openwrtv4/target/linux/lantiq/dts/DGN3500.dtsi
Andreas Eberlein eba84bee4c lantiq: Sanitize device tree files
The device tree file of ARV752DPW uses numbers/hex values for gpio states and input event codes.

This cleans it up and uses the available macros from header files. This way the functions are easier to read and comprehend.

Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
[sanitize all device tree files]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-19 19:55:04 +02:00

202 lines
3.6 KiB
Text

#include "ar9.dtsi"
/ {
chosen {
bootargs = "root= console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &internet;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
pci-in {
lantiq,groups = "req1";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1";
lantiq,output = <1>;
lantiq,pull = <0>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mac-address = [ 00 11 22 33 44 55 ];
};
ifxhcd@E101000 {
status = "okay";
};
pci@E105400 {
status = "okay";
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0x1>; /* GNT1 */
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0xf000>;
ath,pci-slot = <14>;
ath,eep-endian;
ath,eep-swap;
};
rtl8366rb {
compatible = "rtl8366rb";
gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
internet: internet {
label = "dgn3500:green:internet";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
/*
internet red is missing
*/
dsl: dsl {
label = "dgn3500:green:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "dgn3500:green:usb";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
power_green: power {
label = "dgn3500:green:power";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power2 {
label = "dgn3500:red:power";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
};
/*
power amber is missing
*/
wifi: wifi {
label = "dgn3500:blue:wireless";
gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
};
wps {
label = "dgn3500:green:wps";
gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
status = "ok";
m25p80@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x10000>;
label = "uboot";
read-only;
};
partition@10000 {
reg = <0x10000 0x10000>;
label = "uboot-env";
read-only;
};
ath9k_cal: partition@20000 {
reg = <0x20000 0x10000>;
label = "calibration";
read-only;
};
partition@50000 {
reg = <0x50000 0xfa0000>;
label = "firmware";
};
};
};
};