openwrtv4/target/linux/ramips/dts/UR-326N4G.dts
Mathias Kresin 18c64f41c7 treewide: fix button keys codes used in dts
Use keycodes that matches the intended use case based on the label.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:23 +01:00

115 lines
1.7 KiB
Text

/dts-v1/;
#include "rt3050.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "UR-326N4G", "ralink,rt3052-soc";
model = "UPVEL UR-326N4G";
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
gpio-leds {
compatible = "gpio-leds";
3g {
label = "ur-326n4g:green:3g";
gpios = <&gpio0 9 1>;
};
gateway {
label = "ur-326n4g:green:gateway";
gpios = <&gpio0 11 1>;
};
ap {
label = "ur-326n4g:green:ap";
gpios = <&gpio0 12 1>;
};
wps {
label = "ur-326n4g:green:wps";
gpios = <&gpio0 14 1>;
};
station {
label = "ur-326n4g:green:station";
gpios = <&gpio0 13 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset_wps {
label = "reset_wps";
gpios = <&gpio0 10 1>;
linux,code = <KEY_RESTART>;
};
mode {
label = "mode";
gpios = <&gpio0 7 1>;
linux,code = <BTN_0>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4004>;
};
&esw {
mediatek,portmap = <0x2f>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&otg {
status = "okay";
};