No description
Find a file
2011-10-25 11:25:51 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include linux: add 3.1 checksum 2011-10-24 12:58:44 +00:00
package mac80211: allow building ath9k_htc without PCI support, based on patch by Helmut Schaa <helmut.schaa@googlemail.com> 2011-10-25 11:25:51 +00:00
scripts scripts/feeds: override the OPENWRT_BUILD variable when calling internal targets (based on patch from #10212) 2011-10-21 13:03:37 +00:00
target ramips: Support for NexAira BC2 2011-10-24 21:49:36 +00:00
toolchain uclibc: backport upstream signalfd patch 2011-08-25 15:59:21 +00:00
tools tools/lzma-old fix compile issues (patch from #10253) 2011-10-21 12:52:49 +00:00
.gitignore add vim temp files (*~) to .gitignore 2011-04-29 15:11:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in build system: add a feature that allows you to pull sources from a git tree instead of the usual tarball 2011-10-09 16:33:59 +00:00
feeds.conf.default switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk rules.mk: provide a LIBGCC_A variable 2011-09-05 19:29:22 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org