openwrtv4/target/linux/ramips/base-files/etc/diag.sh
Henryk Heisig 39e9bfb181 ramips: add support for TP-Link TL-MR3420 v5
TP-Link TL-MR3420 v5 are simple N300 router with
5-port FE switch and non-detachable antennas.
Its very similar to TP-Link TL-WR841N V13.

Specification:

- MT7628N/N (580 MHz)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- USB 2.0 Port
- UART (J1) header on PCB (115200 8n1)
- 8x LED, 2x button, power input switch

Flash instruction:

The only way to flash LEDE image in mr3420v5 is to use
tftp recovery mode in U-Boot:

1. Configure PC with static IP 192.168.0.225/24 and tftp server.
2. Rename "lede-ramips-mt7628-tplink_tl-mr3420-v5-squashfs-tftp-recovery.bin"
   to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with one of LAN ports, press the reset button, power up
   the router and keep button pressed for around 6-7 seconds, until
   device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2017-12-23 15:35:52 +01:00

339 lines
5 KiB
Bash

#!/bin/sh
# Copyright (C) 2010-2013 OpenWrt.org
. /lib/functions.sh
. /lib/functions/leds.sh
get_status_led() {
board=$(board_name)
boardname="${board##*,}"
case $board in
3g150b|\
3g300m|\
w150m)
status_led="$boardname:blue:ap"
;;
3g-6200n|\
ar670w|\
ar725w|\
br-6475nd|\
c50|\
dch-m225|\
dir-860l-b1|\
e1700|\
ex2700|\
ex3700|\
fonera20n|\
hg255d|\
kn|\
kn_rc|\
kn_rf|\
kng_rc|\
mzk-750dhp|\
mzk-dp150n|\
mzk-w300nh2|\
nbg-419n|\
nbg-419n2|\
pwh2004|\
r6220|\
tplink,tl-mr3420-v5|\
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13|\
vr500|\
wnce2001|\
wndr3700v5|\
x5|\
x8|\
xdxrn502j|\
wn3000rpv3)
status_led="$boardname:green:power"
;;
3g-6200nl)
status_led="$boardname:green:internet"
;;
a5-v11|\
cs-qr10|\
d105|\
dcs-930l-b1|\
hlk-rm04|\
jhr-n825r|\
mpr-a1|\
mpr-a2|\
mzk-ex750np)
status_led="$boardname:red:power"
;;
ai-br100|\
ht-tm02)
status_led="$boardname:blue:wlan"
;;
all0239-3g|\
dcs-930|\
dir-300-b1|\
dir-300-b7|\
dir-320-b1|\
dir-600-b1|\
dir-610-a1|\
dir-615-d|\
dir-615-h1|\
dir-620-a1|\
dir-620-d1|\
dwr-512-b|\
gb-pc1|\
hpm|\
hw550-3g|\
mac1200rv2|\
miniembwifi|\
mofi3500-3gn|\
rut5xx|\
v11st-fe|\
wmr-300|\
zbt-wg2626)
status_led="$boardname:green:status"
;;
asl26555-8M|\
asl26555-16M)
status_led="asl26555:green:power"
;;
atp-52b|\
ew1200|\
ip2202)
status_led="$boardname:green:run"
;;
awapn2403|\
dir-645|\
sk-wb8|\
wrh-300cr)
status_led="$boardname:green:wps"
;;
c108)
status_led="$boardname:green:lan"
;;
cf-wr800n|\
psg1208)
status_led="$boardname:white:wps"
;;
psg1218a|\
psg1218b)
status_led="$boardname:yellow:status"
;;
cy-swr1100|\
w502u)
status_led="$boardname:blue:wps"
;;
c20|\
d240|\
dap-1350|\
na930|\
d-team,newifi-d2|\
pbr-m1|\
re350-v1|\
rt-ac51u|\
rt-n13u|\
rt-n14u|\
rt-n15|\
rt-n56u|\
wl-330n|\
wl-330n3g|\
wli-tx4-ag300n|\
y1|\
y1s|\
youku-yk1)
status_led="$boardname:blue:power"
;;
db-wrt01|\
esr-9753|\
pbr-d1)
status_led="$boardname:orange:power"
;;
f5d8235-v1)
status_led="$boardname:blue:wired"
;;
f5d8235-v2)
status_led="$boardname:blue:router"
;;
f7c027|\
timecloud)
status_led="$boardname:orange:status"
;;
hc5*61|\
hc5661a|\
jhr-n805r|\
jhr-n926r|\
mlw221|\
mlwg2|\
vonets,var11n-300)
status_led="$boardname:blue:system"
;;
hc5962)
status_led="$boardname:white:status"
;;
k2p|\
m3|\
miwifi-nano)
status_led="$boardname:blue:status"
;;
linkits7688)
[ "$1" = "upgrade" ] && status_led="mediatek:orange:wifi"
;;
m2m)
status_led="$boardname:blue:wifi"
;;
gl-mt300n-v2)
status_led="$boardname:red:wlan"
;;
m4-4M|\
m4-8M)
status_led="m4:blue:status"
;;
mir3g)
status_led="$boardname:yellow:status"
;;
miwifi-mini|\
zte-q7)
status_led="$boardname:red:status"
;;
mr-102n)
status_led="$boardname:amber:status"
;;
mr200)
status_led="$boardname:white:power"
;;
nw718)
status_led="$boardname:amber:cpu"
;;
newifi-d1)
status_led="$boardname:blue:status"
;;
omega2| \
omega2p)
status_led="$boardname:amber:system"
;;
oy-0001|\
sl-r7205)
status_led="$boardname:green:wifi"
;;
psr-680w)
status_led="$boardname:red:wan"
;;
px-4885-4M|\
px-4885-8M)
status_led="px-4885:orange:wifi"
;;
re6500|\
whr-1166d|\
whr-600d|\
widora-neo)
status_led="$boardname:orange:wifi"
;;
mzk-ex300np|\
rt-n10-plus|\
tew-638apb-v2|\
tew-691gr|\
tew-692gr|\
ur-326n4g|\
ur-336un|\
wf-2881)
status_led="$boardname:green:wps"
;;
rb750gr3)
status_led="$boardname:blue:pwr"
;;
sap-g3200u3)
status_led="$boardname:green:usb"
;;
u25awf-h1)
status_led="u25awf:red:wifi"
;;
u7621-06-256M-16M)
status_led="u7621-06:green:status"
;;
u7628-01-128M-16M)
status_led="u7628-01:green:power"
;;
v22rw-2x2)
status_led="$boardname:green:security"
;;
vocore-8M|\
vocore-16M)
status_led="vocore:green:status"
;;
vocore2)
status_led="$boardname:fuchsia:status"
;;
vocore2lite)
status_led="$boardname:green:status"
;;
w306r-v20|\
witi|\
zbt-wr8305rt)
status_led="$boardname:green:sys"
;;
wcr-1166ds|\
whr-300hp2|\
wsr-1166|\
wsr-600)
status_led="$boardname:green:power"
;;
wcr-150gn|\
wl-351)
status_led="$boardname:amber:power"
;;
whr-g300n|\
wlr-6000|\
zbt-we2026)
status_led="$boardname:red:power"
;;
wzr-agl300nh)
status_led="$boardname:green:router"
;;
wizfi630a)
status_led="$boardname::run"
;;
wr512-3gn-4M|\
wr512-3gn-8M)
status_led="wr512-3gn:green:wps"
;;
wrtnode2r | \
wrtnode2p | \
wrtnode)
status_led="wrtnode:blue:indicator"
;;
wt3020-4M|\
wt3020-8M)
status_led="wt3020:blue:power"
;;
zbt-cpe102)
status_led="$boardname:green:4g-0"
;;
zbt-we826-16M|\
zbt-we826-32M)
status_led="zbt-we826:green:power"
;;
zbt-wg3526-16M|\
zbt-wg3526-32M)
status_led="zbt-wg3526:green:status"
;;
esac
}
set_state() {
get_status_led $1
case "$1" in
preinit)
status_led_blink_preinit
;;
failsafe)
status_led_blink_failsafe
;;
upgrade | \
preinit_regular)
status_led_blink_preinit_regular
;;
done)
status_led_on
;;
esac
}