over different
cores. Wifi speed is ~550Mbps @5GHz in open air.

Note:
AP-DK01.1-C1 is fully compatible with AP-DK01.2-C1, which has
ipq4028 instead of ipq4018 on board.

Changes since v2:
- based on dts(i) rework/cleanup submitted:
  http://lists.infradead.org/pipermail/lede-dev/2017-October/009596.html
- precise reserved memory mapping
- more precise description
- compatible string

Signed-off-by: Roman Yeryomin <roman@advem.lv>
2017-10-30 01:24:26 +02:00

115 lines
2 KiB
Diff

--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -19,4 +19,112 @@
/ {
model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+
+ apps_bl@87000000 {
+ reg = <0x87000000 0x400000>;
+ no-map;
+ };
+
+ sbl@87400000 {
+ reg = <0x87400000 0x100000>;
+ no-map;
+ };
+
+ cnss_debug@87500000 {
+ reg = <0x87500000 0x600000>;
+ no-map;
+ };
+
+ cpu_context_dump@87b00000 {
+ reg = <0x87b00000 0x080000>;
+ no-map;
+ };
+
+ tz_apps@87b80000 {
+ reg = <0x87b80000 0x280000>;
+ no-map;
+ };
+
+ smem@87e00000 {
+ reg = <0x87e00000 0x080000>;
+ no-map;
+ };
+
+ tz@87e80000 {
+ reg = <0x87e80000 0x180000>;
+ no-map;
+ };
+ };
+};
+
+&spi_0 {
+ mx25l25635f@0 {
+ compatible = "mx25l25635f", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+ MIBIB@40000 {
+ label = "MIBIB";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+ QSEE@60000 {
+ label = "QSEE";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+ CDT@c0000 {
+ label = "CDT";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+ DDRPARAMS@d0000 {
+ label = "DDRPARAMS";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+ APPSBLENV@e0000 {
+ label = "APPSBLENV";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+ APPSBL@f0000 {
+ label = "APPSBL";
+ reg = <0xf0000 0x80000>;
+ read-only;
+ };
+ ART@170000 {
+ label = "ART";
+ reg = <0x170000 0x10000>;
+ read-only;
+ };
+ kernel@180000 {
+ label = "kernel";
+ reg = <0x180000 0x400000>;
+ };
+ rootfs@580000 {
+ label = "rootfs";
+ reg = <0x580000 0x1600000>;
+ };
+ firmware@180000 {
+ label = "firmware";
+ reg = <0x180000 0x1a00000>;
+ };
+ };
};