fd62fa752b
This patch adds supports for the WNR2000v1 board with 4MB flash, and produces device-specific factory, rootfs, and sysupgrade files for the WNR2000v1. This board is errorneously claimed as supported on the OpenWRT wiki as AP81, but AP81 image would not work because of APT81 image requiring having 8MB of flash, while WNR2000v1 has only 4MB. The image requires the u-boot bootloader to be modified to fuhry's bootloader first. Short specification: - CPU: Atheros AR9132 - 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps - 4 MB of Flash - 32 MB of RAM - UART header (J1) on board - 1x button Factory/Initial flash instructions: - Set up a TFTP server on your local machine. - Download the uImage for ar71xx-generic and the rootfs image for ar71xx-generic-wnr2000 and save in the tftp server root. - Gain serial access to the router via the UART port (telnetenable over the network only won't work!). - Upgrade the u-boot bootloader to fuhry's version by running the script: http://fuhry.com/b/wnr2000/install-repart.sh - When the router restarts, interrupt u-boot and gain access to u-boot command line. - Repartititon the board and flash initial uImage and rootfs as follow. Commands to type in u-boot: # tells u-boot that we have a tftp server on 192.168.1.10 setenv serverip 192.168.1.10 # tells u-boot that the router should take the address 192.168.1.1 setenv ipaddr 192.168.1.1 # erase the region from 0x050000-0x3f0000 erase 0xbf050000 +0x3A0000 # loads sqfs.bin on TFTP server, and put it to memory address 0x81000000 tftpboot 0x81000000 sqfs.bin # it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ # copy bit by bit 0xZZZZZZ bytes from offset 0x050000 cp.b 0x81000000 0xbf050000 0xZZZZZZ # same to the uImage.bin, write it right next to sqfs.bin # again, 0xYYYYYY is the length that tftpboot reports tftpboot 0x81000000 uImage.bin cp.b 0x81000000 0xbf2a0000 0xYYYYYY # We need to tell the kernel what board it is booting into, and where to find the partitions setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd" # Tell u-boot where to find the uImage setenv bootcmd "bootm 0xbf2a0000" # Tell u-boot to save parameters to the u-boot-env partitions saveenv # Reset the board reset Tested on: - WNR2000v1 board. - Initial flash works. Known bugs: - I don't know why factory image doesn't work on initial flash on stock firmware in u-boot recovery mode while it should. - Sysupgrade does not yet work, if you do -f it will mess up your installation (requiring a reinstall of sqfs and uImage). Signed-off-by: Huan Truong <htruong@tnhh.net>
1067 lines
53 KiB
Makefile
1067 lines
53 KiB
Makefile
rootfs_type=$(patsubst squashfs-%,squashfs,$(1))
|
|
|
|
# $(1): rootfs type.
|
|
# $(2): board name.
|
|
define imgname
|
|
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1))
|
|
endef
|
|
|
|
define rootfs_align
|
|
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
|
|
endef
|
|
|
|
define sysupname
|
|
$(call imgname,$(1),$(2))-sysupgrade.bin
|
|
endef
|
|
|
|
define factoryname
|
|
$(call imgname,$(1),$(2))-factory.bin
|
|
endef
|
|
|
|
COMMA:=,
|
|
|
|
define mkcmdline
|
|
$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3))
|
|
endef
|
|
|
|
define mtdpartsize
|
|
$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024)))
|
|
endef
|
|
|
|
# $(1) : name of image build method to be used, e.g., AthLzma.
|
|
# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc.
|
|
# $(3) : name of the profile to be defined.
|
|
# $(4) : board name.
|
|
# $(5)~$(7) : arguments for $(mkcmdline)
|
|
# board=$(1) console=$(2),$(3)
|
|
# $(8)~$(14): extra arguments.
|
|
define SingleProfile
|
|
# $(1): action name, e.g. loader, buildkernel, squashfs, etc.
|
|
define Image/Build/Profile/$(3)
|
|
$$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14))
|
|
endef
|
|
endef
|
|
|
|
LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR)
|
|
|
|
VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
|
|
UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
|
|
|
|
# $(1): input file.
|
|
# $(2): output file.
|
|
# $(3): extra arguments for lzma.
|
|
define CompressLzma
|
|
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2)
|
|
endef
|
|
|
|
define PatchKernel
|
|
cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
|
|
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
|
|
endef
|
|
|
|
define PatchKernel/initramfs
|
|
$(call PatchKernel,$(1),$(2),-initramfs)
|
|
cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin
|
|
endef
|
|
|
|
# $(1): board name.
|
|
# $(2): kernel command line.
|
|
# $(3): extra argumetns for lzma.
|
|
# $(4): name suffix, e.g. "-initramfs".
|
|
define PatchKernelLzma
|
|
cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1)
|
|
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))"
|
|
$(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3))
|
|
endef
|
|
|
|
define PatchKernelGzip
|
|
cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
|
|
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
|
|
gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz
|
|
endef
|
|
|
|
ifneq ($(SUBTARGET),mikrotik)
|
|
# $(1): compression method of the data.
|
|
# $(2): extra arguments.
|
|
# $(3): input data file.
|
|
# $(4): output file.
|
|
define MkuImage
|
|
mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
|
|
-e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
|
|
-d $(3) $(4)
|
|
endef
|
|
|
|
# $(1): board name.
|
|
# $(2): kernel command line.
|
|
# $(3): extra arguments for lzma.
|
|
# $(4): name suffix, e.g. "-initramfs".
|
|
# $(5): extra arguments for mkimage.
|
|
define MkuImageLzma
|
|
$(call PatchKernelLzma,$(1),$(2),$(3),$(4))
|
|
$(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
|
|
endef
|
|
|
|
define MkuImageLzma/initramfs
|
|
$(call PatchKernelLzma,$(1),$(2),$(3),-initramfs)
|
|
$(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin)
|
|
endef
|
|
|
|
define MkuImageGzip
|
|
$(call PatchKernelGzip,$(1),$(2))
|
|
$(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage)
|
|
endef
|
|
|
|
define MkuImageGzip/initramfs
|
|
$(call PatchKernelGzip,$(1),$(2),-initramfs)
|
|
$(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin)
|
|
endef
|
|
|
|
define MkuImageOKLI
|
|
$(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli)
|
|
endef
|
|
endif
|
|
|
|
# $(1): name of the 1st file.
|
|
# $(2): size limit of the 1st file if it is greater than 262144, or
|
|
# the erase size of the flash if it is greater than zero and less
|
|
# than 262144
|
|
# $(3): name of the 2nd file.
|
|
# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise
|
|
# it is the size limit of the output file
|
|
# $(5): name of the output file.
|
|
# $(6): padding size.
|
|
define CatFiles
|
|
if [ $(2) -eq 0 ]; then \
|
|
filename="$(3)"; fstype=$${filename##*\.}; \
|
|
case "$${fstype}" in \
|
|
*) bs=`stat -c%s $(1)`;; \
|
|
esac; \
|
|
( dd if=$(1) bs=$${bs} conv=sync; cat $(3) ) > $(5); \
|
|
if [ -n "$(6)" ]; then \
|
|
case "$${fstype}" in \
|
|
squashfs*) \
|
|
padjffs2 $(5) $(6); \
|
|
;; \
|
|
esac; \
|
|
fi; \
|
|
if [ `stat -c%s $(5)` -gt $(4) ]; then \
|
|
echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
|
|
rm -f $(5); \
|
|
fi; \
|
|
else if [ $(2) -gt 262144 ]; then \
|
|
if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
|
|
echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \
|
|
else if [ `stat -c%s $(3)` -gt $(4) ]; then \
|
|
echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \
|
|
else \
|
|
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
|
|
fi; fi; \
|
|
else \
|
|
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
|
|
if [ `stat -c%s $(5)` -gt $(4) ]; then \
|
|
echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
|
|
rm -f $(5); \
|
|
fi; \
|
|
fi; fi
|
|
endef
|
|
|
|
# $(1): rootfs type.
|
|
# $(2): board name.
|
|
# $(3): kernel image size limit.
|
|
# $(4): rootfs image size limit.
|
|
# $(5): padding argument for padjffs2.
|
|
Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5)))
|
|
Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5))
|
|
Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2)))
|
|
|
|
# $(1): ubinize ini file
|
|
# $(2): working directory
|
|
# $(3): output file
|
|
# $(4): physical erase block size
|
|
# $(5): minimum I/O unit size
|
|
# $(6): custom options
|
|
define ubinize
|
|
$(CP) $(1) $(2)
|
|
( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1))
|
|
endef
|
|
|
|
#
|
|
# Embed lzma-compressed kernel inside lzma-loader.
|
|
#
|
|
# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
|
|
# $(2), suffix of target file to build, e.g. bin, gz, elf
|
|
# $(3), kernel command line to pass from lzma-loader to kernel
|
|
# $(4), unused here
|
|
# $(5), suffix of kernel filename, e.g. -initramfs, or empty
|
|
define Image/BuildLoader
|
|
-rm -rf $(KDIR)/lzma-loader
|
|
$(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\
|
|
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
|
|
LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \
|
|
compile loader.$(2)
|
|
-$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
|
|
endef
|
|
|
|
#
|
|
# Build lzma-loader alone which will search for lzma-compressed kernel identified by
|
|
# uImage header with magic "OKLI" at boot time.
|
|
#
|
|
# $(4), offset into the flash space to start searching uImage magic "OKLI".
|
|
# $(5), size of search range starting at $(4). With 0 as the value, uImage
|
|
# header is expected to be at precisely $(4)
|
|
define Image/BuildLoaderAlone
|
|
-rm -rf $(KDIR)/lzma-loader
|
|
$(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \
|
|
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
|
|
BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \
|
|
compile loader.$(2)
|
|
endef
|
|
|
|
define Build/Clean
|
|
$(LOADER_MAKE) clean
|
|
endef
|
|
|
|
alfa_ap120c_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,13312k(rootfs),1536k(kernel),1152k(unknown)ro,64k(art)ro;spi0.1:-(unknown)
|
|
alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware)
|
|
alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
|
|
alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
|
|
all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)ro
|
|
all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro
|
|
ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware)
|
|
ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
|
|
ap121_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,10944k(rootfs),4992k(kernel),64k(nvram),64k(art)ro,15936k@0x50000(firmware)
|
|
ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art)ro,7808k@0x50000(firmware)
|
|
ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
|
|
ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware)
|
|
ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware)
|
|
ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
|
|
ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
|
|
ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
|
|
bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro
|
|
cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
|
|
cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
|
|
cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
|
|
cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
|
|
cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware)
|
|
cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro
|
|
cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
|
|
cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
|
|
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art)ro,13632k@0xa0000(firmware)
|
|
eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
|
|
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
|
|
dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
|
|
dlan_hotspot_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(Config1)ro,64k(Config2)ro,7872k@0x40000(firmware),64k(art)ro
|
|
dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k@0x70000(firmware),64k(art)ro
|
|
dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k@0x70000(firmware),64k(art)ro
|
|
cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
|
|
cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
|
|
esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
|
|
esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
|
|
epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
|
|
ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmware),64k(art)ro
|
|
ew-dorin_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware)
|
|
dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
|
|
dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
|
|
planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
|
|
ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
|
|
uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
|
|
ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
|
|
whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
|
|
wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware)
|
|
wpj342_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
|
|
wpj344_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
|
|
dr344_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
|
|
wpj531_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
|
|
wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
|
|
wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware)
|
|
wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
|
|
wnr2000_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
|
|
wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
|
|
wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
|
|
r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata)ro,256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter)
|
|
tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
|
|
wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
|
|
zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
|
|
mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
|
|
zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
|
|
yun_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6464k(rootfs),1280k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
|
|
yun_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14656k(rootfs),1280k(kernel),64k(nvram),64k(art)ro,15936k@0x50000(firmware)
|
|
wrtnode2q_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,1472k(kernel),14592k(rootfs),16064k@0x50000(firmware),16384k@0x0(fullflash)
|
|
|
|
define Image/BuildKernel
|
|
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
|
|
cp $(KDIR)/vmlinux $(VMLINUX).bin
|
|
dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
|
|
$(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
|
|
cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf
|
|
-mkdir -p $(KDIR_TMP)
|
|
endef
|
|
|
|
define Image/BuildKernel/Initramfs
|
|
cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf
|
|
cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin
|
|
dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync
|
|
$(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin)
|
|
cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf
|
|
$(call Image/Build/Initramfs)
|
|
endef
|
|
|
|
Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3))
|
|
|
|
define Image/Build/WRT400N
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
|
|
define Image/Build/CameoAP94/buildkernel
|
|
$(call MkuImageLzma,$(2),$(3) $(4))
|
|
$(call MkuImageLzma,$(2)-fat,$(3) $(5))
|
|
endef
|
|
|
|
define Image/Build/CameoAP94
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval fwsize_fat=$(call mtdpartsize,firmware,$(5)))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
( \
|
|
dd if=$(call sysupname,$(1),$(2)); \
|
|
echo -n "$(6)"; \
|
|
) > $(call imgname,$(1),$(2))-backup-loader.bin; \
|
|
if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \
|
|
echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \
|
|
else \
|
|
( \
|
|
dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \
|
|
echo -n "$(7)"; \
|
|
) > $(call factoryname,$(1),$(2)); \
|
|
fi; \
|
|
fi
|
|
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64)
|
|
if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \
|
|
echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \
|
|
sh $(TOPDIR)/scripts/combined-image.sh \
|
|
"$(KDIR_TMP)/$(2)-fat.bin" \
|
|
"$(KDIR_TMP)/$(2)-fat.dummy" \
|
|
$(call sysupname,$(1),$(2)-fat); \
|
|
fi
|
|
endef
|
|
|
|
define Image/Build/WZRHP
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(3)-4*$(4)*1024)),$(4))
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
( \
|
|
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
|
|
dd if=$(call sysupname,$(1),$(2)); \
|
|
) > $(call imgname,$(1),$(2))-tftp.bin; \
|
|
buffalo-enc -p $(5) -v 1.99 \
|
|
-i $(call sysupname,$(1),$(2)) \
|
|
-o $(KDIR_TMP)/$(2).enc; \
|
|
buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
|
|
-w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
|
|
-i $(KDIR_TMP)/$(2).enc \
|
|
-o $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3))
|
|
Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4))
|
|
|
|
Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3))
|
|
Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4))
|
|
|
|
|
|
Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/WHRHPG300N
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
( \
|
|
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
|
|
dd if=$(call sysupname,$(1),$(2)); \
|
|
) > $(call imgname,$(1),$(2))-tftp.bin; \
|
|
buffalo-enc -p $(5) -v 1.99 \
|
|
-i $(call sysupname,$(1),$(2)) \
|
|
-o $(KDIR_TMP)/$(2).enc; \
|
|
buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
|
|
-w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
|
|
-i $(KDIR_TMP)/$(2).enc \
|
|
-o $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
|
|
define Image/Build/Cameo
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
factory_size=$$(($(fwsize) - $(6))); \
|
|
( \
|
|
dd if=$(call sysupname,$(1),$(2)) bs=$${factory_size} conv=sync; \
|
|
echo -n $(5); \
|
|
) > $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout))
|
|
Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536)
|
|
Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout))
|
|
|
|
Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout))
|
|
Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536)
|
|
Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout))
|
|
|
|
Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout))
|
|
Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
|
|
Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
|
|
|
|
Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
|
|
Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26)
|
|
Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
|
|
|
|
Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
|
|
Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout))
|
|
Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26)
|
|
Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout))
|
|
|
|
Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M))
|
|
Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26)
|
|
Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M))
|
|
|
|
define Image/Build/CameoHornet
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
for r in $(7); do \
|
|
[ -n "$$r" ] && dashr="-$$r" || dashr=; \
|
|
[ -z "$$r" ] && r="DEF"; \
|
|
mkcameofw -M HORNET -R "$$r" -S $(5) -V $(6) -c \
|
|
-K $(8) -I $(fwsize) \
|
|
-k "$(call sysupname,$(1),$(2))" \
|
|
-o $(call imgname,$(1),$(2))-factory$$dashr.bin; \
|
|
true; \
|
|
done; \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout))
|
|
Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000)
|
|
Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout))
|
|
|
|
Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
|
|
Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000)
|
|
Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
|
|
|
|
define Image/Build/dLAN
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
|
|
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
|
|
endef
|
|
|
|
Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
|
|
Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/Ath
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
|
|
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
|
|
endef
|
|
|
|
Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4))
|
|
Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
|
|
Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4))
|
|
|
|
Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
|
|
Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
|
|
Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/Belkin
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
|
|
$(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
edimax_fw_header -m $(5) -v "$(shell echo -n LEDE$(REVISION) | cut -c -13)" \
|
|
-n "uImage" \
|
|
-i $(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
-o $(KDIR_TMP)/$(2)-uImage; \
|
|
edimax_fw_header -m $(5) -v "$(shell echo -n LEDE$(REVISION) | cut -c -13)" \
|
|
-n "rootfs" \
|
|
-i $(KDIR)/root.$(1) \
|
|
-o $(KDIR_TMP)/$(2)-rootfs; \
|
|
( \
|
|
dd if=$(KDIR_TMP)/$(2)-rootfs; \
|
|
dd if=$(KDIR_TMP)/$(2)-uImage; \
|
|
) > "$(call factoryname,$(1),$(2))"; \
|
|
fi
|
|
endef
|
|
|
|
define Image/Build/EnGenius
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
|
|
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
mksenaofw -e $(call sysupname,$(1),$(2)) \
|
|
-o $(call imgname,$(1),$(2))-factory.dlf \
|
|
-r 0x101 -p $(7) -t 2; \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
|
|
Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3))
|
|
|
|
define Image/Build/PB4X
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
|
|
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync
|
|
dd if=$(KDIR)/root.$(1) \
|
|
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync
|
|
-sh $(TOPDIR)/scripts/combined-image.sh \
|
|
"$(call imgname,kernel,$(2)).bin" \
|
|
"$(call imgname,$(1),$(2)-rootfs).bin" \
|
|
$(call sysupname,$(1),$(2))
|
|
endef
|
|
|
|
|
|
Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3))
|
|
Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3))
|
|
|
|
define Image/Build/MyLoader
|
|
$(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024))))
|
|
$(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin)
|
|
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage))
|
|
if [ -e "$(fwimage)" ]; then \
|
|
$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \
|
|
-p0x00030000:0:al:0x80060000:firmware:$(fwimage) \
|
|
$(call imgname,$(1),$(2))-$(5)-factory.img; \
|
|
echo -n "" > $(KDIR_TMP)/empty.bin; \
|
|
sh $(TOPDIR)/scripts/combined-image.sh \
|
|
$(fwimage) $(KDIR_TMP)/empty.bin \
|
|
$(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout))
|
|
Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0)
|
|
|
|
define Image/Build/Planex/buildkernel
|
|
[ -e "$(KDIR)/loader-$(2).gz" ]
|
|
$(call MkuImageOKLI,$(2))
|
|
( \
|
|
dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \
|
|
) > $(KDIR_TMP)/kernel-$(2).bin
|
|
$(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage)
|
|
endef
|
|
|
|
define Image/Build/Planex
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout)))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
$(STAGING_DIR_HOST)/bin/mkplanexfw \
|
|
-B $(2) \
|
|
-v 2.00.00 \
|
|
-i $(call sysupname,$(1),$(2)) \
|
|
-o $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
|
|
Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/ALFA
|
|
$(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6))
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
rm -rf $(KDIR)/$(1); \
|
|
mkdir -p $(KDIR)/$(1); \
|
|
cd $(KDIR)/$(1); \
|
|
cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \
|
|
cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \
|
|
$(TAR) zcf $(call factoryname,$(1),$(2)) -C $(KDIR)/$(1) $(7) $(8); \
|
|
( \
|
|
echo WRM7222C | dd bs=32 count=1 conv=sync; \
|
|
echo -ne '\xfe'; \
|
|
) >> $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
|
|
Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/Senao
|
|
mkdir -p $(KDIR_TMP)/$(2)/
|
|
touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2)
|
|
-$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync
|
|
dd if=$(KDIR)/root.$(1) \
|
|
of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync
|
|
( \
|
|
cd $(KDIR_TMP)/$(2)/; \
|
|
$(TAR) -cz -f $(call factoryname,$(1),$(2)) * \
|
|
)
|
|
-rm -rf $(KDIR_TMP)/$(2)/
|
|
-sh $(TOPDIR)/scripts/combined-image.sh \
|
|
$(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
$(KDIR)/root.$(1) \
|
|
$(call sysupname,$(1),$(2))
|
|
endef
|
|
|
|
define Image/Build/CyberTAN
|
|
echo -n '' > $(KDIR_TMP)/empty.bin
|
|
-$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
|
|
-f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \
|
|
-x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \
|
|
$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \
|
|
-i $(KDIR)/image.tmp \
|
|
-o $(call sysupname,$(1),$(2))
|
|
-$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
-x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \
|
|
$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \
|
|
-i $(KDIR)/image.tmp \
|
|
-o $(call factoryname,$(1),$(2))
|
|
-rm $(KDIR)/image.tmp
|
|
endef
|
|
|
|
Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000)
|
|
Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage)
|
|
Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
|
|
|
|
Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
|
|
|
|
|
|
Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
|
|
|
|
define Image/Build/Netgear/buildkernel
|
|
$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
|
|
-rm -rf $(KDIR_TMP)/$(2)
|
|
mkdir -p $(KDIR_TMP)/$(2)/image
|
|
cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage
|
|
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
|
|
$(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \
|
|
-noappend -root-owned -be -b 65536 \
|
|
$(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
|
|
( \
|
|
cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \
|
|
dd if=/dev/zero bs=1k count=1 \
|
|
) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2
|
|
mkimage -A mips -O linux -T filesystem -C none -M $(5) \
|
|
-a 0xbf070000 -e 0xbf070000 \
|
|
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
|
|
-d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \
|
|
$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs
|
|
endef
|
|
|
|
define Image/Build/Netgear
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
|
|
if [ -e $(call sysupname,$(1),$(2)) ]; then \
|
|
for r in $(7) ; do \
|
|
[ -n "$$r" ] && dashr="-$$r" || dashr= ; \
|
|
$(STAGING_DIR_HOST)/bin/mkdniimg \
|
|
-B $(6) -v OpenWrt.$(REVISION) -r "$$r" $(8) \
|
|
-i $(call sysupname,$(1),$(2)) \
|
|
-o $(call imgname,$(1),$(2))-factory$$dashr.img; \
|
|
done; \
|
|
fi
|
|
if [ "$2" = "wnr2000" ]; then \
|
|
dd if=$(KDIR)/root.$(1) \
|
|
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
|
|
fi
|
|
endef
|
|
|
|
|
|
Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
|
|
Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
|
|
|
|
define Image/Build/NetgearLzma
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
|
|
endef
|
|
|
|
|
|
Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
|
|
|
|
# $(1): (empty)
|
|
# $(2): Board name (small caps)
|
|
# $(3): Kernel board specific cmdline
|
|
# $(4): Kernel mtdparts definition
|
|
# $(5): U-Boot magic
|
|
define Image/Build/NetgearNAND/buildkernel
|
|
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(call PatchKernelLzma,$(2),$(3) $(4),-d20)
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
|
|
of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \
|
|
bs=$$(($(kernelsize)-131072-2*64-1)) \
|
|
count=1 conv=sync
|
|
$(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage)
|
|
echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage
|
|
# create a fake rootfs image
|
|
dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1
|
|
mkimage -A mips -O linux -T filesystem -C none \
|
|
-a 0xbf070000 -e 0xbf070000 \
|
|
-n 'MIPS OpenWrt fakeroot' \
|
|
-d $(KDIR_TMP)/fakeroot-$(2) \
|
|
-M $(5) \
|
|
$(KDIR_TMP)/fakeroot-$(2).uImage
|
|
# append the fake rootfs image to the kernel, it will reside in the last
|
|
# erase block of the kernel partition
|
|
cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage
|
|
endef
|
|
|
|
|
|
# $(1): rootfs image suffix
|
|
# $(2): Board name (small caps)
|
|
# $(3): Kernel board specific cmdline
|
|
# $(4): Kernel mtdparts definition
|
|
# $(5): U-Boot magic
|
|
# $(6): Board name (upper caps)
|
|
# $(7): firmware region code (not used yet)
|
|
# $(8): DNI Hardware version
|
|
# $(9): suffix of the configuration file for ubinize
|
|
define Image/Build/NetgearNAND
|
|
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
|
|
$(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
|
|
echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
|
|
$(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
|
|
( \
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \
|
|
dd if=$(KDIR_TMP)/$(2)-root.ubi \
|
|
) > $(imageraw)
|
|
$(STAGING_DIR_HOST)/bin/mkdniimg \
|
|
-B $(6) -v OpenWrt.$(REVISION) -r "$$r" $(8) \
|
|
-i $(imageraw) \
|
|
-o $(call imgname,ubi,$(2))-factory.img
|
|
|
|
$(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage)
|
|
endef
|
|
|
|
|
|
ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh
|
|
Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3))
|
|
|
|
define Image/Build/ZyXEL
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
if [ ! -f $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin ]; then \
|
|
echo "Warning: $(IMG_PREFIX)-$(2)-u-boot.bin not found" >&2; \
|
|
else \
|
|
$(STAGING_DIR_HOST)/bin/mkzynfw \
|
|
-B $(4) \
|
|
-b $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin \
|
|
-r $(call sysupname,$(1),$(2)):0x10000 \
|
|
-o $(call factoryname,$(1),$(2)); \
|
|
fi; fi
|
|
endef
|
|
endif
|
|
|
|
define Image/Build/ZyXELNAND/buildkernel
|
|
$(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
|
|
$(call MkuImageLzma,$(2),$(3) $(5) $(6))
|
|
mkdir -p $(KDIR_TMP)/$(2)/image/boot
|
|
cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
|
|
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
|
|
--pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
|
|
-o $(KDIR_TMP)/$(2)-kernel.jffs2 \
|
|
-d $(KDIR_TMP)/$(2)/image \
|
|
2>&1 1>/dev/null | awk '/^.+$$/'
|
|
-rm -rf $(KDIR_TMP)/$(2)
|
|
endef
|
|
|
|
define Image/Build/ZyXELNAND
|
|
if [ "$(1)" != "squashfs" ]; then \
|
|
echo Only squashfs is supported; \
|
|
return 0; \
|
|
fi
|
|
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
|
|
$(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
|
|
$(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
|
|
( \
|
|
dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
|
|
dd if=$(KDIR_TMP)/$(2)-root.ubi \
|
|
) > $(imageraw)
|
|
dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
|
|
bs=128k conv=sync
|
|
$(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2)
|
|
endef
|
|
|
|
|
|
Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
|
|
Image/Build/OpenMesh/initramfs=$(call MkuImageLzma/initramfs,$(2),)
|
|
|
|
define Image/Build/OpenMesh
|
|
-sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
|
|
"$(4)" \
|
|
"$(BUILD_DIR)/fwupgrade.cfg-$(4)" \
|
|
"$(KDIR_TMP)/vmlinux-$(2).uImage" \
|
|
"$(KDIR)/root.$(1)"
|
|
-sh $(TOPDIR)/scripts/combined-ext-image.sh \
|
|
"$(4)" "$(call factoryname,$(1),$(2))" \
|
|
"$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \
|
|
"$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \
|
|
"$(KDIR)/root.$(1)" "rootfs"
|
|
if [ -e "$(call factoryname,$(1),$(2))" ]; then \
|
|
cp "$(call factoryname,$(1),$(2))" "$(call sysupname,$(1),$(2))"; \
|
|
fi
|
|
endef
|
|
|
|
|
|
Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/Zcomax
|
|
$(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
$(STAGING_DIR_HOST)/bin/mkzcfw \
|
|
-B $(2) \
|
|
-k $(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
-r $(KDIR)/root.$(1) \
|
|
-o $(call imgname,$(1),$(2))-factory.img; \
|
|
fi
|
|
endef
|
|
|
|
|
|
# $(1): template name to be defined.
|
|
# $(2): squashfs suffix to be used.
|
|
define BuildTemplate
|
|
# $(1) : name of build method.
|
|
# $(2) : board name.
|
|
# $(3) : kernel command line.
|
|
# $(4)~$(8): extra arguments.
|
|
define Image/Build/Template/$(1)/initramfs
|
|
$$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
|
|
endef
|
|
define Image/Build/Template/$(1)/loader
|
|
$$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
|
|
endef
|
|
define Image/Build/Template/$(1)/buildkernel
|
|
$$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
|
|
endef
|
|
define Image/Build/Template/$(1)/squashfs
|
|
$$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
|
|
endef
|
|
endef
|
|
|
|
$(eval $(call BuildTemplate,squashfs-only))
|
|
$(eval $(call BuildTemplate,64k,-64k))
|
|
$(eval $(call BuildTemplate,64kraw,-raw))
|
|
$(eval $(call BuildTemplate,64kraw-nojffs,-raw))
|
|
$(eval $(call BuildTemplate,128k))
|
|
$(eval $(call BuildTemplate,128kraw,-raw))
|
|
$(eval $(call BuildTemplate,256k))
|
|
$(eval $(call BuildTemplate,all))
|
|
|
|
ifeq ($(SUBTARGET),generic)
|
|
$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2))
|
|
$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image))
|
|
$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image))
|
|
|
|
$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage))
|
|
|
|
$(eval $(call SingleProfile,AthLzma,64k,ALFAAP120C,alfa-ap120c,ALFA-AP120C,ttyS0,115200,$$(alfa_ap120c_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP121_16M,ap121-16M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_16M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,EWDORINAP,ew-dorin,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,EWDORINRT,ew-dorin-router,EW-DORIN-ROUTER,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,EWDORIN16M,ew-dorin-16M,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,WPJ342_16M,wpj342-16M,WPJ342,ttyS0,115200,$$(wpj342_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,DR344,dr344,DR344,ttyS0,115200,$$(dr344_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,WRTNODE2Q,wrtnode2q,WRTNODE2Q,ttyS0,115200,$$(wrtnode2q_mtdlayout),KRuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,YUN_8M,yun-8M,Yun,ttyATH0,250000,$$(yun_mtdlayout_8M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,YUN_16M,yun-16M,Yun,ttyATH0,250000,$$(yun_mtdlayout_16M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,ZBTWE1526,zbt-we1526,ZBT-WE1526,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
|
|
|
|
$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
|
|
|
|
$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00"))
|
|
$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02"))
|
|
$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01"))
|
|
|
|
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
|
|
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
|
|
|
|
$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00"))
|
|
$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00"))
|
|
|
|
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
|
|
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
|
|
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
|
|
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05"))
|
|
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
|
|
|
|
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,""))
|
|
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
|
|
$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
|
|
|
|
$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00"))
|
|
$(eval $(call SingleProfile,CameoAP135,64kraw,TEW823DRU,tew-823dru,TEW-823DRU,ttyS0,115200,$$(tew823dru_mtdlayout) mem=256M,"00AP135AR9558-RT-131129-00"))
|
|
|
|
$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
|
|
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
|
|
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
|
|
|
|
$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA"))
|
|
|
|
$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01))
|
|
|
|
$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01))
|
|
|
|
$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
|
|
$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
|
|
$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
|
|
|
|
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_Hotspot,dlan-hotspot,dLAN-Hotspot,ttyATH0,115200,$$(dlan_hotspot_mtdlayout) mem=64M,KRuImage,65536))
|
|
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,65536))
|
|
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,65536))
|
|
|
|
$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
|
|
$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
|
|
$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71))
|
|
|
|
$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M))
|
|
$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M))
|
|
$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M))
|
|
$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M))
|
|
$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M))
|
|
$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M))
|
|
|
|
$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32))
|
|
$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,WNR2000,wnr2000,WNR2000,ttyS0,115200,$$(wnr2000_mtdlayout),0x32303031,WNR2000,"" NA,))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,wnr2200,"" NA,))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,"" NA,))
|
|
|
|
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P))
|
|
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P))
|
|
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5PAC,om5pac,,,,OM5PAC))
|
|
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600))
|
|
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900))
|
|
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750))
|
|
|
|
$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200))
|
|
|
|
$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200))
|
|
$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200))
|
|
|
|
$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
|
|
|
|
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
|
|
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
|
|
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))
|
|
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N))
|
|
|
|
$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200))
|
|
|
|
$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH))
|
|
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2))
|
|
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H))
|
|
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H))
|
|
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP))
|
|
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2))
|
|
|
|
$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout)))
|
|
$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout)))
|
|
|
|
$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
|
|
|
|
endif # ifeq ($(SUBTARGET),generic)
|
|
|
|
ifeq ($(SUBTARGET),nand)
|
|
|
|
$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300))
|
|
$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
|
|
$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300))
|
|
|
|
$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M))
|
|
|
|
endif # ifeq ($(SUBTARGET),nand)
|
|
|
|
define Image/Build/squashfs
|
|
cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw
|
|
cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k
|
|
$(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64
|
|
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
|
|
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
|
|
endef
|
|
|
|
define Image/Prepare
|
|
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
$(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma)
|
|
$(call Image/BuildLoader,generic,elf,,,-initramfs)
|
|
endif
|
|
$(call Image/BuildLoader,generic,elf)
|
|
endef
|
|
|
|
define Image/Prepare/Profile
|
|
$(call Image/Build/Profile/$(1),loader)
|
|
endef
|
|
|
|
define Image/Build/Profile
|
|
$(call Image/Build/Profile/$(1),buildkernel)
|
|
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(call Image/Build/Profile/$(1),initramfs))
|
|
$(call Image/Build/Profile/$(1),$(2))
|
|
endef
|
|
|
|
# $(1): filesystem type.
|
|
define Image/Build
|
|
$(call Image/Build/$(call rootfs_type,$(1)),$(1))
|
|
endef
|