openwrtv4/target/linux/lantiq/patches-4.1/0015-MTD-lantiq-xway-remove-endless-loop.patch
John Crispin ff08b09570 lantiq: Add support for linux 4.1
All (still relevant) patches were refresh.
The following patches were dropped because they are applied upstream:
- 0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch
- 0005-MIPS-lantiq-add-reset-controller-api-support.patch
- 0006-MIPS-lantiq-reboot-gphy-on-restart.patch
- 0009-MIPS-lantiq-command-line-work-around.patch
- 0010-MIPS-lantiq-export-soc-type.patch
- 0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch
- 0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46216
2015-07-07 13:43:47 +00:00

41 lines
1.3 KiB
Diff

From 76e153079f02d26e3357302d2886a0c8aaaec64d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 18:02:06 +0200
Subject: [PATCH 15/36] MTD: lantiq: xway: remove endless loop
The reset loop logic could run into a endless loop. Lets fix it as requested.
--> http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/mtd/nand/xway_nand.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/mtd/nand/xway_nand.c
+++ b/drivers/mtd/nand/xway_nand.c
@@ -59,16 +59,22 @@ static u32 xway_latchcmd;
static void xway_reset_chip(struct nand_chip *chip)
{
unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
+ unsigned long timeout;
unsigned long flags;
nandaddr &= ~NAND_WRITE_ADDR;
nandaddr |= NAND_WRITE_CMD;
/* finish with a reset */
+ timeout = jiffies + msecs_to_jiffies(20);
+
spin_lock_irqsave(&ebu_lock, flags);
writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
- while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- ;
+ do {
+ if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+ break;
+ cond_resched();
+ } while (!time_after_eq(jiffies, timeout));
spin_unlock_irqrestore(&ebu_lock, flags);
}