openwrtv4/target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch
Luka Perkov 3af779eb17 mvebu: backport mainline patches from kernel 3.12
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.11, and Linux v3.12.
This work mainly covers:

* Ground work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c)
  between the PXA family,and the Armada family.
* Further updates to the mvebu MBus.
* Work and ground work for enabling MSI on the Armada family.
* some phy / mdio bus initialization related work.
* Device tree binding documentation update.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39565
2014-02-11 02:07:41 +00:00

200 lines
5.3 KiB
Diff

From 45d36da3f284cd424b0ac2060cfccc17f9979552 Mon Sep 17 00:00:00 2001
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Mon, 12 Aug 2013 14:14:54 -0300
Subject: [PATCH 121/203] mtd: nand: pxa3xx: Remove unneeded internal cmdset
Use the defined macros for NAND command instead of using a constant
internal structure. This commit is only a cleanup, there's no
functionality modification.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 63 ++++++++-------------------
include/linux/platform_data/mtd-nand-pxa3xx.h | 13 ------
2 files changed, 17 insertions(+), 59 deletions(-)
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -131,7 +131,6 @@ enum pxa3xx_nand_variant {
struct pxa3xx_nand_host {
struct nand_chip chip;
- struct pxa3xx_nand_cmdset *cmdset;
struct mtd_info *mtd;
void *info_data;
@@ -205,23 +204,6 @@ static bool use_dma = 1;
module_param(use_dma, bool, 0444);
MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
-/*
- * Default NAND flash controller configuration setup by the
- * bootloader. This configuration is used only when pdata->keep_config is set
- */
-static struct pxa3xx_nand_cmdset default_cmdset = {
- .read1 = 0x3000,
- .read2 = 0x0050,
- .program = 0x1080,
- .read_status = 0x0070,
- .read_id = 0x0090,
- .erase = 0xD060,
- .reset = 0x00FF,
- .lock = 0x002A,
- .unlock = 0x2423,
- .lock_status = 0x007A,
-};
-
static struct pxa3xx_nand_timing timing[] = {
{ 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
{ 10, 0, 20, 40, 30, 40, 11123, 110, 10, },
@@ -530,7 +512,6 @@ static inline int is_buf_blank(uint8_t *
static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
uint16_t column, int page_addr)
{
- uint16_t cmd;
int addr_cycle, exec_cmd;
struct pxa3xx_nand_host *host;
struct mtd_info *mtd;
@@ -580,21 +561,17 @@ static int prepare_command_pool(struct p
switch (command) {
case NAND_CMD_READOOB:
case NAND_CMD_READ0:
- cmd = host->cmdset->read1;
+ info->buf_start = column;
+ info->ndcb0 |= NDCB0_CMD_TYPE(0)
+ | addr_cycle
+ | NAND_CMD_READ0;
+
if (command == NAND_CMD_READOOB)
- info->buf_start = mtd->writesize + column;
- else
- info->buf_start = column;
+ info->buf_start += mtd->writesize;
- if (unlikely(host->page_size < PAGE_CHUNK_SIZE))
- info->ndcb0 |= NDCB0_CMD_TYPE(0)
- | addr_cycle
- | (cmd & NDCB0_CMD1_MASK);
- else
- info->ndcb0 |= NDCB0_CMD_TYPE(0)
- | NDCB0_DBC
- | addr_cycle
- | cmd;
+ /* Second command setting for large pages */
+ if (host->page_size >= PAGE_CHUNK_SIZE)
+ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
case NAND_CMD_SEQIN:
/* small page addr setting */
@@ -625,62 +602,58 @@ static int prepare_command_pool(struct p
break;
}
- cmd = host->cmdset->program;
info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
| NDCB0_AUTO_RS
| NDCB0_ST_ROW_EN
| NDCB0_DBC
- | cmd
+ | (NAND_CMD_PAGEPROG << 8)
+ | NAND_CMD_SEQIN
| addr_cycle;
break;
case NAND_CMD_PARAM:
- cmd = NAND_CMD_PARAM;
info->buf_count = 256;
info->ndcb0 |= NDCB0_CMD_TYPE(0)
| NDCB0_ADDR_CYC(1)
| NDCB0_LEN_OVRD
- | cmd;
+ | command;
info->ndcb1 = (column & 0xFF);
info->ndcb3 = 256;
info->data_size = 256;
break;
case NAND_CMD_READID:
- cmd = host->cmdset->read_id;
info->buf_count = host->read_id_bytes;
info->ndcb0 |= NDCB0_CMD_TYPE(3)
| NDCB0_ADDR_CYC(1)
- | cmd;
+ | command;
info->ndcb1 = (column & 0xFF);
info->data_size = 8;
break;
case NAND_CMD_STATUS:
- cmd = host->cmdset->read_status;
info->buf_count = 1;
info->ndcb0 |= NDCB0_CMD_TYPE(4)
| NDCB0_ADDR_CYC(1)
- | cmd;
+ | command;
info->data_size = 8;
break;
case NAND_CMD_ERASE1:
- cmd = host->cmdset->erase;
info->ndcb0 |= NDCB0_CMD_TYPE(2)
| NDCB0_AUTO_RS
| NDCB0_ADDR_CYC(3)
| NDCB0_DBC
- | cmd;
+ | (NAND_CMD_ERASE2 << 8)
+ | NAND_CMD_ERASE1;
info->ndcb1 = page_addr;
info->ndcb2 = 0;
break;
case NAND_CMD_RESET:
- cmd = host->cmdset->reset;
info->ndcb0 |= NDCB0_CMD_TYPE(5)
- | cmd;
+ | command;
break;
@@ -876,7 +849,6 @@ static int pxa3xx_nand_config_flash(stru
}
/* calculate flash information */
- host->cmdset = &default_cmdset;
host->page_size = f->page_size;
host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
@@ -922,7 +894,6 @@ static int pxa3xx_nand_detect_config(str
}
host->reg_ndcr = ndcr & ~NDCR_INT_MASK;
- host->cmdset = &default_cmdset;
host->ndtr0cs0 = nand_readl(info, NDTR0CS0);
host->ndtr1cs0 = nand_readl(info, NDTR1CS0);
--- a/include/linux/platform_data/mtd-nand-pxa3xx.h
+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
@@ -16,19 +16,6 @@ struct pxa3xx_nand_timing {
unsigned int tAR; /* ND_ALE low to ND_nRE low delay */
};
-struct pxa3xx_nand_cmdset {
- uint16_t read1;
- uint16_t read2;
- uint16_t program;
- uint16_t read_status;
- uint16_t read_id;
- uint16_t erase;
- uint16_t reset;
- uint16_t lock;
- uint16_t unlock;
- uint16_t lock_status;
-};
-
struct pxa3xx_nand_flash {
char *name;
uint32_t chip_id;