openwrtv4/target/linux/ramips/image
Piotr Dymacz f1c193c27e ramips: add support for ALFA Network AWUSFREE1
ALFA Network AWUSFREE1 is an USB Wi-Fi N300 adapter based on MT7628.

Specification:

- MT7628AN (580 MHz)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (MT7628) with external FEM (RFFM4203)
- 2x detachable antennas (RP-SMA)
- ASIX AX88772 USB to Ethernet bridge (connected with MT7628 PHY0)
- 4x LED (2 driven by GPIO)
- 1x button (reset)
- 1x mini USB for host and main power input
- UART header on PCB

Flash instruction:

You can use sysupgrade image directly in vendor firmware which is based
on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot:

1. Power device with reset button pressed and release it after ~5 sec.
2. Setup static IP 192.168.1.2/4 on your PC.
3. Go to 192.168.1.1 in browser and upload "sysupgrade" image.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-22 23:40:11 +01:00
..
lzma-loader ramips: lzma-loader: fix O32 ABI conformance 2016-03-21 13:15:29 +00:00
Makefile build: replace uses of OpenWrt with $(VERSION_DIST) 2018-02-05 10:15:53 +01:00
mt76x8.mk ramips: add support for ALFA Network AWUSFREE1 2018-02-22 23:40:11 +01:00
mt7620.mk ramips: rename TP-Link Archer C20 to TP-Link Archer C20 v1 2018-01-15 21:45:43 +01:00
mt7621.mk ramips: improve GnuBee Personal Cloud Two support 2018-02-20 19:25:17 +01:00
rt288x.mk ramips: use generic board detection for D-Link DAP-1522 A1 2018-02-20 19:25:17 +01:00
rt305x-legacy.mk ramips: use new image build code for WHR-G300N 2018-02-13 10:01:53 +01:00
rt305x.mk ramips: use new image build code for WHR-G300N 2018-02-13 10:01:53 +01:00
rt3883.mk ramips: add support for Loewe WMDR-143N 2017-07-27 09:13:27 +02:00