openwrtv4/target/linux/ramips/dts/GB-PC1.dts
Alex Maclean 6031ab345d ramips: move partitions into partition table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-04 08:39:35 +02:00

128 lines
2 KiB
Text

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "gnubee,gb-pc1", "mediatek,mt7621-soc";
model = "GB-PC1";
aliases {
led-status = &led_status;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
};
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
system {
label = "gb-pc1:green:system";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
led_status: status {
label = "gb-pc1:green:status";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "gb-pc1:green:lan1";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "gb-pc1:green:lan2";
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
};
};
&sdhci {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sdhci_pins>;
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
};
&cpuclock {
compatible = "fixed-clock";
clock-frequency = <900000000>;
};
&pcie {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "jtag", "rgmii2", "uart3", "wdt";
ralink,function = "gpio";
};
};
};