15a14cf166
The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
83 lines
2.9 KiB
Diff
83 lines
2.9 KiB
Diff
From d2d88e3432d68b11b0add84bd15a3aadaf44f1c1 Mon Sep 17 00:00:00 2001
|
|
From: Yunhui Cui <B56489@freescale.com>
|
|
Date: Mon, 28 Dec 2015 18:25:56 +0800
|
|
Subject: [PATCH 102/113] mtd: spi-nor: fsl-quadspi:Support qspi for ls2080a
|
|
|
|
There is a hardware feature that qspi_amba_base is added
|
|
internally by SOC design on ls2080a. So as to software, the driver
|
|
need support to the feature.
|
|
|
|
Signed-off-by: Yunhui Cui <B56489@freescale.com>
|
|
Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>
|
|
---
|
|
drivers/mtd/spi-nor/fsl-quadspi.c | 24 ++++++++++++++++++++++--
|
|
1 file changed, 22 insertions(+), 2 deletions(-)
|
|
|
|
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
|
|
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
|
|
@@ -41,6 +41,8 @@
|
|
#define QUADSPI_QUIRK_TKT253890 (1 << 2)
|
|
/* Controller cannot wake up from wait mode, TKT245618 */
|
|
#define QUADSPI_QUIRK_TKT245618 (1 << 3)
|
|
+/* QSPI_AMBA_BASE is internally added by SOC design */
|
|
+#define QUADSPI_AMBA_BASE_INTERNAL (0x10000)
|
|
|
|
/* The registers */
|
|
#define QUADSPI_MCR 0x00
|
|
@@ -217,6 +219,7 @@ enum fsl_qspi_devtype {
|
|
FSL_QUADSPI_IMX7D,
|
|
FSL_QUADSPI_IMX6UL,
|
|
FSL_QUADSPI_LS1021A,
|
|
+ FSL_QUADSPI_LS2080A,
|
|
};
|
|
|
|
struct fsl_qspi_devtype_data {
|
|
@@ -270,6 +273,14 @@ static struct fsl_qspi_devtype_data ls10
|
|
.driver_data = 0,
|
|
};
|
|
|
|
+static struct fsl_qspi_devtype_data ls2080a_data = {
|
|
+ .devtype = FSL_QUADSPI_LS2080A,
|
|
+ .rxfifo = 128,
|
|
+ .txfifo = 64,
|
|
+ .ahb_buf_size = 1024,
|
|
+ .driver_data = QUADSPI_AMBA_BASE_INTERNAL,
|
|
+};
|
|
+
|
|
#define FSL_QSPI_MAX_CHIP 4
|
|
struct fsl_qspi {
|
|
struct spi_nor nor[FSL_QSPI_MAX_CHIP];
|
|
@@ -312,6 +323,11 @@ static inline int needs_wakeup_wait_mode
|
|
return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT245618;
|
|
}
|
|
|
|
+static inline int has_added_amba_base_internal(struct fsl_qspi *q)
|
|
+{
|
|
+ return q->devtype_data->driver_data & QUADSPI_AMBA_BASE_INTERNAL;
|
|
+}
|
|
+
|
|
/*
|
|
* R/W functions for big- or little-endian registers:
|
|
* The qSPI controller's endian is independent of the CPU core's endian.
|
|
@@ -558,8 +574,11 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 c
|
|
/* save the reg */
|
|
reg = qspi_readl(q, base + QUADSPI_MCR);
|
|
|
|
- qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr,
|
|
- base + QUADSPI_SFAR);
|
|
+ if (has_added_amba_base_internal(q))
|
|
+ qspi_writel(q, q->chip_base_addr + addr, base + QUADSPI_SFAR);
|
|
+ else
|
|
+ qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr,
|
|
+ base + QUADSPI_SFAR);
|
|
qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
|
|
base + QUADSPI_RBCT);
|
|
qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
|
|
@@ -849,6 +868,7 @@ static const struct of_device_id fsl_qsp
|
|
{ .compatible = "fsl,imx7d-qspi", .data = (void *)&imx7d_data, },
|
|
{ .compatible = "fsl,imx6ul-qspi", .data = (void *)&imx6ul_data, },
|
|
{ .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, },
|
|
+ { .compatible = "fsl,ls2080a-qspi", .data = (void *)&ls2080a_data, },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
|