58 lines
2.1 KiB
Diff
58 lines
2.1 KiB
Diff
From 5f0a1fa77e5d53b8dbb751fcfc59c7ef3d78ddf2 Mon Sep 17 00:00:00 2001
|
|
From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
|
|
Date: Wed, 2 Mar 2016 12:00:11 -0500
|
|
Subject: [PATCH 57/81] mtd: mediatek: device tree docs for MTK Smart Device
|
|
Gen1 NAND
|
|
|
|
This patch adds documentation support for Smart Device Gen1 type of
|
|
NAND controllers.
|
|
|
|
Mediatek's SoC 2701 is one of the SoCs that implements this controller.
|
|
|
|
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
|
|
---
|
|
.../devicetree/bindings/mtd/mtksdg1-nand.txt | 38 ++++++++++++++++++++
|
|
1 file changed, 38 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt
|
|
@@ -0,0 +1,38 @@
|
|
+MTK Smart Device SoCs NAND controller DT binding
|
|
+
|
|
+Required properties:
|
|
+- compatible: Should be "mediatek,mt2701-nfc".
|
|
+- reg: The first contains base physical address and size of
|
|
+ NAND controller's registers. The second contains base
|
|
+ physical address and size of NAND ECC engine.
|
|
+- interrupts: the NFC NFI interrupt, and the NFC ECC interrupt
|
|
+- clocks: NAND controller clocks.
|
|
+- clock-names: NAND controller clocks internal name.
|
|
+- vmch-supply: NAND power supply.
|
|
+- #address-cells: Partition address, should be set 1.
|
|
+- #size-cells: Partition size, should be set 1.
|
|
+
|
|
+Optional properties:
|
|
+
|
|
+nand-on-flash-bbt: Use a flash based bad block table.
|
|
+
|
|
+Optional subnodes:
|
|
+- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
|
|
+
|
|
+Example:
|
|
+
|
|
+ nand: nand@1100d000 {
|
|
+ compatible = "mediatek,mt2701-nfc";
|
|
+ reg = <0 0x1100d000 0 0x1000>, <0 0x1100e000 0 0x1000>;
|
|
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>,
|
|
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
|
|
+ clocks = <&pericfg CLK_PERI_NFI>, <&pericfg CLK_PERI_NFI_ECC>,
|
|
+ <&pericfg CLK_PERI_NFI_PAD>;
|
|
+ clock-names = "nfi_ck", "nfi_ecc_ck", "nfi_pad_ck";
|
|
+ vmch-supply = <&mt6323_vmch_reg>;
|
|
+ status = "disabled";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ ...
|
|
+ };
|