4a9d726200
AR8337 supports a configuration bit to swap MAC0 and MAC6. Currently this is set in general if an AR8337 is detected and causes issues with devices using an AR8334 (internally an AR8337, just less chip pins). And it might even cause issues with AR8337-based devices with different board designs. Swapping the MAC's however isn't needed for AR8337 in general. It's just needed in case of certain board designs (affected devices seem to be based on Atheros reference board AP135/136-010). Therefore this configuration bit should be moved to platform data. The patch includes the needed changes to the device initialization code of affected devices. Hopefully I didn't miss any .. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 45970
177 lines
4.2 KiB
C
177 lines
4.2 KiB
C
/*
|
|
* EnGenius ESR1750 board support
|
|
*
|
|
* Copyright (c) 2014 Jon Suphammer <jon@suphammer.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "pci.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "nvram.h"
|
|
|
|
#define ESR1750_GPIO_LED_WLAN_5G 23
|
|
#define ESR1750_GPIO_LED_WLAN_2G 13
|
|
#define ESR1750_GPIO_LED_POWER_AMBER 2
|
|
#define ESR1750_GPIO_LED_WPS_AMBER 22
|
|
#define ESR1750_GPIO_LED_WPS_BLUE 19
|
|
|
|
#define ESR1750_GPIO_BTN_WPS 16
|
|
#define ESR1750_GPIO_BTN_RESET 17
|
|
|
|
#define ESR1750_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define ESR1750_KEYS_DEBOUNCE_INTERVAL (3 * ESR1750_KEYS_POLL_INTERVAL)
|
|
|
|
#define ESR1750_CALDATA_ADDR 0x1fff0000
|
|
#define ESR1750_WMAC_CALDATA_OFFSET 0x1000
|
|
#define ESR1750_PCIE_CALDATA_OFFSET 0x5000
|
|
|
|
#define ESR1750_NVRAM_ADDR 0x1f030000
|
|
#define ESR1750_NVRAM_SIZE 0x10000
|
|
|
|
static struct gpio_led esr1750_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "esr1750:amber:power",
|
|
.gpio = ESR1750_GPIO_LED_POWER_AMBER,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "esr1750:blue:wps",
|
|
.gpio = ESR1750_GPIO_LED_WPS_BLUE,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "esr1750:amber:wps",
|
|
.gpio = ESR1750_GPIO_LED_WPS_AMBER,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "esr1750:blue:wlan-2g",
|
|
.gpio = ESR1750_GPIO_LED_WLAN_2G,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "esr1750:blue:wlan-5g",
|
|
.gpio = ESR1750_GPIO_LED_WLAN_5G,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button esr1750_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "WPS button",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = ESR1750_GPIO_BTN_WPS,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = ESR1750_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct ar8327_pad_cfg esr1750_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_RGMII,
|
|
.txclk_delay_en = true,
|
|
.rxclk_delay_en = true,
|
|
.txclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
.mac06_exchange_en = true,
|
|
};
|
|
|
|
static struct ar8327_platform_data esr1750_ar8327_data = {
|
|
.pad0_cfg = &esr1750_ar8327_pad0_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
};
|
|
|
|
static struct mdio_board_info esr1750_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &esr1750_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static int esr1750_get_mac(const char *name, char *mac)
|
|
{
|
|
u8 *nvram = (u8 *) KSEG1ADDR(ESR1750_NVRAM_ADDR);
|
|
int err;
|
|
|
|
err = ath79_nvram_parse_mac_addr(nvram, ESR1750_NVRAM_SIZE,
|
|
name, mac);
|
|
if (err) {
|
|
pr_err("no MAC address found for %s\n", name);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void __init esr1750_setup(void)
|
|
{
|
|
u8 *caldata = (u8 *) KSEG1ADDR(ESR1750_CALDATA_ADDR);
|
|
u8 mac1[ETH_ALEN];
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(esr1750_leds_gpio),
|
|
esr1750_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, ESR1750_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(esr1750_gpio_keys),
|
|
esr1750_gpio_keys);
|
|
|
|
ath79_register_usb();
|
|
|
|
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
mdiobus_register_board_info(esr1750_mdio0_info,
|
|
ARRAY_SIZE(esr1750_mdio0_info));
|
|
|
|
/* GMAC0 is connected to an QCA8327N switch */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
|
|
if (esr1750_get_mac("ethaddr=", mac1))
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
|
|
|
|
ath79_eth0_pll_data.pll_1000 = 0xa6000000;
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_wmac(caldata + ESR1750_WMAC_CALDATA_OFFSET, mac1);
|
|
|
|
ath79_register_pci();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_ESR1750, "ESR1750",
|
|
"EnGenius ESR1750",
|
|
esr1750_setup);
|