KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/layerscape/patches-4.4/3028-dts-ls1043-update-dts-for-ls1043.patch
Yutang Jiang c6c731fe31 layerscape: add 64b/32b target for ls1043ardb device 
Add support for NXP layerscape ls1043ardb 64b/32b Dev board.

LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores.
ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC,
I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc.

64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from
NXP QorIQ SDK release.

All of 4.4 kernel patches porting from SDK release or upstream.

QorIQ SDK ISOs can be downloaded from this location:
http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00

523 lines
12 KiB
Diff
Raw Blame History

From ad6176d72132d020317db1496be1485056ac88d7 Mon Sep 17 00:00:00 2001
From: Liu Gang <Gang.Liu@nxp.com>
Date: Mon, 6 Jun 2016 15:46:00 +0800
Subject: [PATCH 28/70] dts/ls1043: update dts for ls1043
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 59 +++++
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 264 +++++++++++++++++++-
.../boot/dts/freescale/qoriq-qman1-portals.dtsi | 10 +-
3 files changed, 321 insertions(+), 12 deletions(-)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -50,6 +50,10 @@
/ {
model = "LS1043A RDB Board";
compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
+
+ aliases {
+ crypto = &crypto;
+ };
};
&i2c0 {
@@ -108,6 +112,35 @@
};
};
+&dspi0 {
+ bus-num = <0>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13", "jedec,spi-nor"; /* 16MB */
+ reg = <0>;
+ spi-max-frequency = <1000000>; /* input clock */
+ };
+
+ slic@2 {
+ compatible = "maxim,ds26522";
+ reg = <2>;
+ spi-max-frequency = <2000000>;
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <50>;
+ };
+
+ slic@3 {
+ compatible = "maxim,ds26522";
+ reg = <3>;
+ spi-max-frequency = <2000000>;
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <50>;
+ };
+};
+
&duart0 {
status = "okay";
};
@@ -176,7 +209,33 @@
mdio@fd000 {
aqr105_phy: ethernet-phy@c {
compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 132 4>;
reg = <0x1>;
};
};
};
+
+&uqe {
+ ucc_hdlc: ucc@2000 {
+ compatible = "fsl,ucc_hdlc";
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk9";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot = <0xfffffffe>;
+ fsl,rx-timeslot = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-mode = "normal";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ fsl,tdm-interface;
+ };
+
+ ucc_serial: ucc@2200 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ port-number = <0>;
+ rx-clock-name = "brg2";
+ tx-clock-name = "brg2";
+ };
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -44,6 +44,8 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/thermal/thermal.h>
+
/ {
compatible = "fsl,ls1043a";
interrupt-parent = <&gic>;
@@ -75,6 +77,7 @@
compatible = "arm,cortex-a53";
reg = <0x0>;
clocks = <&clockgen 1 0>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -118,6 +121,8 @@
<1 14 0x1>, /* Physical Non-Secure PPI */
<1 11 0x1>, /* Virtual PPI */
<1 10 0x1>; /* Hypervisor PPI */
+ arm,reread-timer;
+ fsl,erratum-a008585;
};
pmu {
@@ -162,11 +167,64 @@
big-endian;
};
+ crypto: crypto@1700000 {
+ compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+ "fsl,sec-v4.0";
+ fsl,sec-era = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x1700000 0x100000>;
+ reg = <0x00 0x1700000 0x0 0x100000>;
+ interrupts = <0 75 0x4>;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <0 71 0x4>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <0 72 0x4>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ interrupts = <0 73 0x4>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <0 74 0x4>;
+ };
+ };
+
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1043a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x10000>;
};
+ reset: reset@1EE00B0 {
+ compatible = "fsl,ls-reset";
+ reg = <0x0 0x1EE00B0 0x0 0x4>;
+ big-endian;
+ };
+
+ rcpm: rcpm@1ee2000 {
+ compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1";
+ reg = <0x0 0x1ee2000 0x0 0x10000>;
+ };
+
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
@@ -501,6 +559,82 @@
};
};
+ tmu: tmu@1f00000 {
+ compatible = "fsl,qoriq-tmu", "fsl,ls1043a-tmu";
+ reg = <0x0 0x1f00000 0x0 0x10000>;
+ interrupts = <0 33 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-calibration = <0x00000000 0x00000026
+ 0x00000001 0x0000002d
+ 0x00000002 0x00000032
+ 0x00000003 0x00000039
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000046
+ 0x00000006 0x0000004d
+ 0x00000007 0x00000054
+ 0x00000008 0x0000005a
+ 0x00000009 0x00000061
+ 0x0000000a 0x0000006a
+ 0x0000000b 0x00000071
+
+ 0x00010000 0x00000025
+ 0x00010001 0x0000002c
+ 0x00010002 0x00000035
+ 0x00010003 0x0000003d
+ 0x00010004 0x00000045
+ 0x00010005 0x0000004e
+ 0x00010006 0x00000057
+ 0x00010007 0x00000061
+ 0x00010008 0x0000006b
+ 0x00010009 0x00000076
+
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000049
+ 0x00020004 0x00000056
+ 0x00020005 0x00000061
+ 0x00020006 0x0000006d
+
+ 0x00030000 0x00000021
+ 0x00030001 0x0000002a
+ 0x00030002 0x0000003c
+ 0x00030003 0x0000004e>;
+ big-endian;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
dspi0: dspi@2100000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
@@ -527,6 +661,20 @@
status = "disabled";
};
+ qspi: quadspi@1550000 {
+ compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1550000 0x0 0x10000>,
+ <0x0 0x40000000 0x0 0x4000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 99 0x4>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ big-endian;
+ status = "disabled";
+ };
+
i2c0: i2c@2180000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
@@ -602,8 +750,8 @@
clocks = <&clockgen 4 0>;
};
- gpio1: gpio@2300000 {
- compatible = "fsl,ls1043a-gpio";
+ gpio0: gpio@2300000 {
+ compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <0 66 0x4>;
gpio-controller;
@@ -612,8 +760,8 @@
#interrupt-cells = <2>;
};
- gpio2: gpio@2310000 {
- compatible = "fsl,ls1043a-gpio";
+ gpio1: gpio@2310000 {
+ compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <0 67 0x4>;
gpio-controller;
@@ -622,8 +770,8 @@
#interrupt-cells = <2>;
};
- gpio3: gpio@2320000 {
- compatible = "fsl,ls1043a-gpio";
+ gpio2: gpio@2320000 {
+ compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <0 68 0x4>;
gpio-controller;
@@ -632,8 +780,8 @@
#interrupt-cells = <2>;
};
- gpio4: gpio@2330000 {
- compatible = "fsl,ls1043a-gpio";
+ gpio3: gpio@2330000 {
+ compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2330000 0x0 0x10000>;
interrupts = <0 134 0x4>;
gpio-controller;
@@ -642,6 +790,70 @@
#interrupt-cells = <2>;
};
+ uqe: uqe@2400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe", "simple-bus";
+ ranges = <0x0 0x0 0x2400000 0x40000>;
+ reg = <0x0 0x2400000 0x0 0x480>;
+ brg-frequency = <100000000>;
+ bus-frequency = <200000000>;
+
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: qeic@80 {
+ compatible = "fsl,qe-ic";
+ reg = <0x80 0x80>;
+ #address-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupts = <0 77 0x04 0 77 0x04>;
+ };
+
+ si1: si@700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,qe-si";
+ reg = <0x700 0x80>;
+ };
+
+ siram1: siram@1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+ };
+
lpuart0: serial@2950000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
@@ -696,6 +908,15 @@
status = "disabled";
};
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>;
+ interrupts = <0 86 0x4>;
+ big-endian;
+ rcpm-wakeup = <&rcpm 0x0 0x20000000>;
+ status = "okay";
+ };
+
wdog0: wdog@2ad0000 {
compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
@@ -726,6 +947,8 @@
reg = <0x0 0x2f00000 0x0 0x10000>;
interrupts = <0 60 0x4>;
dr_mode = "host";
+ configure-gfladj;
+ snps,dis_rxdet_inp3_quirk;
};
usb1: usb3@3000000 {
@@ -733,6 +956,8 @@
reg = <0x0 0x3000000 0x0 0x10000>;
interrupts = <0 61 0x4>;
dr_mode = "host";
+ configure-gfladj;
+ snps,dis_rxdet_inp3_quirk;
};
usb2: usb3@3100000 {
@@ -740,6 +965,8 @@
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <0 63 0x4>;
dr_mode = "host";
+ configure-gfladj;
+ snps,dis_rxdet_inp3_quirk;
};
sata: sata@3200000 {
@@ -749,6 +976,20 @@
clocks = <&clockgen 4 0>;
};
+ qdma: qdma@8380000 {
+ compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
+ reg = <0x0 0x838f000 0x0 0x11000 /* Controller regs */
+ 0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+ interrupts = <0 152 0x4>,
+ <0 39 0x4>;
+ interrupt-names = "qdma-error", "qdma-queue";
+ channels = <8>;
+ queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
msi1: msi-controller1@1571000 {
compatible = "fsl,1s1043a-msi";
reg = <0x0 0x1571000 0x0 0x4>,
@@ -787,6 +1028,7 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
+ dma-coherent;
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -811,6 +1053,7 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
+ dma-coherent;
num-lanes = <2>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -835,6 +1078,7 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
+ dma-coherent;
num-lanes = <2>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -897,8 +1141,8 @@
alignment = <0 0x1000000>;
};
qman_fqd: qman-fqd {
- size = <0 0x400000>;
- alignment = <0 0x400000>;
+ size = <0 0x800000>;
+ alignment = <0 0x800000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
--- a/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
@@ -132,5 +132,11 @@
compatible = "fsl,cgrid-range";
fsl,cgrid-range = <0 256>;
};
-
-};
\ No newline at end of file
+ qman-ceetm@0 {
+ compatible = "fsl,qman-ceetm";
+ fsl,ceetm-lfqid-range = <0xf00000 0x1000>;
+ fsl,ceetm-sp-range = <0 12>;
+ fsl,ceetm-lni-range = <0 8>;
+ fsl,ceetm-channel-range = <0 32>;
+ };
+};
Reference in a new issue View git blame Copy permalink