openwrtv4/target/linux/brcm2708/patches-4.4/0357-rtc-ds1307-ensure-that-any-pending-alarm-is-cleared-.patch
Álvaro Fernández Rojas 3fc661a98c brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y
Also alphabetically order sound-soc kernel packages.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-08 21:23:21 +02:00

58 lines
1.9 KiB
Diff

From 0d311e4c6e701192c62668665ae1ba25d2219f28 Mon Sep 17 00:00:00 2001
From: Nicolas Boullis <nboullis@debian.org>
Date: Sun, 10 Apr 2016 13:23:05 +0200
Subject: [PATCH 357/381] rtc: ds1307: ensure that any pending alarm is cleared
before a new alarm is enabled
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
If a previously-set alarm was disabled and then triggered, it may still
be pending when a new alarm is configured.
Then, if the alarm is enabled before the pending alarm is cleared, then
an interrupt is immediately raised.
Unfortunately, when the alarm is cleared and enabled during the same I²C
block write, the chip (at least the DS1339 I have) considers that the
alarm is enabled before it is cleared, and raises an interrupt.
This patch ensures that the pending alarm is cleared before the alarm is
enabled.
Signed-off-by: Nicolas Boullis <nboullis@debian.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
drivers/rtc/rtc-ds1307.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -540,12 +540,8 @@ static int ds1337_set_alarm(struct devic
buf[5] = 0;
buf[6] = 0;
- /* optionally enable ALARM1 */
+ /* disable alarms */
buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
- if (t->enabled) {
- dev_dbg(dev, "alarm IRQ armed\n");
- buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
- }
buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
ret = ds1307->write_block_data(client,
@@ -555,6 +551,13 @@ static int ds1337_set_alarm(struct devic
return ret;
}
+ /* optionally enable ALARM1 */
+ if (t->enabled) {
+ dev_dbg(dev, "alarm IRQ armed\n");
+ buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
+ i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, buf[7]);
+ }
+
return 0;
}