openwrtv4/package
Dongming Han 04d3308b62 ipq806x: add support for GL.iNet GL-B1300
This patch adds support for GL.iNet GL-B1300

Specification:
- SOC:        IPQ4028 / QCA Dakota
- RAM:        256 MiB
- FLASH:      32 MiB
- ETH:        Qualcomm Atheros QCA8075 Gigabit Switch (2 x LAN, 1 x WAN)
- USB:        1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC)
- WLAN1:      Qualcomm Atheros QCA4028 2.4GHz 802.11bgn 2:2x2
- WLAN2:      Qualcomm Atheros QCA4028 5GHz 802.11a/n/ac 2:2x2
- INPUT:      one reset and one WPS button
- LEDS:       3 leds: Power, WIFI(only for 2.4G currently), and one reserved
- UART:       1 x UART on PCB (3.3V, TX, RX, GND) - 115200 8N1

Installation:
Method 1:
- use serial port to stop uboot
- uboot command: run lf
Method 2:
- push down reset button and power on
- wait until three leds constantly on then release
- upgrade by uboot web at http://192.168.1.1
Note:
- the sysupgrade image need to be renamed to lede-gl-b1300.bin in both method.
- the sysupgrade image can be automatically downloaded if tftp server at
  192.168.1.2 have that file.
- the wifi led will be flashing when writing image.

Signed-off-by: Dongming Han <handongming@gl-inet.com>
2018-02-14 09:40:32 +01:00
..
base-files base-files: don't evaluate block-device uevent 2018-02-13 00:01:44 +01:00
boot ar71xx: Add eTactica EG-200 support 2018-02-13 10:01:53 +01:00
devel valgrind: Fix compile on ARM64 2018-02-10 20:17:43 +01:00
firmware ipq806x: add support for GL.iNet GL-B1300 2018-02-14 09:40:32 +01:00
kernel mwlwifi: downgrade to version 10.3.4.0-20180118 2018-02-13 23:21:12 +01:00
libs bunwind: build for ARM64 2018-02-10 20:17:21 +01:00
network uqmi: bump package release 2018-02-13 10:25:30 +01:00
system ubox: update to latest git HEAD 2018-02-14 09:30:07 +01:00
utils build: add hardened builds with PIE (ASLR) support 2018-01-27 16:46:45 +01:00
Makefile build: remove package preconfig feature 2018-01-13 19:54:44 +01:00