KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/package/network/services/hostapd/Makefile
Hauke Mehrtens 3f38356893 packages: prefer http over git for git protocol 
In company networks everything except the http and https protocol is
often causes problems, because the network administrators try to block
everything else. To make it easier to use LEDE in company networks use
the https/http protocol for git access when possible.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-22 19:32:06 +02:00

445 lines
12 KiB
Makefile
Raw Blame History

# Copyright (C) 2006-2014 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=hostapd
PKG_VERSION:=2016-06-15
PKG_RELEASE:=1
PKG_REV:=31d3692fe5d56c05753ed4a70c7943979e1d29e7
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:=http://w1.fi/hostap.git
PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
PKG_SOURCE_VERSION:=$(PKG_REV)
PKG_SOURCE_PROTO:=git
# PKG_MIRROR_MD5SUM:=4e7c1f97edd7514535056fce54ae053a
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
PKG_LICENSE:=BSD-3-Clause
PKG_BUILD_PARALLEL:=1
PKG_CONFIG_DEPENDS:= \
CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK \
CONFIG_PACKAGE_kmod-ath9k \
CONFIG_PACKAGE_kmod-cfg80211 \
CONFIG_PACKAGE_hostapd \
CONFIG_PACKAGE_hostapd-mini \
CONFIG_PACKAGE_kmod-hostap \
CONFIG_WPA_RFKILL_SUPPORT \
CONFIG_DRIVER_WEXT_SUPPORT \
CONFIG_DRIVER_11N_SUPPORT
LOCAL_TYPE=$(strip \
$(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \
$(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \
hostapd \
)))
LOCAL_VARIANT=$(patsubst wpad-%,%,$(patsubst supplicant-%,%,$(BUILD_VARIANT)))
CONFIG_VARIANT:=$(LOCAL_VARIANT)
ifeq ($(LOCAL_VARIANT),mesh)
CONFIG_VARIANT:=full
endif
ifeq ($(LOCAL_TYPE),supplicant)
ifeq ($(LOCAL_VARIANT),full)
PKG_CONFIG_DEPENDS += \
CONFIG_WPA_SUPPLICANT_INTERNAL \
CONFIG_WPA_SUPPLICANT_OPENSSL
endif
endif
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
include $(INCLUDE_DIR)/package.mk
STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(CONFIG_WPA_MSG_MIN_PRIORITY)
ifneq ($(CONFIG_DRIVER_11N_SUPPORT),)
HOSTAPD_IEEE80211N:=y
endif
DRIVER_MAKEOPTS= \
CONFIG_ACS=$(CONFIG_PACKAGE_kmod-cfg80211) \
CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-cfg80211) \
CONFIG_DRIVER_HOSTAP=$(CONFIG_PACKAGE_kmod-hostap) \
CONFIG_IEEE80211N=$(HOSTAPD_IEEE80211N) \
CONFIG_DRIVER_WEXT=$(CONFIG_DRIVER_WEXT_SUPPORT) \
ifeq ($(LOCAL_VARIANT),full)
DRIVER_MAKEOPTS += CONFIG_IEEE80211W=$(CONFIG_DRIVER_11W_SUPPORT)
endif
ifneq ($(LOCAL_TYPE),hostapd)
ifdef CONFIG_WPA_SUPPLICANT_OPENSSL
ifeq ($(LOCAL_VARIANT),full)
DRIVER_MAKEOPTS += CONFIG_TLS=openssl
TARGET_LDFLAGS += -lcrypto -lssl
endif
endif
ifeq ($(LOCAL_VARIANT),mesh)
DRIVER_MAKEOPTS += CONFIG_TLS=openssl CONFIG_AP=y CONFIG_SAE=y CONFIG_MESH=y
TARGET_LDFLAGS += -lcrypto -lssl
endif
ifdef CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
TARGET_CFLAGS += -DNO_TIMESTAMP_CHECK
endif
ifdef CONFIG_WPA_RFKILL_SUPPORT
DRIVER_MAKEOPTS += NEED_RFKILL=y
endif
DRIVER_MAKEOPTS += \
CONFIG_DRIVER_ROBOSWITCH=$(CONFIG_PACKAGE_kmod-switch)
endif
ifdef CONFIG_USE_GLIBC
TARGET_LDFLAGS += -lrt
TARGET_LDFLAGS_C += -lrt
endif
DRV_DEPENDS:=+PACKAGE_kmod-cfg80211:libnl-tiny
define Package/hostapd/Default
SECTION:=net
CATEGORY:=Network
TITLE:=IEEE 802.1x Authenticator
URL:=http://hostap.epitest.fi/
DEPENDS:=$(DRV_DEPENDS) +hostapd-common +libubus
endef
define Package/hostapd
$(call Package/hostapd/Default)
TITLE+= (full)
VARIANT:=full
CONFLICTS:=wpad wpad-mini wpad-mesh
endef
define Package/hostapd/description
This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
Authenticator.
endef
define Package/hostapd-mini
$(call Package/hostapd/Default)
TITLE+= (WPA-PSK only)
VARIANT:=mini
CONFLICTS:=wpad wpad-mini wpad-mesh
endef
define Package/hostapd-mini/description
This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only).
endef
define Package/hostapd-utils
$(call Package/hostapd/Default)
TITLE+= (utils)
DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini||PACKAGE_wpad||PACKAGE_wpad-mesh||PACKAGE_wpad-mini
endef
define Package/hostapd-utils/description
This package contains a command line utility to control the
IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
endef
define Package/wpad/Default
SECTION:=net
CATEGORY:=Network
TITLE:=IEEE 802.1x Authenticator/Supplicant
DEPENDS:=$(DRV_DEPENDS) +hostapd-common +libubus
URL:=http://hostap.epitest.fi/
endef
define Package/wpad
$(call Package/wpad/Default)
TITLE+= (full)
DEPENDS+=+WPA_SUPPLICANT_OPENSSL:libopenssl
VARIANT:=wpad-full
endef
define Package/wpad/description
This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
Authenticator and Supplicant
endef
define Package/wpad-mini
$(call Package/wpad/Default)
TITLE+= (WPA-PSK only)
VARIANT:=wpad-mini
endef
define Package/wpad-mini/description
This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only).
endef
define Package/wpad-mesh
$(call Package/wpad/Default)
TITLE+= (with 802.11s mesh and SAE support)
DEPENDS:=$(DRV_DEPENDS) +libubus +PACKAGE_wpad-mesh:libopenssl @(!TARGET_uml||BROKEN)
VARIANT:=wpad-mesh
endef
define Package/wpad-mesh/description
This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (with 802.11s mesh and SAE support).
endef
define Package/wpa-supplicant
SECTION:=net
CATEGORY:=Network
TITLE:=WPA Supplicant
URL:=http://hostap.epitest.fi/wpa_supplicant/
DEPENDS:=$(DRV_DEPENDS) +WPA_SUPPLICANT_OPENSSL:libopenssl
CONFLICTS:=wpad wpad-mini wpad-mesh
VARIANT:=supplicant-full
endef
define Package/wpa-supplicant/Description
WPA Supplicant
endef
define Package/wpa-supplicant/config
source "$(SOURCE)/Config.in"
endef
define Package/wpa-supplicant-p2p
$(Package/wpa-supplicant)
TITLE:=WPA Supplicant (with Wi-Fi P2P support)
DEPENDS:=$(DRV_DEPENDS)
CONFLICTS:=wpad wpad-mini wpad-mesh
VARIANT:=supplicant-p2p
endef
define Package/wpa-supplicant-p2p/Description
WPA Supplicant (with Wi-Fi P2P support)
endef
define Package/wpa-supplicant-mesh
$(Package/wpa-supplicant)
TITLE:=WPA Supplicant (with 802.11s and SAE)
DEPENDS:=$(DRV_DEPENDS) @(!TARGET_uml||BROKEN)
CONFLICTS:=wpad wpad-mesh wpad-mesh
VARIANT:=supplicant-mesh
endef
define Package/wpa-supplicant-mesh/Description
WPA Supplicant (variant with 802.11s and SAE support)
endef
define Package/wpa-supplicant-mini
$(Package/wpa-supplicant)
TITLE:=WPA Supplicant (minimal version)
DEPENDS:=$(DRV_DEPENDS)
CONFLICTS:=wpad wpad-mini wpad-mesh
VARIANT:=supplicant-mini
endef
define Package/wpa-supplicant-mini/Description
WPA Supplicant (minimal version)
endef
define Package/wpa-cli
SECTION:=net
CATEGORY:=Network
DEPENDS:=@PACKAGE_wpa-supplicant||PACKAGE_wpa-supplicant-p2p||PACKAGE_wpad-mini||PACKAGE_wpad||PACKAGE_wpad-mesh
TITLE:=WPA Supplicant command line interface
endef
define Package/wpa-cli/Description
WPA Supplicant control utility
endef
define Package/hostapd-common
TITLE:=hostapd/wpa_supplicant common support files
SECTION:=net
CATEGORY:=Network
endef
define Package/hostapd-common-old
TITLE:=hostapd/wpa_supplicant common support files (legacy drivers)
SECTION:=net
CATEGORY:=Network
endef
define Package/eapol-test
TITLE:=802.1x authentication test utility
SECTION:=net
CATEGORY:=Network
VARIANT:=supplicant-full
DEPENDS:=$(DRV_DEPENDS)
endef
ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED)))
define Build/Configure/rebuild
$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f
rm -f $(PKG_BUILD_DIR)/hostapd/hostapd
rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant
rm -f $(PKG_BUILD_DIR)/.config_*
touch $(subst .configured_,.config_,$(STAMP_CONFIGURED))
endef
endif
define Build/Configure
$(Build/Configure/rebuild)
$(if $(wildcard ./files/hostapd-$(CONFIG_VARIANT).config), \
$(CP) ./files/hostapd-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config \
)
$(CP) ./files/wpa_supplicant-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config
endef
TARGET_CPPFLAGS := \
-I$(STAGING_DIR)/usr/include/libnl-tiny \
-I$(PKG_BUILD_DIR)/src/crypto \
$(TARGET_CPPFLAGS) \
-DCONFIG_LIBNL20 \
-D_GNU_SOURCE \
$(if $(CONFIG_WPA_MSG_MIN_PRIORITY),-DCONFIG_MSG_MIN_PRIORITY=$(CONFIG_WPA_MSG_MIN_PRIORITY))
TARGET_CFLAGS += -ffunction-sections -fdata-sections
TARGET_LDFLAGS += -Wl,--gc-sections
ifeq ($(findstring supplicant,$(BUILD_VARIANT)),)
TARGET_LDFLAGS += -lubox -lubus
endif
ifdef CONFIG_PACKAGE_kmod-cfg80211
TARGET_LDFLAGS += -lm -lnl-tiny
endif
define Build/RunMake
CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR)/$(1) \
$(TARGET_CONFIGURE_OPTS) \
$(DRIVER_MAKEOPTS) \
LIBS="$(TARGET_LDFLAGS)" \
LIBS_c="$(TARGET_LDFLAGS_C)" \
BCHECK= \
$(2)
endef
define Build/Compile/wpad
echo ` \
$(call Build/RunMake,hostapd,-s MULTICALL=1 dump_cflags); \
$(call Build/RunMake,wpa_supplicant,-s MULTICALL=1 dump_cflags) | \
sed -e 's,-n ,,g' -e 's^$(TARGET_CFLAGS)^^' \
` > $(PKG_BUILD_DIR)/.cflags
+$(call Build/RunMake,hostapd, \
CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
MULTICALL=1 \
hostapd_cli hostapd_multi.a \
)
+$(call Build/RunMake,wpa_supplicant, \
CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
MULTICALL=1 \
wpa_cli wpa_supplicant_multi.a \
)
$(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \
$(TARGET_CFLAGS) \
./files/multicall.c \
$(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \
$(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \
$(TARGET_LDFLAGS)
endef
define Build/Compile/hostapd
$(call Build/RunMake,hostapd, \
hostapd hostapd_cli \
)
endef
define Build/Compile/supplicant
$(call Build/RunMake,wpa_supplicant, \
wpa_cli wpa_supplicant \
)
endef
define Build/Compile/supplicant-full
$(call Build/RunMake,wpa_supplicant, \
eapol_test \
)
endef
define Build/Compile
$(Build/Compile/$(LOCAL_TYPE))
$(Build/Compile/$(BUILD_VARIANT))
endef
define Install/hostapd
$(INSTALL_DIR) $(1)/usr/sbin
endef
define Install/supplicant
$(INSTALL_DIR) $(1)/usr/sbin
endef
define Package/hostapd-common/install
$(INSTALL_DIR) $(1)/lib/netifd
$(INSTALL_DATA) ./files/netifd.sh $(1)/lib/netifd/hostapd.sh
endef
define Package/hostapd-common-old/install
$(INSTALL_DIR) $(1)/lib/wifi
$(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh
$(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh
endef
define Package/hostapd/install
$(call Install/hostapd,$(1))
$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
endef
Package/hostapd-mini/install = $(Package/hostapd/install)
ifneq ($(LOCAL_TYPE),supplicant)
define Package/hostapd-utils/install
$(INSTALL_DIR) $(1)/usr/sbin $(1)/etc/rc.button
$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
$(INSTALL_BIN) ./files/wps-hotplug.sh $(1)/etc/rc.button/wps
endef
endif
define Package/wpad/install
$(call Install/hostapd,$(1))
$(call Install/supplicant,$(1))
$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/
$(LN) wpad $(1)/usr/sbin/hostapd
$(LN) wpad $(1)/usr/sbin/wpa_supplicant
endef
Package/wpad-mini/install = $(Package/wpad/install)
Package/wpad-mesh/install = $(Package/wpad/install)
define Package/wpa-supplicant/install
$(call Install/supplicant,$(1))
$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/
endef
Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install)
Package/wpa-supplicant-p2p/install = $(Package/wpa-supplicant/install)
ifneq ($(LOCAL_TYPE),hostapd)
define Package/wpa-cli/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/
endef
endif
ifeq ($(BUILD_VARIANT),supplicant-full)
define Package/eapol-test/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
endef
endif
$(eval $(call BuildPackage,hostapd))
$(eval $(call BuildPackage,hostapd-mini))
$(eval $(call BuildPackage,wpad))
$(eval $(call BuildPackage,wpad-mesh))
$(eval $(call BuildPackage,wpad-mini))
$(eval $(call BuildPackage,wpa-supplicant))
$(eval $(call BuildPackage,wpa-supplicant-mesh))
$(eval $(call BuildPackage,wpa-supplicant-mini))
$(eval $(call BuildPackage,wpa-supplicant-p2p))
$(eval $(call BuildPackage,wpa-cli))
$(eval $(call BuildPackage,hostapd-utils))
$(eval $(call BuildPackage,hostapd-common))
$(eval $(call BuildPackage,hostapd-common-old))
$(eval $(call BuildPackage,eapol-test))
Reference in a new issue View git blame Copy permalink